Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
References AFTE Criteria for Identification Committee (1992). Theory of identification, range of striae comparison reports and modified glossary definitionsâAn AFTE criteria for identifica- tion committee report. AFTE Journal 24(3), 336â340. American Institute of Applied Science (1982). Firearms examination, lessons 1â3. AFTE Journal 14(2), 16â86. Argaman, U., E. Shoshani, and G. Hocherman (2001). Utilization of the IBISâ¢ in Israel. AFTE Journal 33(3), 269â272. Bachrach, B. (2002). Development of a 3D-based automated firearms evidence comparison system. Journal of Forensic Sciences 47(6), 1253â1264. Banno, A., T. Masuda, and K. Ikeuchi (2004). Three dimensional visualization and comparison of impressions on fired bullets. Forensic Science International 140, 233â240. Beauchamp, A., and D. Roberge (2005). Model of the behavior of the IBIS correlation scores in a large database of cartridge scores. Unpublished manuscript provided to the committee. Biasotti, A.A. (1959). A statistical study of the individual characteristics of fired bullets. Jour- nal of Forensic Sciences 4(1), 34â50. Biasotti, A.A. (1970). A proposal for a computer based firearms class characteristics informa- tion system. Newsletter of the Association of Firearm and Tool Mark Examiners (5), 12â16. Biasotti, A.A., and J.E. Murdock (2002). Firearms and toolmark identificationâScientific i Âssues. Pp. 205â230 (Chapter 4, Section 4-2) in D. Faigman, D.H. Kaye, M.J. Saks, and J. Sanders (Eds.), Modern Scientific Evidence: The Law and Science of Expert Testimony. St. Paul, MN: West Group Publishing Company. Blackwell, R., and E. Framan (1980). Automated firearms identification systems afids: PhaseÂ I. AFTE Journal 12(4), 11â37. Blumstein, A. (1995). Youth violence, guns, and the illicit-drug industry. Journal of Criminal Law and Criminology 86, 10â36. 281
282 BALLISTIC IMAGING Boesman, W.C., and W.J. Krouse (2001). National Integrated Ballistics Information Network (NIBIN) for Law Enforcement. (CRS Report for Congress #RL31040.) Washington, DC: Congressional Research Service. Bonfanti, M.S., and J. DeÂ Kinder (1999a). The influence of manufacturing processes on the identification of bullets and cartridge casesâA review of the literature. Science & Justice 39(1), 3â10. Bonfanti, M.S., and J. DeÂ Kinder (1999b). The influence of the use of firearms on their char- acteristic marks. AFTE Journal 31(3), 318â323. Braga, A.A. (2003). Serious youth gun offenders and the epidemic of youth violence in Boston. Journal of Quantitative Criminology 19(1), 33â54. Braga, A.A., and G.L. Pierce (2004). Linking gun crimes: The impact of ballistics imaging technology on the productivity of the Boston Police Departmentâs ballistics unit. Journal of Forensic Sciences 46(4), 701â706. Braga, A.A., D.M. Kennedy, and G.E. Tita (2002). New Approaches to the strategic prevention of gang and group-involved violence. Pp. 271â285 (Chapter 17) in C. Ronald Huff (Ed.), Gangs in America III. Thousand Oaks, CA: Sage Publications. Braga, A.A., D.M. Kennedy, E.J. Waring, and A.M. Piehl (2001). Problem-oriented policing, deterrence, and youth violence: An evaluation of Bostonâs Operation Ceasefire. Journal of Research in Crime and Delinquency 38(3), 195â225. Brundage, D.J. (1998). The identification of consecutively rifled gun barrels. AFTE Journal 30(3), 438â444. Burd, D., and P. Kirk (1942). Tool marksâFactors involved in their comparison and use as evidence. Journal of Criminal Law and Criminology 32, 679â686. Burrard, G. (1962). The Identification of Firearms and Forensic Ballistics. New York: A.S. Barnes and Company. (First American edition; originally published in United Kingdom in 1934.) Butler, A. (2005, March 10). House weighs ballistics database: State police head testifies to committee on report calling system ineffective. Baltimore Sun, p. 2B. Butterfield, F. (2002, October 24). The hunt for a sniper: TechnologyâNow, 4 states look to start tracing shells and bullets. New York Times. Available: http://query.nytimes.com/ gst/fullpage.html?res=9D06E6D8123CF937A15753C1A9649C8B63 [accessed April 2008]. Campbell, D.T., and J. Stanley (1966). Experimental and Quasi-Experimental Designs for Research. Chicago: Rand McNally. Carr, J., and T. Fadal (1997). The Miami barrel. AFTE Journal 29(2), 232â234. Carso, K.E. (2007). Symposium: Is the rule of law waning in America? Twelfth Annual C Â lifford Symposium on Tort Law and Social Policy: Comment: Amending the Illinois postconviction statute to include ballistics testing. DePaul Law Review 56(695). Castaneda, R., and D. Snyder (2005, April 2). Ballistics database yields 1st conviction: Oxon Hill man tied to murder weapon. Washington Post, p. B1. Champod, C. (2000). Identification/individualizationâOverview and meaning of ID. Pp. 1077â1084 (Volume 3) in J.A. Siegel (Ed.), Encyclopedia of Forensic Sciences. London: Academic Press. Champod, C., D. Baldwin, F. Taroni, and J. Buckleton (2003). Firearm and tool marks iden- tification: The Bayesian approach. AFTE Journal 35(3), 307â316. Chan, R. (2000). The relationship between acquisition positions of cartridge cases and dis- crepancy in correlation scores on IBIS. AFTE Journal 32(4), 337â341. Churchman, J. (1981). The reproduction of characteristics in signatures of Cooey rifles. AFTE Journal 13(1), 46â52. Collins, J.M. (1997). Manufacturing the Lorcin L380 and corresponding characteristics. AFTE Journal 29(4), 498â502.
REFERENCES 283 Cook, P.J., and A.A. Braga (2001). Comprehensive firearms tracing: Strategic and investigative uses of new data on firearms markets. Arizona Law Review 43(2), 277â309. Cook, P.J., and J.H. Laub (2002). After the epidemic: Recent trends in youth violence in the United States. Pp. 117â153 in M. Tonry (Ed.), Crime and Justice: A Review of Research. Chicago: University of Chicago Press. Cook, P.J., and J.O. Ludwig (2000). Gun Violence: The Real Costs. New York: Oxford Uni- versity Press. Cook, P.J., and J.O. Ludwig (2002). The costs of gun violence against children. The Future of Children 12(2), 87â99. Cook, T.D., and D.T. Campbell (1979). Quasi Experimentation: Design and Analytical Issues for Field Settings. Chicago: Rand McNally. Davis, J. (1958). An Introduction to Tool Marks, Firearms, and the Striagraph. Springfield, IL: Charles C. Thomas. DeÂ Kinder, J. (2002a). Ballistic fingerprinting databases. Science and Justice 42, 197â203. DeÂ Kinder, J. (2002b, December). ReviewâAB 1717 report, technical evaluation: Feasibility of a ballistics imaging database for all new handgun sales. Independent review for California Department of Justice, National Institute for Forensic Science, Belgium. DeÂ Kinder, J., and M. Bonfanti (1999). Automated comparisons of bullet striations based on 3D topography. Forensic Science International 101, 85â93. DeÂ Kinder, J., P. Prevot, M. Pirlot, and B. Nys (1998). Surface topology of bullet striations: An innovating technique. AFTE Journal 30(2), 294â299. DeÂ Kinder, J., F. Tulleners, and H. Thiebaut (2004, March 10). Reference ballistic imaging database performance. Forensic Science International 140(2â3), 207â215. Denio, D. (1999). Drugfire: The Federal Bureau of Investigation which is a participant in the National Integrated Ballistic Information Network (NIBIN). AFTE Journal 31(3), 383â385. Dillon, Jr., J.H. (2005). BulletTRAXâ¢-3D, MatchPoint Plusâ¢ and the Firearms Examiner: A Practical Application of Forensic Science, Technology and Engineering to Case Linkage in Shooting Incidents Not Previously Related by Investigative Personnel. Independent report commissioned by Forensic Technology WAI, Inc. Ethridge, M.W. (1998). The ATF National Firearm Examiner AcademyâA new part of ATFâs integrated firearm enforcement strategy. AFTE Journal 30(4), 703â704. Evans, J.P.O., C.L. Smith, and M. Robinson (2004). Validation of the linescan imaging technique for imaging cylindrical forensic ballistics specimens. AFTE Journal 36(4), 275â280. Fadal, Jr., T.G. (1995). One striker leaves two different firing pin impressions. AFTE Journal 27(1), 38â39. Fadal, Jr., T.G., and A. NuÃ±ez (2003). The Miami barrel saga continues. AFTE Journal 35(3), 290â297. Fadal, Jr., T.G., and A. NuÃ±ez (2006). Glockâs new âEBISâ barrel: The finale to the Miami barrel story. AFTE Journal 38(2), 96â100. Flater, J.A. (2002). Manufacturing marks on Winchester USA brand 9mm Luger primers. AFTE Journal 34(3), 315. Forensic Technology WAI, Inc. (2001). IBIS User Guide, Version 3.3. MontrÃ©al: Forensic Technology WAI, Inc. Forensic Technology WAI, Inc. (2002a, March). Comments of Forensic Technology, Inc., on the technical evaluation: Feasibility of a ballistics imaging database for all new handgun sales. Response to California Department of Justice evaluation. Forensic Technology WAI, Inc. (2002b). IBIS Version 3.4 Training Course: Student Book. MontrÃ©al: Forensic Technology WAI, Inc.
284 BALLISTIC IMAGING Frost, G.E. (1990). Ammunition Making: An Insiderâs Story. Washington, DC: National Rifle Association of America. Gardner, G.Y. (1979). Computer identification of bullets. AFTE Journal 11(2), 26â33. George, W. (2004a). A validation of the Brasscatcherâ¢ portion of the NIBIN/IBISâ¢ system. AFTE Journal 36(4), 286â288. George, W. (2004b). The validation of the Brasscatcherâ¢ portion of the NIBIN/IBISâ¢ system part two: âFingerprinting firearmsâ reality or fantasy. AFTE Journal 36(4), 289â294. Giverts, P., U. Argaman, E. Shoshani, and O. Aharon (2002). An average phase scoring for bullets, in the IBISâ¢ correlation results. AFTE Journal 34(2), 199â202. Glass, S., and W. Gibson (1997). Firearms factory tours. AFTE Journal 29(4), 487â493. Goddard, C.H. (1980). A history of firearms identification. AFTE Journal 12(4), 38â57. [ Â Reprinted from Chicago Police Journal, 1936.] Goddard, C.H. (1999). History of firearms identification to 1930 [reprint of 1953 address]. AFTE Journal 31(3), 225â241. Goebel, R., K. Gross, H. Katterwe, and W. Kammrath (1980). The comparison scanning elec- tron microscope: First experiments in forensic application. Scanning 3, 193â201. GrooÃ, K. (1995). The âhammer-murderer.â AFTE Journal 27(1), 27â30. Grove, C., C. Judd, and R. Horn (1972). SEMâA new technique for firearms examination. Newsletter of the Association of Firearm and Tool Mark Examiners (18), 19â21. Grzybowski, R.A., and J.E. Murdock (1998). Firearm and toolmark identificationâMeeting the Daubert challenge. AFTE Journal 30(1), 3â14. Grzybowski, R., J. Miller, B. Moran, J. Murdock, R. Nichols, and R. Thompson (2003). F Â irearm/toolmark identification: Passing the reliability test under federal and state evi- dentiary standards. AFTE Journal 35(2), 209â241. Haag, L.C. (2004). Ballistic ID tagging. Presentation to the Committee on the Feasibility, A Â ccuracy, and Technical Capability of a National Ballistics Database, December. Hall, E.E. (1983). Bullet markings from consecutively rifled Shilen DGA barrels. AFTE Journal 15(1), 33â53. Hamby, J.E. (1974). Identification of projectiles. AFTE Journal 6(5â6), 22. Hamby, J.E., and J.W. Thorpe (1999). The history of firearm and toolmark identification. AFTE Journal 31(3), 266â284. Hatcher, J.S. (1935). Textbook of Firearms Investigation, Identification and Evidence (First Edition). Marines, NC: Small-Arms Technical Publishing Company. Hayes, C.S., M. Basoa, and R. Freese (2004). Reduction of characteristic breechface marks due to primer sealants. AFTE Journal 36(2), 139â146. Heard, B.J. (1997). Handbook of Firearms and Ballistics: Examining and Interpreting Forensic Evidence. Chichester, England: John Wiley and Sons. Hess, P.A., and B. Moran (2006). The removal of superficial rust/corrosion from the working surfaces of firearms for the purpose of revealing their potentially identifiable signature and an application of this technique in a firearms identification. AFTE Journal 38(2), 112â132. Insurance Information Institute (2006). Hot Topics and Issue Updates: Auto Theft. Available: http://www.iii.org/media/hottopics/insurance/test4/ [accessed February 2008]. Kennedy, D.M., A.M. Piehl, and A.A. Braga (1996). Youth violence in Boston: Gun markets, serious youth offenders, and a use-reduction strategy. Law and Contemporary Problems 59(1):147â196. Kennington, R.H. (1992). The Matrix, 9mm Parabellum: An Empirical Study of Type Deter- mination. Miami: R.H. Kennington. Kennington, R.H. (1995). 9mm arcology: Arch contenders. AFTE Journal 27(3), 213â219. Kirk, P. (1963). The ontogeny of criminalistics. Journal of Criminal Law, Criminology, and Police Science 54, 235â238.
REFERENCES 285 Konior, T. (2006). Identification based on breech face markings on the head of a discharged cartridge case. AFTE Journal 38(3), 242â244. Kopel, D., and H. Burnett (2003). Ballistics Imaging: Not Ready for Prime Time. (Policy Backgrounder No. 160.) Dallas, TX: National Center for Policy Analysis. Kreiser, J. (1995). Primer âflowbackâ is not always due to high pressure. AFTE Journal 27(1), 1â4. Krivosta, G.G. (2006). NanoTagâ¢ markings from another perspective. AFTE Journal 38(1), 41â47. Lardizabal, P.P. (1995). Cartridge case study of the Heckler & Koch USP. AFTE Journal 27(1), 49â51. Larrison, R.M. (2006). Degradation of fired bullets and cartridge cases in different environ- mental mediums. AFTE Journal 38(3), 223â230. Lindgren, S.A., and M.W. Zawitz (2001). Linking Uniform Crime Reporting Data to Other Datasets. NCJ185233. Washington, DC: U.S. Department of Justice. Lockyer, B. (2003, January). Feasibility of a California Ballistics Identification System: Assem- bly Bill 1717 (Hertzberg) (Stats. 2000, ch. 271)âReport to the Legislature. Sacramento: California Department of Justice. Lomoro, V. (1974). Class characteristics of 32 SWL, F.I.E. Titanic revolvers. AFTE Journal 6(2), 18â21. Ludwig, J.O., and P.J. Cook (2001). The benefits of reducing gun violence: Evidence from contingent-valuation survey data. Journal of Risk and Uncertainty 22(3), 207â226. Lutz, M.C. (1970, August). Consecutive revolver barrels. Newsletter of the Association of Firearm and Tool Mark Examiners (9), 24â28. Main, F. (2005, May 31). Cops: Bullet database cracks â95 murder. Chicago Sun Times. Maruoka, R.K. (1994a). Guilty before the crime? The potential for a possible misidentification or elimination. AFTE Journal 26(3), 206â213. Maruoka, R.K. (1994b). Turning unknowns into knowns: Linking cartridge cases to the fire- arms and suspects to crime scenes. AFTE Journal 26(3), 214â215. Maruoka, R.K., and P. Ball (1995). Guilty before the crime II. AFTE Journal 27(1):20â21. Maryland State Police, Forensic Sciences Division (2003, September). Maryland-IBIS (Inte- grated Ballistics Identification System). Pikesville, MD: Maryland State Police. Maryland State Police, Forensic Sciences Division (2004, September). MD-IBIS Progress Â eport #2. Pikesville, MD: Maryland State Police. R Masson, J.J. (1997). Confidence level variations in firearms identification through computer- ized technology. AFTE Journal 29(1), 42â44. Matty, W. (1985). A comparison of three individual barrels produced from one button rifled barrel blank. AFTE Journal 17(3), 64â69. Matty, W. (1987). Primer composition and gunshot residue. AFTE Journal 19(1), 8â13. Matty, W. (1999). Lorcin L9MM and L380 pistol breechface toolmark patterns. AFTE Journal 31(2), 134â137. Matty, W., and T. Johnson (1984). A comparison of manufacturing marks on Smith & Wesson firing pins. AFTE Journal 16(3), 51â56. McCarthy, D.M. (2004). The NYPD ballistic image database. Presentation to the Committee on the Feasibility, Accuracy, and Technical Capability of a National Ballistics Database, December. McLean, D. (1999). Examiners make explosive gains in the ballistic labs; productivity rockets to levels unheard of before. AFTE Journal 31(3), 386â392. McLean, M. (2004). Initial results: Large database study and new firing pin algorithm. Pre- sentation to the Committee on the Feasibility, Accuracy, and Technical Capability of a National Ballistics Database, May.
286 BALLISTIC IMAGING Michel, L., and D. Herbeck (2001). American Terrorist: Timothy McVeigh and the Oklahoma City Bombing. New York: ReganBooks. Miller, J. (2000). Criteria for identification of toolmarks part II: Single land impression com- parisons. AFTE Journal 32(2), 116â131. Miller, J. (2001). An examination of the application of the conservative criteria for identifica- tion of striated toolmarks using bullets fired from ten consecutively rifled barrels. AFTE Journal 33(2), 125â132. Miller, J. (2004). Criteria for identification of toolmarks part III: Supporting the conclusion. AFTE Journal 36(1), 7â38. Miller, J., and M. McLean (1998). Criteria for identification of toolmarks. AFTE Journal 30(1), 15â61. Molnar, S. (1970, December). What is a firearms examinerâSome provocative thoughts. AssoÂ ciation of Firearm and Tool Mark Examiners Newsletter (11), 36â39. Molnar, S. (1977). Notes on breech face marks and fouling. AFTE Journal 9(1), 21. Moran, B. (2000). Firearms examiner expert witness testimony: The forensic firearms iden- tification process including criteria for identification and distance determination. AFTE Journal 32(3), 231â251. Moran, B. (2002). A report on the AFTE theory of identification and range of conclusions for tool mark identification and resulting approaches to casework. AFTE Journal 34(2), 227â235. Moran, B. (2003). Photo documentation of toolmark identificationsâAn argument in support. AFTE Journal 35(2), 174â189. Moran, B., and J. Murdock (2002). Joseph Ramirez vs. State of Florida [Supreme Court deci- sion, December 20.] AFTE Journal 34(2), 215. Murdock, J.E. (1981). A general discussion of gun barrel individuality and an empirical assessÂ ment of the individuality of consecutively button rifled .22 caliber rifle barrels. AFTE Journal 13(3), 84â95. Murray, K. (2004). Toolmark identifications on unfired primers: More Fiocchi manufacturing marks. AFTE Journal 36(4), 313â314. Nagin, D. (1998). Deterrence and incapacitation. Pp. 345â368 in M. Tonry (Ed.), Oxford Handbook of Crime and Punishment. New York: Oxford University Press. National Research Council (1996). The Evaluation of Forensic DNA Evidence. Committee on DNA Forensic Science: An Update. Commission on DNA Forensic Science: An Update. Washington, DC: National Academy Press. National Research Council (2005). Firearms and Violence: A Critical Review. Committee to Improve Research Information and Data on Firearms. C.F. Wellford, J.V. Pepper, and C.V. Petrie (Eds.). Committee on Law and Justice, Division of Behavioral and Social S Â ciences and Education. Washington, DC: The National Academies Press. Nennstiel, R., and J. Rahm (2006a). An experience report regarding the performance of the IBISâ¢ correlator. Journal of Forensic Sciences 51(1), 24â30. Nennstiel, R., and J. Rahm (2006b). A parameter study regarding the IBISâ¢ correlator. Jour- nal of Forensic Sciences 51(1), 18â23. Newton, J. (2006, August 10). Mayor, police chief endorse bullet-identification measure. Los Angeles Times, p. B5. NIBIN Branch (2003, May). NIBIN News: Guidance for Hit Reporting. Available: http://www. nibin.gov/documents/0503hitdefinition.pdf [accessed February 2008]. NIBIN Program (2001). The Missing Link: Ballistics Technology That Helps Solve Crimes. (Publication ATF P.3315.1.) Washington, DC: U.S. Bureau of Alcohol, Tobacco, Fire- arms, and Explosives. Nichols, R.G. (1995). Glock versus Smith & Wesson model SW40F: Comparison of markings on fired cartridge cases. AFTE Journal 27(2), 133â139.
REFERENCES 287 Nichols, R.G. (1997). Firearm and toolmark identification criteria: A review of the literature. Journal of Forensic Sciences 42(3), 466â474. Nichols, R.G. (2003). Consecutive matching striations (CMS): Its definition, study and a Â pplication in the discipline of firearms and tool mark identification. AFTE Journal 35(3), 298â306. Nichols, R.G. (2004). Firearm and tool mark identification: The scientific reliability and valid- ity of the AFTE theory of identification discussed within the framework of a study of ten consecutively manufactured extractors. AFTE Journal 36(1), 67â88. Nichols, R.G. (2005). The scientific foundations of firearms and tool mark identificationâA response to recent challenges. Available: http://www.nibin.gov/documents/120299mou. htm [accessed March 2008]. Office of National Drug Control Policy (1994, November). Benchmark Evaluation Studies of the BULLETPROOF and DRUGFIRE Ballistic Imaging Systems: A Technical Evalua- tion with Recommendations for Action. (Counterdrug Technology Assessment Center). Washington, DC: Executive Office of the President. Ogihara, Y., M. Kubota, M. Sanada, K. Fukuda, T. Uchiyama, and J. Hamby (1989). Compar- ison of 5000 consecutively fired bullets and cartridge cases from a 45 caliber M1911A1 pistol. AFTE Journal 21(2), 331â343. Parachini, J.V. (2000). The World Trade Center bombers (1993). Chapter 11 in J.B. Tucker (Ed.), Toxic Terror: Assessing Terrorist Use of Chemical and Biological Weapons. Cam- bridge, MA: MIT Press. Phillips, P.J., H. Moon, S.A. Rizvi, and P.J. Rauss (2000). The FERET evaluation methodology for face-recognition algorithms. IEEE Transactions on Pattern Analysis and Machine Intelligence 22, 1090â1104. Rector, M. (2002). Effects of ultrasonic cleaning of bullets on IBIS correlation scores: A pre- liminary report. AFTE Journal 34(2), 165â168. Reitz, J.E. (1975). Unfired cartridge phenomenon. AFTE Journal 7(2), 103â104. Rinker, R.A. (2004). Understanding Firearm Ballistics (Fifth Edition). Clarksville, IN: ÂMulberry House Publishing. Roberge, D., and A. Beauchamp (2006). The use of BulletTrax-3D in a study of consecutively manufactured barrels. AFTE Journal 38(2), 166â172. Robinson, M.K. (1996). Another manufactured toolmark. AFTE Journal 28(3), 164â165. Rosenberry, J.L. (2003). Firearm/toolmark examination and the Daubert criteria. AFTE Journal 35(1), 38â48. Rowe, W.F. (1991). Statistics in forensic ballistics. Pp. 168â177 in C.G.G. Aitken and D.A. Stoney (Eds.), The Use of Statistics in Forensic Science. New York: Ellis Horwood Ltd. Saks, M.J., and J.J. Kohler (2005, August 5). The coming paradigm shift in forensic identifica- tion science. Science 309(5736), 892â895. SÃ¡nchez, G.B. (2006, September 11). Tracking crime gun by tracking ammo: One bill to do that failed in legislature. Monterey County Herald, p. A1. Schecter, B., and P. Giverts (2005). An additional method of using the IBIS algorithm for comparison of Glock type cartridge cases. AFTE Journal 37(1), 27â31. Schecter, L., L. Nedivi, and G. Hocherman (1996). Changing the individual characteristics of the Sig-Sauer pistol. AFTE Journal 28(2), 97â103. Schwartz, A. (2005). A systemic challenge to the reliability and admissibility of firearms and toolmark identification. Columbia Science and Technology Law Review VI, 1â42. Semwogerere, D., and E.R. Weeks (2005). Confocal microscopy. In G. Wnek and G.L. Bowlin (Eds.), Encyclopedia of Biomaterials and Biomedical Engineering. New York: Taylor & Francis. Silverwater, H., and A. Koffman (2000). IBISâ¢ correlation resultsâImprovements. AFTE Journal 32(1), 32â39.
288 BALLISTIC IMAGING Smith, E.D. (2004). Cartridge case and bullet comparison validation study with firearms sub- mitted in casework. AFTE Journal 36(4), 130â135. Smith, L.L. (1971, February). Jokers in the field of firearms examination. Association of Fire- arm and Tool Mark Examiners Newsletter (12), 12â22. Stoney, D.A. (1991). What made us ever think we could individualize using statistics? Journal of the Forensic Science Society 31(2), 197â199. Sweeney, J.P. (2007, September 11). Handgun stamping bill sent to governor. Copley News Ser- vice. Available: http://www.signonsandiego.com/news/state/20070911-9999-1n11gunstampÂ. html [accessed February 2008]. Tam, C.K. (2001). Overview of manufacturing marks on center fire cartridges. AFTE Journal 33(2), 112â115. Tew, J.D. (2003). Incorrect manufacturer supplied test fire cartridge cases. AFTE Journal 35(2):195â196. Thompson, E. (1996). False breech face IDâs. AFTE Journal 28(2), 25â26. Thompson, E. (2006). Editorial: Two-dimensional versus three-dimensional characteristics. AFTE Journal 38(1), 10â13. Thompson, R.M. (1998b, November). Automated firearms evidence comparison using the Integrated Ballistic Identification System (IBIS). Pp. 94â103 in Part of the SPIE Confer- ence on Investigation and Forensic Technologies. Boston, MA: International Society for Optical Engineering. Thompson, R.M., M. Desrosiers, and S. Hester (1996). Computerized image analysis for firearms identification: The Integrated Ballistic Identification System (IBIS) Brasscatcher performance study. AFTE Journal 28(3), 194â203. Thompson, R.M., J. Miller, M.G. Ols, and J.C. Budden (2002, May). Ballistic imaging and comparison of crime gun evidence by the Bureau of Alcohol, Tobacco, and Firearms. Response to California Department of Justice evaluation, Bureau of Alcohol, Tobacco, and Firearms. Thornton, J.I. (1978). Some historical notes on the comparison microscope. AFTE Journal 10(1), 7â10. Thornton, J.I., and J.L. Peterson (2002). The general assumptions and rationale of forensic identification. Pp. 1â49 in D.L. Faigman, D.H. Kaye, M.J. Saks, and J. Sanders (Eds.), Science in the Law: Forensic Science Issues. St. Paul, MN: West Group Publishing Company. Thurman, R. (2006, July). A business in transaction: Industry embarks on a period of growth. Shooting Industry, 30â43. Tontarski, R.E., and R.M. Thompson (1998). Automated firearms evidence comparison: A forensic tool for firearms identificationâAn update. Journal of Forensic Sciences 43(3), 641â647. Tsai, J. (2006, September 25). Etched bullets interest law enforcement; lasering may help solve gun crimes. Bergen County Record, p. A1. Tulleners, F.A. (2001). Technical evaluation: Feasibility of a ballistics imaging database for all new handgun sales. (Attachment to Lockyer ); Evaluation for California Depart- ment of Justice. Uchiyama, T. (1986). Similarity among breech face marks fired from guns with close serial numbers. AFTE Journal 18(3), 15â52. Uchiyama, T., N. Igarashi, and M. Nagai (1988). The frequency of occurrence of individual characteristics of firearms on fired bullets and cartridge cases. AFTE Journal 20(4), 376â390. U.S. Bureau of Alcohol, Tobacco, and Firearms (2000). Commerce in Firearms in the United States. Washington, DC: U.S. Department of the Treasury.
REFERENCES 289 U.S. Department of Justice, Office of the Inspector General (2005, June). The Bureau of Alcohol, Tobacco, Firearms and Explosivesâ National Integrated Ballistic Information Network Program. (Audit Division, Audit Report #05-30.) Washington, DC: U.S. DepartÂ ment of Justice. Vinci, F., R. Falamingo, C.P. Campobasso, and J.A. Bailey (2005). Morphological study of class and individual characteristics produced by firing 2500 cartridges in a .45 caliber semi-automatic pistol. AFTE Journal 37(4), 368â373. Vorburger, T., J.H. Yen, B. Bachrach,T.B. Renegar, J.J. Filliben, L. Ma, H.-G. Rhee, A. Zheng, J.-F. Song, M. Riley, C.D. Foreman, and S.M. Ballou (2007). Surface Topography Analy- sis for a Feasibility Assessment of a National Ballistics Imaging Database. (NISTIR 7362; revision December 26, 2006.) Report prepared for the Committee to Assess the Feasibil- ity, Accuracy, and Technical Capability of a National Ballistics Database under National Institute of Justice Grant 2003-IJ-R-029 with the NIST Office of Law Enforcement Standards. Gaithersburg, MD: National Institute of Standards and Technology. Wellford, C., and J. Cronin (1999, October). An Analysis of Variables Affecting the Clear- ance of Homicides: A Multistate Study. Washington, DC: Justice Research and Statistics Association. Wellford, C., and J. Cronin (2000). Clearing up homicide clearance rates. NIJ Journal (April), 3â7. Wilson, C., R.A. Hicklin, H. Korves, B. Ulery, M. Zoepfl, M. Bone, P. Grother, R. Micheals, S. Otto, and C. Watson (2004). Fingerprint Vendor Technology Evaluation 2003: Sum- mary of Results. (IR 7123.) Gaithersburg, MD: National Institute of Standards and Technology. Yamamura, K. (2005a, August 25). Bullet serial number proposal is tabled. Sacramento Bee, p. A5. Yamamura, K. (2005b, May 1). Marking bullets would help cops, supporters say. Sacramento Bee, p. A3. Yborra, L.F., and J.R. McClary (2004). Toolmarks on Remington 9mm luger caliber ammuni- tion. AFTE Journal 36(4), 308â310. Zeosky, G.F. (2005, December). Letter to staff of the Committee on the Feasibility, Accuracy, and Technical Capability of a National Ballistics Database. Zographos, A., M. Robinson, J. Evans, and C.L. Smith (1997). Ballistics identification using line-scan imaging techniques. Pp. 82â87 in Proceedings of the Institute of Electrical and Electronics Engineers 31st Annual 1997 International Carnahan Conference on Security Technology.