Skip to main content

Design of Concrete Structures Using High-Strength Steel Reinforcement (2011) / Chapter Skim
Currently Skimming:

Appendices
Pages 72-72

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 72...
... . Titles of Appendices A through M are as follows: Appendix A: Material Properties Appendix B: Flexural Resistance of Members with Reinforcing Bars Lacking Well-Defined Yield Plateau Appendix C: Strain Limits for Tension-Controlled/Compression-Controlled and Strains to Allow Negative Moment Redistribution Appendix D: Flexure Beam Tests Appendix E: Fatigue of High-Strength Reinforcing Steel Appendix F: Shear Beam Tests Appendix G: Analytical Studies of Columns Appendix H: Beam Splice Tests Appendix I: Crack Control Appendix J: Survey Results Appendix K: Design Examples Appendix L: Proposed Changes to Section 5 of the AASHTO LRFD Specification Appendix M: 2010 AASHTO Bridge Committee Agenda Item A P P E N D I C E S Structural Concrete Design with High-Strength Steel Reinforcement
Read the entire page →

Key Terms

  • tests appendix
  • allow negative
  • lrfd specification
  • proposed changes
  • agenda item

  • moment redistribution
  • steel reinforcement
  • aashto bridge
  • bridge committee
  • committee agenda

  • shear beam
  • redistribution appendix
  • structural concrete
  • specification appendix
  • flexure beam

  • splice tests
  • reinforcing bars
  • concrete design
  • negative moment
  • bars lacking

  • flexural resistance
  • beam splice
  • aashto lrfd
  • columns appendix
  • reinforcing steel

  • results appendix
  • examples appendix
  • material properties
  • strain limits
  • survey results


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.