Proceedings of a Workshop on Materials State Awareness (2008) / Chapter Skim
Currently Skimming:
Appendix B Workshop Agenda and List of Attendees
Appendix B Workshop Agenda and List of Attendees
Pages 47-52
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 47... ...
Setting the Stage: Introduction from the Kumar Jata Sponsor Air Force Research Laboratory 9:00 a.m. Q&A Session Edgar Starke, Organizing Panel Chair University of Virginia SESSION I: KEY ISSUES FOR MATERIALS STATE AWARENESS 9:45 a.m.
|
From page 48... ...
The Integrated Structural Health/Life Joseph Gallagher Management of Airframe Structures Independent Consultant Depends on Characterizing the State of the Material as a Function of Time in Service 4:30 p.m. Material Property Measurement using Shridhar Nath NDE methods at GE GE Global Research Laboratory 5:00 p.m.
|
From page 49... ...
We Find What We Seek John Duke Virginia Polytechnic Institute and State University 10:15 a.m. Panel Q&A Jiangang Sun, Organizing Panel Member Argonne National Laboratory SESSION IV: MATERIALS STATE AWARENESS APPLICATION ISSUES 10:45 a.m.
|
From page 50... ...
William Curtin, Brown University Boro Djordjevic, Materials and Sensor Technologies, Inc. John Duke, Virginia Polytechnic Institute and State University Charles Farrar, Los Alamos National Laboratory Thomas Farris, Purdue University Gary Fischman, National Materials Advisory Board Garth Frazier, Miltec Corporation Joe Gallagher, Consultant Victor Giurgiutiu, Air Force Office of Scientific Research Kumar Jata, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Reji John, Air Force Research Laboratory Materials and Manufacturing Directorate Warren Johnson, Universal Technology Corporation Ronald Kerans, Air Force Research Laboratory Manufacturing Technology Division Jeremy Knopp, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Bernd Köhler, Fraunhofer Institute for Non-Destructive Testing Robert Latiff, Science Applications International Corporation
|
From page 51... ...
Appendix B 51 Eric Lindgren, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch James Malas, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Robert Marshall, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Steven Martin, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Siamack Mazdiyasni, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Steve McKnight, Army Research Laboratory Enrique Medina, Radiance Technologies William Meeker, Iowa State University Emily Ann Meyer, National Materials Advisory Board Brajendra Mishra, Colorado School of Mines Michael Moloney, National Materials Advisory Board Stephen Mott, Air Force Research Laboratory, Sensors Research Directorate Shridhar Nath, GE Global Research Center Craig Neslen, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Matt O'Keefe, Missouri Institute of Science and Technology David Olson, Colorado School of Mines Donald Palmer, Boeing Phantom Works DannyParker, Miltec Corporation Robert Rapson, Air Force Research Laboratory Materials and Manufacturing Directorate Stanislav Rokhlin, Ohio State University Shamachary Sathish, University of Dayton Research Institute Robert Schafrik, GE Aviation Kevin Smith, Pratt & Whitney R Joe Stanley, Missouri Institute of Science and Technology Edgar Starke, University of Virginia Jiangang Sun, Argonne National Laboratory Bruce Thompson, Iowa State University Teri Thorowgood, National Materials Advisory Board John Venables, Consultant to Defense Advanced Research Projects Agency/Defense Science Office Charles Ward, Air Force Research Laboratory Materials and Manufacturing Directorate's Nondestructive Evaluation Branch Joe Wells, JMW Associates Reza Zoughi, Missouri Institute of Science and Technology
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.