Skip to main content

Variability of Ignition Furnace Correction Factors (2017) / Chapter Skim
Currently Skimming:


Pages 74-75

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 74...
... B-1 Summary States Test Method Compared with AASHTO T 308 State: Arizona Test Method – ARIZ 427a Differences compared to AASHTO T 308 • Separate test method for mixes containing RAP (ARIZ 428) • Test sample must be within ±150 g of calibration sample mass • Sample size uses a range based on NMAS • If calibration factor exceeds 1.0% at 1,000°F, repeat test at 900°F.
Read the entire page →
From page 75...
... B-2 • New calibration factor required when aggregate bin % change is ±4.0 • Calibration factor verified weekly State: Oklahoma Test Method – OHD L-26 (Method A) Differences compared to AASHTO T 308 • Minimum sample size slightly different, and based on maximum aggregate size (not NMAS)
Read the entire page →

Key Terms



This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More information on Chapter Skim is available.