Click for next page ( 41


The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 40
A1 APPENDIX A Dynamic Modulus Ruggedness Data

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FDM2-1 AAT 3 3 0 114 0 0 0 0 6.2 12181 9.8 3.6 5.5 9.3 0.1 FDM2-2 AAT 3 3 1 113 0 1 1 1 6.4 14509 11.4 9.8 9.9 11.8 0.3 FDM2-3 AAT 3 5 0 77 0 0 1 1 6.1 14295 10.7 2.8 5.0 0.5 0.3 FDM2-4 AAT 3 5 1 72 0 1 0 0 6.0 17950 10.0 3.2 5.0 5.9 3.9 FDM2-5 AAT 5 3 0 69 0 1 0 1 5.9 17533 11.2 2.7 5.6 2.1 0.5 FDM2-6 AAT 5 3 1 72 0 0 1 0 6.1 13735 11.4 2.8 5.1 8.4 0.5 FDM2-7 AAT 5 5 0 101 0 1 1 0 5.8 14153 12.3 4.4 6.1 25.8 1.0 FDM2-8 AAT 5 5 1 105 0 0 0 1 6.1 12609 11.4 2.9 4.6 14.5 0.2 FDM3-1 AAT 3 3 0 97 0 0 0 0 5.7 17351 3.6 12.1 11.5 5.9 0.0 FDM3-2 AAT 3 3 1 104 0 1 1 1 5.6 16033 3.7 11.7 11.5 17.7 0.6 FDM3-3 AAT 3 5 0 75 0 0 1 1 5.7 14755 3.9 4.6 5.5 3.0 0.4 FDM3-4 AAT 3 5 1 80 0 1 0 0 5.9 20579 4.6 7.4 9.6 6.4 0.7 FDM3-5 AAT 5 3 0 75 0 1 0 1 5.5 12477 5.2 5.7 6.6 14.6 1.5 FDM3-6 AAT 5 3 1 75 0 0 1 0 5.7 14419 4.9 4.5 5.6 15.4 0.1 FDM3-7 AAT 5 5 0 105 0 1 1 0 5.8 15840 5.6 13.3 13.0 55.3 0.2 FDM3-8 AAT 5 5 1 121 0 0 0 1 5.7 13768 4.1 10.8 10.9 39.8 2.2 FSM4-1 AAT 3 3 0 123 0 0 0 0 6.8 10214 7.3 3.4 4.8 9.4 5.2 FSM4-2 AAT 3 3 1 110 0 1 1 1 7.0 15451 8.5 11.2 10.6 11.4 6.6 FSM4-3 AAT 3 5 0 75 0 0 1 1 6.7 14514 6.8 4.3 4.7 2.9 5.2 FSM4-4 AAT 3 5 1 80 0 1 0 0 6.8 13581 7.3 4.0 6.5 39.2 3.8 FSM4-5 AAT 5 3 0 74 0 1 0 1 6.1 13221 8.8 4.3 5.1 14.0 5.4 FSM4-6 AAT 5 3 1 74 0 0 1 0 5.8 12023 8.3 4.9 5.6 4.2 5.9 FSM4-7 AAT 5 5 0 122 0 1 1 0 6.3 12069 9.0 5.2 6.0 2.0 4.7 FSM4-8 AAT 5 5 1 121 0 0 0 1 6.5 13191 9.0 6.5 6.8 15.3 5.5 FSM7-1 AAT 3 3 0 106 0 0 0 0 5.4 15500 6.5 13.4 12.9 19.0 5.2 FSM7-2 AAT 3 3 1 103 0 1 1 1 5.8 15779 7.2 12.7 12.9 2.1 5.9 FSM7-3 AAT 3 5 0 76 0 0 1 1 6.3 14226 7.0 4.9 6.1 2.6 5.4 FSM7-4 AAT 3 5 1 73 0 1 0 0 6.1 10878 7.0 5.0 6.5 0.7 5.8 FSM7-5 AAT 5 3 0 73 0 1 0 1 5.7 13400 10.6 4.5 6.0 8.0 7.4 FSM7-6 AAT 5 3 1 77 0 0 1 0 5.5 15092 8.4 4.4 6.0 1.0 5.5

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FSM7-7 AAT 5 5 0 121 0 1 1 0 5.4 13454 8.7 13.5 13.3 4.3 4.7 FSM7-8 AAT 5 5 1 117 0 0 0 1 5.8 13894 8.4 12.7 12.4 9.6 5.7 FDM4-1 FHWA 3 3 0 110 0 0 0 0 5.8 15668 12.2 4.3 4.0 11.8 0.2 FDM4-2 FHWA 3 3 1 114 0 1 1 1 5.8 15101 13.9 3.5 3.9 21.2 1.1 FDM4-3 FHWA 3 5 0 76 0 0 1 1 5.8 15507 11.9 3.2 3.2 24.4 1.0 FDM4-4 FHWA 3 5 1 81 0 1 0 0 6.1 14761 14.5 2.7 4.4 12.6 1.4 FDM4-5 FHWA 5 3 0 77 0 1 0 1 5.4 14035 14.4 3.2 4.3 11.2 0.8 FDM4-6 FHWA 5 3 1 75 0 0 1 0 5.7 13469 14.2 3.4 3.4 10.3 0.2 FDM4-7 FHWA 5 5 0 111 0 1 1 0 5.5 15482 15.8 4.4 4.3 23.9 2.1 FDM4-8 FHWA 5 5 1 119 0 0 0 1 5.7 13347 13.7 2.1 4.7 22.2 0.2 FDM5-1 FHWA 3 3 0 113 0 0 0 0 5.9 14749 11.9 3.2 3.4 17.6 0.1 FDM5-2 FHWA 3 3 1 121 0 1 1 1 6.0 14294 14.6 2.9 3.4 12.3 0.9 FDM5-3 FHWA 3 5 0 73 0 0 1 1 6.0 14510 12.1 5.1 4.7 18.5 1.1 FDM5-4 FHWA 3 5 1 75 0 1 0 0 6.3 14473 14.0 4.6 4.7 22.3 1.0 FDM5-5 FHWA 5 3 0 80 0 1 0 1 5.9 14673 15.5 3.5 4.1 4.4 3.6 FDM5-6 FHWA 5 3 1 76 0 0 1 0 5.9 13042 13.8 3.8 3.6 24.2 0.6 FDM5-7 FHWA 5 5 0 124 0 1 1 0 6.3 13369 15.3 2.4 3.0 35.1 1.1 FDM5-8 FHWA 5 5 1 124 0 0 0 1 6.2 13207 14.0 2.7 4.2 15.1 1.4 FSM2-1 FHWA 3 3 0 121 0 0 0 0 6.7 13577 11.5 2.4 4.2 21.0 0.1 FSM2-2 FHWA 3 3 1 126 0 1 1 1 6.5 12985 14.3 2.7 2.9 12.5 0.7 FSM2-3 FHWA 3 5 0 77 0 0 1 1 6.2 14130 12.4 2.4 3.0 12.5 0.2 FSM2-4 FHWA 3 5 1 76 0 1 0 0 6.5 13576 13.8 2.8 2.9 22.2 1.4 FSM2-5 FHWA 5 3 0 75 0 1 0 1 6.5 11572 14.3 3.1 3.9 26.2 1.4 FSM2-6 FHWA 5 3 1 78 0 0 1 0 6.5 10678 15.2 2.9 3.1 14.2 0.5 FSM2-7 FHWA 5 5 0 127 0 1 1 0 6.4 11843 15.6 1.9 3.2 25.5 0.6 FSM2-8 FHWA 5 5 1 126 0 0 0 1 6.0 13041 13.0 2.5 3.0 25.3 1.2 FSM3-1 FHWA 3 3 0 124 0 0 0 0 6.1 13426 12.8 2.7 2.4 8.9 0.3 FSM3-2 FHWA 3 3 1 132 0 1 1 1 5.9 13191 16.8 3.8 4.0 12.4 1.5 FSM3-3 FHWA 3 5 0 75 0 0 1 1 5.9 13981 12.7 3.1 3.5 5.5 0.8 FSM3-4 FHWA 3 5 1 77 0 1 0 0 5.5 14545 16.3 3.1 3.9 21.0 2.1

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FSM3-5 FHWA 5 3 0 86 0 1 0 1 6.6 13940 20.8 2.0 4.4 10.3 7.0 FSM3-6 FHWA 5 3 1 76 0 0 1 0 6.4 13501 13.6 2.8 3.7 9.0 1.0 FSM3-7 FHWA 5 5 0 126 0 1 1 0 6.3 12187 16.4 1.8 3.2 12.6 1.3 FSM3-8 FHWA 5 5 1 128 0 0 0 1 6.5 12399 14.6 1.7 2.5 6.9 0.5 FDM2-1 AAT 19 3 0 89 0 0 0 0 6.2 1266 35.4 0.8 8.5 22.9 1.5 FDM2-2 AAT 19 3 1 114 0 1 1 1 6.4 1077 37.2 0.7 12.0 14.7 1.8 FDM2-3 AAT 19 5 0 59 0 0 1 1 6.1 1204 37.4 2.0 6.6 15.8 1.7 FDM2-4 AAT 19 5 1 55 0 1 0 0 6 1722 37.7 1.4 14.2 24.5 1.1 FDM2-5 AAT 21 3 0 75 0 1 0 1 5.9 1246 37.9 1.0 7.9 25.4 2.3 FDM2-6 AAT 21 3 1 64 0 0 1 0 6.1 1060 36.0 1.4 8.6 5.2 2.5 FDM2-7 AAT 21 5 0 83 0 1 1 0 5.8 1512 39.4 0.6 12.0 28.0 2.9 FDM2-8 AAT 21 5 1 100 0 0 0 1 6.1 835 36.1 2.8 7.1 7.8 1.6 FDM3-1 AAT 19 3 0 99 0 0 0 0 5.7 1755 32.0 1.9 11.8 11.3 4.9 FDM3-2 AAT 19 3 1 114 0 1 1 1 5.6 1645 31.2 0.5 11.8 0.1 6.4 FDM3-3 AAT 19 5 0 80 0 0 1 1 5.7 1264 33.4 2.1 6.1 6.7 6.9 FDM3-4 AAT 19 5 1 63 0 1 0 0 5.9 1601 35.4 1.9 12.3 19.2 4.8 FDM3-5 AAT 21 3 0 89 0 1 0 1 5.5 1133 29.7 2.2 8.9 4.9 0.3 FDM3-6 AAT 21 3 1 86 0 0 1 0 5.7 1168 33.3 2.1 8.1 30.0 9.8 FDM3-7 AAT 21 5 0 113 0 1 1 0 5.8 1457 31.5 0.8 10.5 15.1 4.7 FDM3-8 AAT 21 5 1 109 0 0 0 1 5.7 1450 33.0 1.3 9.4 32.0 6.1 FSM4-1 AAT 19 3 0 111 0 0 0 0 6.8 1292 27.7 0.6 6.0 12.7 5.2 FSM4-2 AAT 19 3 1 126 0 1 1 1 7 1608 29.2 2.1 9.8 15.5 8.3 FSM4-3 AAT 19 5 0 73 0 0 1 1 6.7 1613 27.3 0.9 4.6 11.5 3.1 FSM4-4 AAT 19 5 1 77 0 1 0 0 6.8 1671 27.3 1.4 13.7 3.6 4.7 FSM4-5 AAT 21 3 0 88 0 1 0 1 6.1 1346 28.7 0.8 10.5 39.4 2.9 FSM4-6 AAT 21 3 1 86 0 0 1 0 5.8 1382 26.5 1.0 4.0 61.4 8.8 FSM4-7 AAT 21 5 0 109 0 1 1 0 6.3 1369 26.7 1.5 6.2 5.4 6.2 FSM4-8 AAT 21 5 1 113 0 0 0 1 6.5 1234 28.7 1.6 6.6 1.4 5.6 FSM7-1 AAT 19 3 0 101 0 0 0 0 5.4 2825 24.2 0.9 7.1 1.8 11.2 FSM7-2 AAT 19 3 1 111 0 1 1 1 5.8 1770 27.1 1.3 6.7 35.8 8.0

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FSM7-3 AAT 19 5 0 68 0 0 1 1 6.3 1737 26.8 0.9 5.8 8.3 6.3 FSM7-4 AAT 19 5 1 94 0 1 0 0 6.1 1259 27.7 0.8 6.1 5.7 3.9 FSM7-5 AAT 21 3 0 91 0 1 0 1 5.7 1295 28.1 0.8 4.4 18.4 5.9 FSM7-6 AAT 21 3 1 70 0 0 1 0 5.5 1681 27.9 0.9 7.1 32.0 5.2 FSM7-7 AAT 21 5 0 111 0 1 1 0 5.4 1429 27.8 0.6 7.2 51.4 7.6 FSM7-8 AAT 21 5 1 110 0 0 0 1 5.8 1485 26.3 1.0 7.7 34.6 4.8 FDM4-1 FHWA 19 3 0 109 0 0 0 0 5.8 1984 34.4 1.6 9.7 11.6 0.5 FDM4-2 FHWA 19 3 1 107 0 1 1 1 5.8 1558 39.1 1.6 9.6 30.2 2.4 FDM4-3 FHWA 19 5 0 67 0 0 1 1 5.8 1714 36.5 1.8 9.5 17.5 0.7 FDM4-4 FHWA 19 5 1 69 0 1 0 0 6.1 1395 38.4 2.3 9.2 10.5 1.1 FDM4-5 FHWA 21 3 0 64 0 1 0 1 5.4 1294 36.7 2.4 11.2 14.7 6.1 FDM4-6 FHWA 21 3 1 67 0 0 1 0 5.7 1199 36.3 2.8 7.4 12.8 0.6 FDM4-7 FHWA 21 5 0 105 0 1 1 0 5.5 1423 37.2 1.9 18.6 19.5 0.8 FDM4-8 FHWA 21 5 1 106 0 0 0 1 5.7 1308 36.4 1.8 14.8 12.5 0.8 FDM5-1 FHWA 19 3 0 107 0 0 0 0 5.9 1742 35.3 1.6 9.9 8.1 1.7 FDM5-2 FHWA 19 3 1 105 0 1 1 1 6 1476 35.9 1.5 6.8 8.4 0.4 FDM5-3 FHWA 19 5 0 66 0 0 1 1 6 1477 38.7 1.9 9.5 5.1 0.5 FDM5-4 FHWA 19 5 1 66 0 1 0 0 6.3 1392 39.8 2.6 10.5 14.1 1.4 FDM5-5 FHWA 21 3 0 65 0 1 0 1 5.9 1216 42.2 3.0 10.2 4.0 1.6 FDM5-6 FHWA 21 3 1 64 0 0 1 0 5.9 1042 39.3 2.4 8.1 29.3 0.3 FDM5-7 FHWA 21 5 0 101 0 1 1 0 6.3 1079 40.1 2.1 11.0 13.1 0.3 FDM5-8 FHWA 21 5 1 108 0 0 0 1 6.2 1127 37.5 1.8 10.2 9.8 1.8 FSM2-1 FHWA 19 3 0 114 0 0 0 0 6.7 1820 30.0 2.7 7.9 10.1 0.5 FSM2-2 FHWA 19 3 1 113 0 1 1 1 6.5 1628 33.4 2.6 9.7 5.6 0.5 FSM2-3 FHWA 19 5 0 72 0 0 1 1 6.2 1740 31.9 2.6 7.5 20.3 0.4 FSM2-4 FHWA 19 5 1 69 0 1 0 0 6.5 1708 33.2 3.0 7.3 23.5 0.5 FSM2-5 FHWA 21 3 0 67 0 1 0 1 6.5 1259 32.2 3.6 4.5 43.1 1.0 FSM2-6 FHWA 21 3 1 72 0 0 1 0 6.5 1182 32.7 6.1 7.5 19.2 1.6 FSM2-7 FHWA 21 5 0 113 0 1 1 0 6.4 1135 35.1 3.0 7.1 33.0 0.7 FSM2-8 FHWA 21 5 1 116 0 0 0 1 6 1628 31.5 3.0 8.1 3.9 0.3

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No = 0 Milled = 0 Teflon = 0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes = 1 Sawed = 1 Latex = 1 % kPa Degree % % % % FSM3-1 FHWA 19 3 0 119 0 0 0 0 6.1 1760 30.4 1.8 7.0 23.3 0.7 FSM3-2 FHWA 19 3 1 109 0 1 1 1 5.9 1835 28.4 1.7 7.7 18.1 3.9 FSM3-3 FHWA 19 5 0 74 0 0 1 1 5.9 1758 30.8 2.2 5.4 14.2 0.8 FSM3-4 FHWA 19 5 1 71 0 1 0 0 5.5 1636 32.9 2.6 6.6 13.4 0.5 FSM3-5 FHWA 21 3 0 76 0 1 0 1 6.6 1297 35.9 3.5 6.6 11.1 4.5 FSM3-6 FHWA 21 3 1 69 0 0 1 0 6.4 1426 31.6 3.1 6.5 13.1 1.6 FSM3-7 FHWA 21 5 0 111 0 1 1 0 6.3 1654 36.7 1.8 7.8 22.8 4.2 FSM3-8 FHWA 21 5 1 113 0 0 0 1 6.5 1146 33.5 2.5 6.4 7.5 1.8 FDM2-1 AAT 39 3 0 223 0 0 0 0 6.2 170 23.5 2.8 13.8 9.4 0.5 FDM2-2 AAT 39 3 1 288 0 1 1 1 6.4 131 23.0 3.2 14.8 4.3 0.3 FDM2-3 AAT 39 5 0 289 0 0 1 1 6.1 131 23.0 2.6 15.3 14.6 1.2 FDM2-4 AAT 39 5 1 234 0 1 0 0 6 162 22.4 2.7 12.8 17.2 1.3 FDM2-5 AAT 41 3 0 241 0 1 0 1 5.9 156 22.0 3.1 14.0 32.9 0.1 FDM2-6 AAT 41 3 1 235 0 0 1 0 6.1 161 22.6 3.1 16.0 30.8 0.1 FDM2-7 AAT 41 5 0 197 0 1 1 0 5.8 191 21.7 3.7 15.5 21.8 1.1 FDM2-8 AAT 41 5 1 338 0 0 0 1 6.1 112 22.3 4.0 15.8 2.8 0.4 FDM3-1 AAT 39 3 0 119 0 0 0 0 5.7 164 30.4 3.2 32.6 15.9 3.9 FDM3-2 AAT 39 3 1 176 0 1 1 1 5.6 111 34.5 3.7 34.0 82.3 6.0 FDM3-3 AAT 39 5 0 92 0 0 1 1 5.7 121 13.3 4.2 26.1 43.4 7.4 FDM3-4 AAT 39 5 1 81 0 1 0 0 5.9 138 14.6 4.7 40.7 22.4 17.6 FDM3-5 AAT 41 3 0 109 0 1 0 1 5.5 104 14.5 3.7 11.5 11.6 8.2 FDM3-6 AAT 41 3 1 78 0 0 1 0 5.7 143 11.3 4.7 13.1 55.8 8.7 FDM3-7 AAT 41 5 0 134 0 1 1 0 5.8 145 27.2 2.9 22.5 25.2 5.4 FDM3-8 AAT 41 5 1 179 0 0 0 1 5.7 108 17.5 2.9 14.9 50.8 9.6 FSM4-1 AAT 39 3 0 155 0 0 0 0 6.8 125 23.7 2.9 10.9 22.1 7.6 FSM4-2 AAT 39 3 1 142 0 1 1 1 7 138 29.1 3.2 19.4 17.2 6.1 FSM4-3 AAT 39 5 0 51 0 0 1 1 6.7 223 19.8 3.4 38.2 9.8 4.1 FSM4-4 AAT 39 5 1 81 0 1 0 0 6.8 140 20.1 4.8 45.6 22.6 4.9 FSM4-5 AAT 41 3 0 90 0 1 0 1 6.1 126 19.5 4.0 25.7 6.9 7.0 FSM4-6 AAT 41 3 1 66 0 0 1 0 5.8 172 16.8 5.3 11.6 1.8 6.9

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FSM4-7 AAT 41 5 0 135 0 1 1 0 6.3 145 27.3 2.8 26.7 41.7 19.1 FSM4-8 AAT 41 5 1 108 0 0 0 1 6.5 179 18.0 2.3 41.2 19.5 5.6 FSM7-1 AAT 39 3 0 87 0 0 0 0 5.4 221 25.4 5.7 11.0 28.0 1.5 FSM7-2 AAT 39 3 1 81 0 1 1 1 5.8 239 29.5 5.3 20.5 13.3 1.2 FSM7-3 AAT 39 5 0 74 0 0 1 1 6.3 155 21.4 6.8 15.7 1.4 0.5 FSM7-4 AAT 39 5 1 62 0 1 0 0 6.1 179 25.9 7.6 21.3 18.1 1.4 FSM7-5 AAT 41 3 0 64 0 1 0 1 5.7 159 21.3 6.8 10.1 30.7 0.8 FSM7-6 AAT 41 3 1 58 0 0 1 0 5.5 198 22.6 7.2 13.6 80.3 2.9 FSM7-7 AAT 41 5 0 102 0 1 1 0 5.4 190 30.6 2.7 24.1 3.4 1.2 FSM7-8 AAT 41 5 1 110 0 0 0 1 5.8 253 21.9 2.7 10.2 0.8 0.4 FSM2-1 FHWA 39 3 0 127 0 0 0 0 6.7 181 26.2 3.6 6.6 14.0 0.8 FSM2-2 FHWA 39 3 1 133 0 1 1 1 6.5 146 33.8 3.4 8.2 3.5 1.7 FSM2-3 FHWA 39 5 0 76 0 0 1 1 6.2 160 29.8 3.7 7.0 26.0 2.4 FSM2-4 FHWA 39 5 1 72 0 1 0 0 6.5 155 29.6 4.7 7.8 14.7 0.7 FSM2-5 FHWA 41 3 0 74 0 1 0 1 6.5 121 31.9 7.1 21.5 56.4 2.5 FSM2-6 FHWA 41 3 1 79 0 0 1 0 6.5 97 30.5 4.8 6.7 24.9 3.3 FSM2-7 FHWA 41 5 0 158 0 1 1 0 6.4 93 27.5 4.1 22.2 32.5 3.7 FSM2-8 FHWA 41 5 1 135 0 0 0 1 6 161 26.1 3.1 7.5 12.7 2.3 FSM3-1 FHWA 39 3 0 136 0 0 0 0 6.1 179 28.2 2.7 8.5 20.5 1.9 FSM3-2 FHWA 39 3 1 165 0 1 1 1 5.9 161 34.5 2.4 10.3 9.8 5.0 FSM3-3 FHWA 39 5 0 79 0 0 1 1 5.9 148 32.8 3.9 6.2 16.9 2.6 FSM3-4 FHWA 39 5 1 77 0 1 0 0 5.5 145 39.1 4.3 9.0 30.9 5.9 FSM3-5 FHWA 41 3 0 98 0 1 0 1 6.6 77 38.1 6.3 15.8 16.6 2.2 FSM3-6 FHWA 41 3 1 133 0 0 1 0 6.4 159 25.6 2.7 7.7 11.5 0.6 FSM3-7 FHWA 41 5 0 154 0 1 1 0 6.3 100 29.6 3.6 14.6 34.0 0.8 FSM3-8 FHWA 41 5 1 144 0 0 0 1 6.5 114 26.2 3.4 8.5 15.6 1.8 FDM2-1 AAT 39 3 0 196 135 0 0 6.2 189 14.0 2.1 11.2 10.7 2.6 FDM2-2 AAT 39 3 1 128 145 1 1 6.4 409 9.7 2.5 6.4 12.5 0.0 FDM2-3 AAT 39 5 0 87 135 1 1 6.1 428 8.8 1.7 6.3 0.1 0.8 FDM2-4 AAT 39 5 1 79 145 0 0 6 676 7.0 2.9 8.6 12.6 1.5

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FDM2-5 AAT 41 3 0 136 145 0 1 5.9 474 8.3 1.7 7.9 40.3 1.0 FDM2-6 AAT 41 3 1 187 135 1 0 6.1 198 14.5 1.6 8.4 12.8 1.5 FDM2-7 AAT 41 5 0 214 145 1 0 5.8 173 13.9 1.7 11.7 17.3 1.8 FDM2-8 AAT 41 5 1 146 135 0 1 6.1 452 5.5 1.0 8.3 7.3 0.1 FDM3-1 AAT 39 3 0 90 135 0 0 5.7 545 13.5 1.2 19.4 0.5 6.2 FDM3-2 AAT 39 3 1 77 145 1 1 5.6 253 21.9 2.6 20.9 53.3 2.2 FDM3-3 AAT 39 5 0 84 135 1 1 5.7 442 12.2 2.2 12.6 35.4 6.2 FDM3-4 AAT 39 5 1 56 145 0 0 5.9 871 9.6 1.4 7.9 84.2 10.6 FDM3-5 AAT 41 3 0 124 145 0 1 5.5 298 16.3 1.5 19.6 16.7 4.7 FDM3-6 AAT 41 3 1 76 135 1 0 5.7 648 8.4 1.8 10.1 9.3 6.0 FDM3-7 AAT 41 5 0 35 145 1 0 5.8 560 26.2 3.1 51.3 5.4 6.1 FDM3-8 AAT 41 5 1 92 135 0 1 5.7 213 17.1 2.8 10.9 48.3 1.7 FDM4-1 AAT 39 3 0 63 135 1 0 0 5.8 632 14.6 2.0 10.6 8.2 0.7 FDM4-2 AAT 39 3 1 74 145 1 1 1 5.8 668 17.5 1.6 4.7 4.8 4.3 FDM4-3 AAT 39 5 0 40 135 1 1 1 5.8 672 19.4 2.4 24.5 6.0 3.6 FDM4-4 AAT 39 5 1 45 145 1 0 0 6.1 678 15.3 1.9 4.3 5.4 0.3 FDM4-5 AAT 41 3 0 42 145 1 0 1 5.4 499 14.7 25.4 40.4 3.6 3.4 FDM4-6 AAT 41 3 1 30 135 1 1 0 5.7 557 23.1 3.0 8.4 32.3 6.5 FDM4-7 AAT 41 5 0 86 145 1 1 0 5.5 589 15.2 1.9 11.0 14.3 1.0 FDM4-8 AAT 41 5 1 68 135 1 0 1 5.7 639 17.1 1.9 5.7 20.5 3.2 FDM5-1 AAT 39 3 0 98 135 1 0 0 5.9 598 12.5 1.6 24.2 19.0 1.2 FDM5-2 AAT 39 3 1 111 145 1 1 1 6 681 11.0 1.3 6.2 13.0 0.9 FDM5-3 AAT 39 5 0 63 135 1 1 1 6 630 13.3 2.0 9.7 9.0 2.9 FDM5-4 AAT 39 5 1 49 145 1 0 0 6.3 680 14.1 2.3 17.3 9.4 0.6 FDM5-5 AAT 41 3 0 47 145 1 0 1 5.9 490 17.6 3.0 19.3 11.9 3.1 FDM5-6 AAT 41 3 1 44 135 1 1 0 5.9 710 17.4 2.3 4.7 13.2 3.5 FDM5-7 AAT 41 5 0 75 145 1 1 0 6.3 628 13.8 1.6 12.7 3.3 2.9 FDM5-8 AAT 41 5 1 75 135 1 0 1 6.2 620 15.5 1.4 15.9 5.2 1.0 FSM2-1 FHWA 39 3 0 78 135 1 0 0 6.7 528 20.0 2.5 4.4 6.8 1.3 FSM2-2 FHWA 39 3 1 127 145 1 1 1 6.5 339 24.2 1.7 6.2 12.3 0.6

OCR for page 40
Friction ID Lab Test Transfer Fluid Confining Membrane End Reducer Air Dynamic Phase Load Strain Strain Phase Temp Time Water = 0 Strain Pressure No =0 Milled =0 Teflon =0 Voids Modulus Angle Se Se Uniformity Uniformity C min Air = 1 mm/mm kPa Yes =1 Sawed =1 Latex =1 % kPa Degree % % % % FSM2-3 FHWA 39 5 0 43 135 1 1 1 6.2 517 21.6 3.0 31.5 15.3 1.6 FSM2-4 FHWA 39 5 1 96 145 1 0 0 6.5 267 25.2 2.9 5.4 23.3 0.4 FSM2-5 FHWA 41 3 0 45 145 1 0 1 6.5 575 19.7 2.6 14.9 31.0 3.1 FSM2-6 FHWA 41 3 1 62 135 1 1 0 6.5 235 26.1 4.4 7.9 17.1 1.4 FSM2-7 FHWA 41 5 0 73 145 1 1 0 6.4 480 18.7 2.2 17.3 37.6 4.4 FSM2-8 FHWA 41 5 1 118 135 1 0 1 6 254 25.4 2.1 5.9 13.1 1.1 FSM3-1 FHWA 39 3 0 89 135 1 0 0 6.1 595 19.4 1.7 21.3 31.3 4.6 FSM3-2 FHWA 39 3 1 105 145 1 1 1 5.9 410 18.8 1.6 7.1 40.9 6.0 FSM3-3 FHWA 39 5 0 50 135 1 1 1 5.9 580 26.1 2.7 16.8 48.8 7.7 FSM3-4 FHWA 39 5 1 63 145 1 0 0 5.5 427 22.1 2.7 11.1 17.9 3.2 FSM3-5 FHWA 41 3 0 45 145 1 0 1 6.6 837 22.5 2.2 15.5 5.8 6.7 FSM3-6 FHWA 41 3 1 63 135 1 1 0 6.4 368 26.3 4.3 5.7 26.4 4.8 FSM3-7 FHWA 41 5 0 94 145 1 1 0 6.3 650 15.8 1.8 24.2 19.8 1.4 FSM3-8 FHWA 41 5 1 150 135 1 0 1 6.5 173 34.5 2.3 16.6 62.4 8.1 FSM4-1 FHWA 39 3 0 119 135 1 0 0 6.8 310 18.8 1.8 8.8 24.5 5.5 FSM4-2 FHWA 39 3 1 143 145 1 1 1 7 259 18.9 1.8 7.4 22.4 6.3 FSM4-3 FHWA 39 5 0 83 135 1 1 1 6.7 710 15.7 1.6 8.0 37.7 3.1 FSM4-4 FHWA 39 5 1 100 145 1 0 0 6.8 372 19.7 2.2 19.9 53.5 6.5 FSM4-5 FHWA 41 3 0 147 145 1 0 1 6.1 371 17.8 2.2 11.9 35.6 5.1 FSM4-6 FHWA 41 3 1 97 135 1 1 0 5.8 724 9.6 2.0 8.6 13.6 5.4 FSM4-7 FHWA 41 5 0 123 145 1 1 0 6.3 374 16.5 2.5 9.9 35.2 7.4 FSM4-8 FHWA 41 5 1 136 135 1 0 1 6.5 423 16.0 2.1 6.8 26.5 2.1 FSM7-1 FHWA 39 3 0 108 135 1 0 0 5.4 670 15.8 1.8 8.8 24.5 5.5 FSM7-2 FHWA 39 3 1 109 145 1 1 1 5.8 710 14.4 1.8 7.4 22.4 6.3 FSM7-3 FHWA 39 5 0 112 135 1 1 1 6.3 620 14.6 1.6 8.0 37.7 3.1 FSM7-4 FHWA 39 5 1 89 145 1 0 0 6.1 691 14.4 2.2 19.9 53.5 6.5 FSM7-5 FHWA 41 3 0 66 145 1 0 1 5.7 713 11.6 2.2 11.9 35.6 5.1 FSM7-6 FHWA 41 3 1 86 135 1 1 0 5.5 732 13.4 2.0 8.6 13.6 5.4 FSM7-7 FHWA 41 5 0 120 145 1 1 0 5.4 667 11.5 2.5 9.9 35.2 7.4 FSM7-8 FHWA 41 5 1 127 135 1 0 1 5.8 678 14.0 2.1 6.8 26.5 2.1