Ruggedness Testing of the Dynamic Modulus and Flow Number Tests with the Simple Performance Tester (2008) / Chapter Skim
Currently Skimming:
Pages 52-58
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 52... ...
C1 A P P E N D I X C Dynamic Modulus Equipment Effects Data
|
From page 53... ...
Dynamic modulus data for ITC equipment.
|
From page 54... ...
. Specimen Temp C Freq Hz Conf Pressure KPa Dynamic Modulus MPa Phase Angle ° Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity ° 109 35 0.1 140 923 20.1 4.4 103.8 7.4 52.5 2.0 109 35 0.01 140 733 14.1 1.2 79.8 6.9 54.6 1.9 114 35 10 140 2410 28.6 7.1 151.8 8.4 17.2 1.0 114 35 1 140 1342 24.7 1.7 100.5 5.2 8.1 1.6 114 35 0.1 140 918 18.8 2.8 87.0 4.6 0.5 1.0 114 35 0.01 140 742 13.1 1.5 70.3 5.4 2.4 0.1 115 35 10 140 2570 29.2 7.2 167.9 8.9 3.5 1.3 115 35 1 140 1403 25.0 1.7 100.9 5.3 5.3 1.7 115 35 0.1 140 953 19.4 1.7 87.3 5.0 13.1 0.9 115 35 0.01 140 762 13.2 8.1 67.7 10.0 17.8 0.7 118 35 10 140 2711 29.2 8.0 158.8 10.2 17.4 0.8 118 35 1 140 1468 25.2 2.1 91.4 6.6 10.5 1.0 118 35 0.1 140 988 19.1 5.0 80.7 8.2 5.1 0.3 118 35 0.01 140 798 12.8 15.6 60.1 17.9 1.8 0.2
|
From page 55... ...
Dynamic modulus data for IPC equipment.
|
From page 56... ...
C5 Specimen Temp C Freq Hz Conf Pressure kPa Dynamic Modulus MPa Phase Angle ° Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity ° 111 35 1 140 1336 27.1 2.5 -204.6 4.4 14.4 0.8 111 35 0.1 140 868 21.9 2.0 -199.1 5.7 13.9 0.9 111 35 0.01 140 698 16.0 0.9 -147.5 6.1 12.5 1.1 112 35 10 140 2268 31.6 5.2 -402.1 9.8 6.9 0.7 112 35 1 140 1233 28.2 2.5 -248.8 5.0 4.9 0.8 112 35 0.1 140 820 23.1 1.7 -181.6 5.1 4.0 0.9 112 35 0.01 140 685 16.8 0.8 -102.3 6.5 3.6 0.8 117 35 10 140 2438 30.9 3.3 -228.5 8.1 11.3 1.0 117 35 1 140 1275 25.8 2.1 -58.7 2.6 11.8 0.8 117 35 0.1 140 829 19.4 1.4 -30.4 2.9 11.5 0.7 117 35 0.01 140 679 13.8 0.8 -29.7 5.8 10.3 0.8 119 35 10 140 2271 30.4 2.8 -321.2 8.4 9.4 0.7 119 35 1 140 1245 26.2 2.0 -182.3 4.1 9.2 0.7 119 35 0.1 140 813 21.2 1.8 -140.0 4.7 9.4 0.6 119 35 0.01 140 664 15.6 0.8 -101.5 7.9 9.3 0.6 Table C2. (Continued)
|
From page 57... ...
Dynamic modulus data for MDTS equipment.
|
From page 58... ...
C7 Specimen Temp C Freq Hz Conf Pressure kPa Dynamic Modulus MPa Phase Angle ° Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity ° 111 35 1 140 1123 26.8 0.3 10.8 2.6 12.4 0.7 111 35 0.1 140 714 19.8 0.1 13.2 2.9 13.7 0.5 111 35 0.01 140 555 13.8 0.1 24.2 3.8 12.2 0.3 113 35 10 140 2390 29.3 0.9 179.9 3.7 17.2 1.0 113 35 1 140 1196 26.1 0.4 131.0 3.0 22.3 2.1 113 35 0.1 140 780 19.4 0.1 98.2 3.5 23.5 2.4 113 35 0.01 140 680 15.2 0.6 106.0 15.1 41.1 4.4 116 35 10 140 2149 31.2 1.1 237.4 3.6 17.1 1.2 116 35 1 140 991 28.0 0.5 45.4 2.7 17.1 2.0 116 35 0.1 140 597 22.8 0.1 18.9 4.0 11.1 1.8 116 35 0.01 140 493 17.5 0.1 46.5 4.8 2.8 1.4 120 35 10 140 2190 31.7 1.3 203.3 4.2 4.1 2.4 120 35 1 140 1153 27.4 0.4 76.3 2.5 9.7 2.1 120 35 0.1 140 765 20.7 0.1 71.0 3.0 11.2 1.7 120 35 0.01 140 672 19.2 0.4 90.6 41.8 80.0 3.6 Table C3. (Continued)
|
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.