Skip to main content

Test Equipment for Use in Determining Classifications of Combustible Dusts (1979) / Chapter Skim
Currently Skimming:

Appendix B: Measurement of Temperature Distribution on Hot Plate
Pages 28-30

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 28...
... The measured surface temperature usually will be lower than the set point temperature of the pa ate depending on the detailed construction of the thermocouple. This is immaterial and can be ignored.
Read the entire page →
From page 29...
... o ~ us red z H ED
Read the entire page →
From page 30...
... / / / / / - -- 1 1 1 344 346 342 30 Plate Temperature: 350° Scale 1:1 343 345345 346\ \ \ % \ \ \ \ \ \ \ \ % \ 340 ~ 6 347 FIGURE B-2 ~ 346 I I 1 ~ ~ ~ °C / /
Read the entire page →

Key Terms

  • detailed construction
  • surface temperature
  • measured surface
  • glass rod
  • essential requirement

  • insulating material
  • ate depending
  • fixed load
  • moves freely
  • temperature usually

  • accurate measurement
  • temperature differences
  • tubular guide
  • vertical glass
  • steady temperature

  • temperature measurements
  • pa ate
  • red z
  • mm apart
  • absolute values


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.