National Academies Press: OpenBook

Design of Concrete Structures Using High-Strength Steel Reinforcement (2011)

Chapter: Abbreviations used without definitions in TRB publications

« Previous: Appendices
Page 73
Suggested Citation:"Abbreviations used without definitions in TRB publications." National Academies of Sciences, Engineering, and Medicine. 2011. Design of Concrete Structures Using High-Strength Steel Reinforcement. Washington, DC: The National Academies Press. doi: 10.17226/14496.
×
Page 73

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Abbreviations and acronyms used without definitions in TRB publications: AAAE American Association of Airport Executives AASHO American Association of State Highway Officials AASHTO American Association of State Highway and Transportation Officials ACI–NA Airports Council International–North America ACRP Airport Cooperative Research Program ADA Americans with Disabilities Act APTA American Public Transportation Association ASCE American Society of Civil Engineers ASME American Society of Mechanical Engineers ASTM American Society for Testing and Materials ATA Air Transport Association ATA American Trucking Associations CTAA Community Transportation Association of America CTBSSP Commercial Truck and Bus Safety Synthesis Program DHS Department of Homeland Security DOE Department of Energy EPA Environmental Protection Agency FAA Federal Aviation Administration FHWA Federal Highway Administration FMCSA Federal Motor Carrier Safety Administration FRA Federal Railroad Administration FTA Federal Transit Administration HMCRP Hazardous Materials Cooperative Research Program IEEE Institute of Electrical and Electronics Engineers ISTEA Intermodal Surface Transportation Efficiency Act of 1991 ITE Institute of Transportation Engineers NASA National Aeronautics and Space Administration NASAO National Association of State Aviation Officials NCFRP National Cooperative Freight Research Program NCHRP National Cooperative Highway Research Program NHTSA National Highway Traffic Safety Administration NTSB National Transportation Safety Board PHMSA Pipeline and Hazardous Materials Safety Administration RITA Research and Innovative Technology Administration SAE Society of Automotive Engineers SAFETEA-LU Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (2005) TCRP Transit Cooperative Research Program TEA-21 Transportation Equity Act for the 21st Century (1998) TRB Transportation Research Board TSA Transportation Security Administration U.S.DOT United States Department of Transportation

Design of Concrete Structures Using High-Strength Steel Reinforcement Get This Book
×
 Design of Concrete Structures Using High-Strength Steel Reinforcement
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

TRB’s National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaulates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau.

The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi.

The Appendixes to NCHRP Report 679 were published online and include the following:

APPENDIX A—Material Properties

APPENDIX B—Flexural Resistance of Members with Reinforcing Bars Lacking Well- Defined Yield Plateau

APPENDIX C—Strain Limits for Tension-Controlled/Compression-Controlled and Strains to Allow Negative Moment Redistribution

APPENDIX D—Flexure Beam Tests

APPENDIX E—Fatigue of High-Strength Reinforcing Steel

APPENDIX F—Shear Beam Tests

APPENDIX G—Analytical Studies of Columns

APPENDIX H—Beam Splice Tests

APPENDIX I—Crack Control

APPENDIX J—Survey Results

APPENDIX K—Design Examples

APPENDIX L—Proposed Changes to Section 5 of the AASHTO LRFD Specification

APPENDIX M—2010 AASHTO Bridge Committee Agenda Item

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!