Skip to main content

Developing Data-Input Standards for Computerized Maintenance Management Systems Summary of a Symposium/Workshop (1994) / Chapter Skim
Currently Skimming:

HOW THE CMMS STANDARDS EFFORT WOULD BE CARRIED OUT BY ASTM
Pages 18-20

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 18...
... HOW THE CMMS STANDARDS EFFORT WOULD BE CARRIED Olfr BY ASTM Francoise Szigeti International Center for Facilities Computerized Maintenance Management Systems (CMMS) are within scope of ASTM Committee E06 on Buildings Chairman of E06 is Jim Gross of NIST Building and Fire Research Laboratory _ He heartily supports this effort · Propose CMMS standards be developed in E06.25 on whole Buildings and Facilities SUPPORT FROM ASTM SUBCOMMITTEE E06.25 ON WHOLE BUILDINGS AND FACILITIES CMMS is within the scope of E06.25 _ Chairman of E06.25 is Gerald Davis, President of the International Center for Facilities _ He is also 2nd Vice Chairman of E06.
Read the entire page →
From page 19...
... Now, in 1992, work is under way, or standards have been developed, in several subject areas, such as: Objective rating scales for the quality and functionality of office facilities, for better selection from among space offered for rent or occupancy, and matching of occupants to facilities at lowest cost.
Read the entire page →
From page 20...
... TASK GROUPS IN ASTM E06~25 Task Group E06.25.02 on Rating Serviceability of Whole Buildings and Facilities Task Group E06.25.07 on Setting the Serviceability Requirements for Facilities Task Group E06.25.21 on Energy Monitoring Protocols Task Group E06.25.22 on Energy Performance of Whole Buildings Task Group E06.25.24 on Operation and Maintenance of Facilities Task Group E06.25.25 on Structure and Building Envelope Task Group E06.25.27 on Measuring Energy Use of Whole Buildings and Facilities Task Group E06.25.45 on Serviceability of General Purpose Office Facilities Task Group E06.25.47 on Education Facilities Task Group E06.25.05 on Behavioral Tools for Assessing Facility Design and Productivity Task Group E06.25.06 on Area Measurement of Office, Research and Institutional Facilities Task Group E06.25.08 on Area Measurement of Health Care Facilities Task Group E06.25.10 on Area Measurement of Education Facilities Task Group E06.25.26 on Multiple-Attribute Analysis (MAAP) Process for facilities Task Group E06.25.92 on Symposium on Overall Facility Performance Task Group E06.25.94 on Terminology Task Group E06.25.95 on Technical Advisory Group (TAG)
Read the entire page →

Key Terms

  • rating scales
  • office facilities
  • standards development
  • relative energy
  • rating buildings

  • energy performance
  • kent reed
  • occupant satisfaction
  • care facilities
  • maintained economically

  • behavioral measures
  • lowest cost
  • standards organization
  • permit accurate
  • space offered

  • assessing facility
  • objective rating
  • purpose office
  • overall energy
  • energy economy

  • institutional facilities
  • behavioral tools
  • international standards
  • largest voluntary
  • facility design

  • astm procedures
  • astm committee
  • building construction
  • energy monitoring
  • organization subcommittee


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.