Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
C-1 APPENDIX C EVALUATION TEST DATA TABLE C-1 Modulus and phase angle data and values for associated quality indices Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC AAT 95MM 25.0 0.0 10.00 5001 28.9 0.0 2.8 -343.1 6.9 4.8 0.5 IPC AAT 95MM 25.0 0.0 1.00 2258 33.5 0.1 0.8 -245.2 3.6 5.4 0.8 IPC AAT 95MM 25.0 0.0 0.10 881 32.7 0.0 2.2 -82.4 3.1 4.3 0.7 IPC AAT 95MM 25.0 0.0 10.00 5301 27.7 0.0 2.6 -278.6 6.3 18.8 0.7 IPC AAT 95MM 25.0 0.0 1.00 2451 31.7 0.0 0.6 -173.5 3.2 18.7 1.2 IPC AAT 95MM 25.0 0.0 0.10 986 31.2 -0.1 2.0 -44.7 3.3 18.2 1.4 IPC AAT 95MM 25.0 0.0 10.00 4663 29.5 0.1 3.5 -354.4 6.9 2.3 0.1 IPC AAT 95MM 25.0 0.0 1.00 2091 34.0 0.1 0.7 -272.8 4.1 2.9 0.4 IPC AAT 95MM 25.0 0.0 0.10 805 33.2 -0.4 2.3 -104.9 3.5 6.1 0.7 IPC AAT 95MM 25.0 0.0 10.00 5289 28.7 0.0 2.7 -331.2 6.7 3.6 0.4 IPC AAT 95MM 25.0 0.0 1.00 2411 33.3 -0.1 0.7 -245.8 3.7 3.4 0.7 IPC AAT 95MM 25.0 0.0 0.10 972 32.7 0.1 1.9 -98.9 3.2 4.3 0.3 IPC AAT 95MM 25.0 0.0 10.00 4578 28.2 0.1 2.9 -268.2 6.6 11.6 0.5 IPC AAT 95MM 25.0 0.0 1.00 2048 32.7 0.3 0.8 -163.2 3.0 12.7 0.1 IPC AAT 95MM 25.0 0.0 0.10 769 33.3 0.2 2.3 -18.0 3.1 12.6 0.8 IPC AAT 95MM 25.0 0.0 10.00 5377 27.4 -0.1 2.7 -316.6 6.5 3.4 0.5 IPC AAT 95MM 25.0 0.0 1.00 2552 32.5 0.1 0.7 -277.5 3.9 1.7 0.8 IPC AAT 95MM 25.0 0.0 0.10 1049 32.5 0.2 1.7 -140.9 2.9 0.3 1.0 IPC AAT 95MM 25.0 0.0 10.00 5101 27.9 0.1 2.9 -271.9 6.5 2.5 0.2 IPC AAT 95MM 25.0 0.0 1.00 2303 32.7 0.4 0.8 -172.7 3.2 2.4 0.2 IPC AAT 95MM 25.0 0.0 0.10 882 32.9 -0.1 2.1 -60.1 2.9 1.8 0.1 IPC AAT 95MM 25.0 0.0 10.00 5397 28.3 0.0 2.6 -343.4 6.7 5.5 0.2 IPC AAT 95MM 25.0 0.0 1.00 2475 33.5 0.3 0.7 -296.7 4.1 2.4 0.3 IPC AAT 95MM 25.0 0.0 0.10 981 33.6 0.4 1.8 -134.9 3.0 1.5 0.1 IPC AAT 95MM 45.0 0.0 10.00 888 37.4 -0.6 5.2 -271.3 8.2 3.0 1.2 IPC AAT 95MM 45.0 0.0 1.00 282 33.4 1.1 2.6 14.5 4.8 2.6 1.3 IPC AAT 95MM 45.0 0.0 0.10 131 26.1 0.9 9.7 95.1 5.0 5.6 0.9 IPC AAT 95MM 45.0 0.0 10.00 965 36.6 -0.4 5.4 -193.7 7.1 16.8 2.1 IPC AAT 95MM 45.0 0.0 1.00 341 32.5 0.0 3.2 17.9 5.9 16.7 2.9 IPC AAT 95MM 45.0 0.0 0.10 149 26.5 1.6 7.8 248.6 5.9 21.2 3.0 IPC AAT 95MM 45.0 0.0 10.00 843 39.8 -0.3 5.7 -361.4 9.1 8.6 0.1 IPC AAT 95MM 45.0 0.0 1.00 274 35.0 -2.1 3.8 10.1 6.3 6.5 0.9
C-2 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC AAT 95MM 45.0 0.0 0.10 109 29.2 1.7 11.0 244.0 8.4 6.6 1.4
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-3 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC AAT 95MM 45.0 0.0 10.00 952 36.7 0.0 5.1 -245.2 7.3 3.2 0.5 IPC AAT 95MM 45.0 0.0 1.00 334 32.7 -0.1 2.7 -19.6 6.3 1.1 1.1 IPC AAT 95MM 45.0 0.0 0.10 129 27.8 0.3 8.9 71.0 5.2 3.7 0.9 IPC AAT 95MM 45.0 0.0 10.00 685 38.3 -0.8 7.8 -213.1 8.3 14.6 1.4 IPC AAT 95MM 45.0 0.0 1.00 225 34.1 0.7 3.8 26.0 5.5 12.3 1.8 IPC AAT 95MM 45.0 0.0 0.10 89 28.4 -4.6 9.0 338.4 7.0 13.0 0.9 IPC AAT 95MM 45.0 0.0 10.00 891 37.1 0.1 7.2 -258.5 8.7 7.9 0.7 IPC AAT 95MM 45.0 0.0 1.00 314 32.5 1.3 3.4 -14.2 6.0 10.4 0.9 IPC AAT 95MM 45.0 0.0 0.10 125 27.3 4.2 7.3 123.8 5.8 11.4 0.7 IPC AAT 95MM 45.0 0.0 10.00 874 37.8 -0.5 6.1 -231.9 7.4 8.2 0.7 IPC AAT 95MM 45.0 0.0 1.00 292 34.5 0.6 3.1 -8.1 4.9 10.0 1.0 IPC AAT 95MM 45.0 0.0 0.10 117 28.1 -1.8 9.9 126.2 5.2 11.5 1.0 IPC AAT 95MM 45.0 0.0 10.00 852 37.5 -0.3 6.9 -232.6 7.7 12.3 0.8 IPC AAT 95MM 45.0 0.0 1.00 297 32.9 -2.2 3.5 -0.9 6.0 11.6 1.0 IPC AAT 95MM 45.0 0.0 0.10 118 27.8 2.8 9.0 217.0 6.2 10.7 1.1 IPC AAT 95MM 45.0 138.0 10.00 1369 27.6 0.3 4.3 -83.4 4.5 6.0 0.8 IPC AAT 95MM 45.0 138.0 1.00 877 19.3 0.1 1.1 -38.1 2.5 5.1 0.7 IPC AAT 95MM 45.0 138.0 0.10 782 12.5 0.2 2.1 -58.1 2.8 5.1 1.1 IPC AAT 95MM 45.0 138.0 10.00 1586 30.2 0.2 3.5 -91.9 4.6 13.6 2.4 IPC AAT 95MM 45.0 138.0 1.00 1025 22.7 -0.1 1.1 -25.4 3.8 15.0 2.4 IPC AAT 95MM 45.0 138.0 0.10 825 16.3 -0.7 2.8 -14.3 4.7 14.0 0.6 IPC AAT 95MM 45.0 138.0 10.00 1544 25.6 -0.1 3.6 -55.8 3.9 12.7 0.1 IPC AAT 95MM 45.0 138.0 1.00 996 17.7 -0.2 1.2 -24.4 2.3 11.5 0.3 IPC AAT 95MM 45.0 138.0 0.10 817 10.8 0.3 2.2 -28.6 2.5 10.6 0.4 IPC AAT 95MM 45.0 138.0 10.00 1450 27.4 0.2 4.0 -77.5 4.4 5.4 0.3 IPC AAT 95MM 45.0 138.0 1.00 892 20.0 -0.7 1.3 -16.1 2.6 5.9 0.3 IPC AAT 95MM 45.0 138.0 0.10 705 13.0 0.4 2.1 -28.9 4.7 12.5 0.5 IPC AAT 95MM 45.0 138.0 10.00 1315 27.0 0.1 3.3 -100.6 3.9 9.9 0.7 IPC AAT 95MM 45.0 138.0 1.00 843 19.2 0.4 1.4 -42.1 2.8 11.2 0.6 IPC AAT 95MM 45.0 138.0 0.10 780 12.9 -1.6 3.5 -92.9 4.6 3.1 1.1 IPC AAT 95MM 45.0 138.0 10.00 1693 25.0 0.0 3.2 -72.5 3.5 4.4 0.7 IPC AAT 95MM 45.0 138.0 1.00 1091 17.8 -0.3 1.1 -13.7 2.3 5.5 0.7 IPC AAT 95MM 45.0 138.0 0.10 861 11.0 -0.1 2.6 -16.3 2.8 5.7 0.5 IPC AAT 95MM 45.0 138.0 10.00 1377 28.1 0.2 3.3 -95.0 4.2 16.8 1.4 IPC AAT 95MM 45.0 138.0 1.00 879 19.8 -0.1 1.1 -30.7 2.2 17.3 0.9 IPC AAT 95MM 45.0 138.0 0.10 765 12.6 -0.1 3.1 -59.8 4.1 15.7 0.2
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-4 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC AAT 95MM 45.0 138.0 10.00 1412 28.0 0.3 4.0 -89.0 4.5 8.3 1.0 IPC AAT 95MM 45.0 138.0 1.00 888 20.0 -0.3 1.3 -29.2 2.5 8.2 0.1 IPC AAT 95MM 45.0 138.0 0.10 665 13.3 0.3 3.3 2.4 3.5 6.4 0.4 IPC AAT 19MM 25.0 0.0 10.00 7307 25.2 -0.1 2.1 -273.3 5.6 22.6 0.4 IPC AAT 19MM 25.0 0.0 1.00 3766 30.4 0.1 0.6 -266.7 3.8 21.4 0.8 IPC AAT 19MM 25.0 0.0 0.10 1693 32.0 -0.4 1.4 -180.0 3.2 19.5 1.2 IPC AAT 19MM 25.0 0.0 10.00 7728 24.3 0.0 2.2 -195.7 5.6 14.0 0.8 IPC AAT 19MM 25.0 0.0 1.00 3891 29.1 0.2 0.5 -115.1 2.9 15.8 0.8 IPC AAT 19MM 25.0 0.0 0.10 1648 30.6 -0.1 1.2 -47.5 3.4 17.9 0.7 IPC AAT 19MM 25.0 0.0 10.00 6951 24.6 -0.1 2.1 -261.9 5.5 24.0 0.6 IPC AAT 19MM 25.0 0.0 1.00 3616 29.9 0.2 0.6 -250.5 4.0 24.1 0.1 IPC AAT 19MM 25.0 0.0 0.10 1611 31.6 -0.3 0.9 -145.0 3.4 22.8 0.6 IPC AAT 19MM 25.0 0.0 10.00 7252 25.5 0.0 2.2 -276.8 5.8 15.9 0.3 IPC AAT 19MM 25.0 0.0 1.00 3670 30.6 0.1 0.5 -235.5 4.0 13.3 0.3 IPC AAT 19MM 25.0 0.0 0.10 1582 32.1 0.4 0.6 -103.3 2.8 14.5 0.9 IPC AAT 19MM 25.0 0.0 10.00 7801 24.6 0.0 2.2 -272.8 5.6 5.3 0.4 IPC AAT 19MM 25.0 0.0 1.00 4025 30.5 0.1 0.6 -279.6 4.0 5.2 0.4 IPC AAT 19MM 25.0 0.0 0.10 1771 32.3 -0.4 1.1 -186.5 2.9 5.7 0.4 IPC AAT 19MM 25.0 0.0 10.00 8294 24.3 0.1 2.1 -266.4 5.5 4.1 0.5 IPC AAT 19MM 25.0 0.0 1.00 4303 30.1 0.1 0.6 -265.8 3.7 3.1 0.7 IPC AAT 19MM 25.0 0.0 0.10 1919 32.4 0.1 1.2 -177.5 2.9 2.4 1.0 IPC AAT 19MM 25.0 0.0 10.00 6999 24.8 0.1 2.9 -254.9 5.5 9.7 0.1 IPC AAT 19MM 25.0 0.0 1.00 3605 29.9 0.1 0.6 -252.4 3.7 9.1 0.0 IPC AAT 19MM 25.0 0.0 0.10 1605 31.6 0.2 1.3 -171.8 2.8 9.5 0.3 IPC AAT 19MM 25.0 0.0 10.00 6802 25.7 0.1 2.3 -285.4 6.0 13.2 0.5 IPC AAT 19MM 25.0 0.0 1.00 3422 31.2 -0.1 0.6 -282.4 3.9 12.3 0.7 IPC AAT 19MM 25.0 0.0 0.10 1466 32.8 0.0 1.4 -198.9 3.3 14.6 0.8 IPC AAT 19MM 45.0 0.0 10.00 1694 34.7 0.5 5.0 -250.7 7.0 6.0 0.8 IPC AAT 19MM 45.0 0.0 1.00 656 31.9 0.1 1.5 -57.5 4.8 5.4 0.9 IPC AAT 19MM 45.0 0.0 0.10 285 27.4 -0.2 5.3 -58.8 7.2 7.0 0.5 IPC AAT 19MM 45.0 0.0 10.00 1912 33.9 0.1 5.3 -199.8 7.2 12.5 0.3 IPC AAT 19MM 45.0 0.0 1.00 711 31.6 -0.5 1.5 -36.2 5.2 12.9 0.9 IPC AAT 19MM 45.0 0.0 0.10 281 29.1 -0.3 5.3 1.5 5.2 20.8 2.4 IPC AAT 19MM 45.0 0.0 10.00 1643 35.0 0.0 4.6 -246.7 8.1 26.0 1.3 IPC AAT 19MM 45.0 0.0 1.00 632 32.7 -0.5 1.5 -32.6 4.8 23.6 2.4 IPC AAT 19MM 45.0 0.0 0.10 285 28.1 -2.0 5.7 95.0 5.2 26.5 2.2
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-5 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC AAT 19MM 45.0 0.0 10.00 1583 35.2 0.1 5.0 -203.8 6.9 13.6 0.1 IPC AAT 19MM 45.0 0.0 1.00 578 32.6 -1.1 1.6 -22.1 4.8 16.6 0.6 IPC AAT 19MM 45.0 0.0 0.10 248 28.0 0.5 6.1 52.3 4.9 22.5 0.7 IPC AAT 19MM 45.0 0.0 10.00 1735 35.2 -0.2 5.5 -259.3 8.5 11.4 0.6 IPC AAT 19MM 45.0 0.0 1.00 642 32.9 1.3 1.9 -54.1 5.1 13.5 1.0 IPC AAT 19MM 45.0 0.0 0.10 267 29.1 4.9 4.7 5.7 5.1 13.3 0.9 IPC AAT 19MM 45.0 0.0 10.00 1825 35.2 0.1 5.3 -274.6 8.2 8.2 1.5 IPC AAT 19MM 45.0 0.0 1.00 694 32.8 1.1 1.9 -61.5 5.0 9.5 1.3 IPC AAT 19MM 45.0 0.0 0.10 286 29.4 1.1 4.1 22.0 5.2 8.8 1.8 IPC AAT 19MM 45.0 0.0 10.00 1621 34.5 0.1 5.3 -254.4 8.0 14.8 0.8 IPC AAT 19MM 45.0 0.0 1.00 617 32.2 0.1 1.7 -56.9 5.0 16.5 1.4 IPC AAT 19MM 45.0 0.0 0.10 261 28.5 0.4 4.7 10.6 4.9 22.1 0.9 IPC AAT 19MM 45.0 0.0 10.00 1351 35.6 -0.4 5.8 -244.3 8.2 17.2 0.9 IPC AAT 19MM 45.0 0.0 1.00 502 32.8 0.2 2.6 -44.0 5.1 18.6 1.4 IPC AAT 19MM 45.0 0.0 0.10 214 27.7 -0.7 6.8 31.2 5.3 25.5 1.8 IPC AAT 19MM 45.0 138.0 10.00 2312 29.4 0.1 3.7 -156.1 5.5 12.8 1.7 IPC AAT 19MM 45.0 138.0 1.00 1336 23.8 0.1 0.9 -53.9 3.1 11.8 1.9 IPC AAT 19MM 45.0 138.0 0.10 956 18.6 -0.1 2.1 -51.6 3.6 14.7 1.7 IPC AAT 19MM 45.0 138.0 10.00 2444 28.7 -0.1 3.1 -113.0 4.8 10.3 0.2 IPC AAT 19MM 45.0 138.0 1.00 1394 23.1 0.3 1.3 -44.8 3.1 10.9 0.4 IPC AAT 19MM 45.0 138.0 0.10 1002 17.3 0.1 1.7 -40.6 3.2 10.7 0.3 IPC AAT 19MM 45.0 138.0 10.00 2415 27.1 0.2 3.3 -135.7 5.1 25.5 0.8 IPC AAT 19MM 45.0 138.0 1.00 1461 21.7 0.0 0.8 -53.8 2.8 21.8 1.1 IPC AAT 19MM 45.0 138.0 0.10 1094 16.4 -0.1 1.7 -46.3 3.1 17.3 0.8 IPC AAT 19MM 45.0 138.0 10.00 2310 27.8 -0.2 3.8 -103.5 4.8 8.4 0.3 IPC AAT 19MM 45.0 138.0 1.00 1376 22.0 -0.3 0.8 -49.1 2.8 9.8 0.5 IPC AAT 19MM 45.0 138.0 0.10 1029 16.5 0.7 1.9 -47.5 3.1 10.1 0.5 IPC AAT 19MM 45.0 138.0 10.00 2092 32.2 0.1 3.7 -170.0 6.0 2.0 0.5 IPC AAT 19MM 45.0 138.0 1.00 1038 27.7 0.8 1.3 -42.2 3.5 5.6 0.6 IPC AAT 19MM 45.0 138.0 0.10 636 22.5 -2.0 3.4 -14.0 4.0 10.1 0.6 IPC AAT 19MM 45.0 138.0 10.00 2388 29.2 0.0 2.9 -119.2 4.4 5.9 1.4 IPC AAT 19MM 45.0 138.0 1.00 1364 23.5 -0.2 1.0 -36.6 2.9 7.2 1.1 IPC AAT 19MM 45.0 138.0 0.10 971 17.5 0.6 2.6 -26.1 3.1 7.1 0.7 IPC AAT 19MM 45.0 138.0 10.00 2094 29.1 -0.1 3.2 -138.6 4.9 4.8 1.1 IPC AAT 19MM 45.0 138.0 1.00 1169 23.9 0.8 1.3 -48.3 3.2 10.8 1.7 IPC AAT 19MM 45.0 138.0 0.10 828 18.5 1.0 2.8 -72.3 5.0 12.8 1.4
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-6 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC AAT 19MM 45.0 138.0 10.00 1984 28.6 -0.1 2.9 -101.7 4.0 11.5 0.9 IPC AAT 19MM 45.0 138.0 1.00 1157 22.1 1.7 1.5 -36.1 2.8 11.4 1.1 IPC AAT 19MM 45.0 138.0 0.10 857 16.3 0.0 2.7 -37.6 2.9 10.0 0.9 IPC FHWA 95MM 25.0 0.0 10.00 5183 29.3 -0.1 3.0 -383.1 7.5 7.8 0.5 IPC FHWA 95MM 25.0 0.0 1.00 2337 34.4 -0.5 0.8 -290.9 4.3 6.6 1.0 IPC FHWA 95MM 25.0 0.0 0.10 915 33.6 -0.4 1.9 -127.0 3.0 8.9 1.1 IPC FHWA 95MM 25.0 0.0 10.00 5424 28.0 0.0 2.8 -280.7 6.7 10.1 0.3 IPC FHWA 95MM 25.0 0.0 1.00 2467 32.4 0.2 0.7 -164.7 3.1 10.0 0.6 IPC FHWA 95MM 25.0 0.0 0.10 949 32.5 -0.2 1.6 -47.3 3.0 10.1 0.6 IPC FHWA 95MM 25.0 0.0 10.00 5230 29.6 0.0 2.8 -395.3 7.4 8.5 0.5 IPC FHWA 95MM 25.0 0.0 1.00 2378 34.4 0.0 0.7 -341.6 4.6 9.7 0.1 IPC FHWA 95MM 25.0 0.0 0.10 964 33.3 0.0 1.5 -168.0 3.3 10.9 0.4 IPC FHWA 95MM 25.0 0.0 10.00 5491 27.6 0.1 2.8 -271.2 6.6 18.0 0.4 IPC FHWA 95MM 25.0 0.0 1.00 2528 32.0 0.2 0.7 -168.4 3.3 19.2 0.5 IPC FHWA 95MM 25.0 0.0 0.10 988 32.6 0.1 1.6 -53.8 3.2 19.3 0.9 IPC FHWA 95MM 25.0 0.0 10.00 4835 30.1 0.0 3.1 -381.5 7.6 13.3 0.5 IPC FHWA 95MM 25.0 0.0 1.00 2130 34.6 0.1 0.8 -272.9 4.1 14.2 0.9 IPC FHWA 95MM 25.0 0.0 0.10 819 34.0 -0.1 2.2 -89.3 3.3 12.8 0.9 IPC FHWA 95MM 25.0 0.0 10.00 5224 28.9 0.1 3.0 -366.4 6.9 12.9 0.4 IPC FHWA 95MM 25.0 0.0 1.00 2422 33.9 0.0 0.7 -314.9 4.3 10.8 0.5 IPC FHWA 95MM 25.0 0.0 0.10 999 33.2 0.1 1.6 -172.3 3.5 7.9 0.5 IPC FHWA 95MM 25.0 0.0 10.00 4535 30.1 0.1 3.1 -410.0 7.3 24.9 0.5 IPC FHWA 95MM 25.0 0.0 1.00 2002 34.9 -0.2 0.8 -371.8 4.6 25.3 0.4 IPC FHWA 95MM 25.0 0.0 0.10 795 33.9 0.6 1.7 -183.0 4.1 23.0 0.6 IPC FHWA 95MM 25.0 0.0 10.00 5021 30.5 -0.2 3.0 -414.7 7.6 8.8 0.3 IPC FHWA 95MM 25.0 0.0 1.00 2179 35.7 -0.2 1.2 -317.6 4.8 7.6 0.3 IPC FHWA 95MM 25.0 0.0 0.10 818 35.0 1.0 2.9 -97.7 2.9 5.9 0.0 IPC FHWA 95MM 45.0 0.0 10.00 1014 39.0 -0.1 7.0 -282.2 8.6 4.0 0.7 IPC FHWA 95MM 45.0 0.0 1.00 353 34.2 1.7 3.6 -27.4 5.7 8.2 0.9 IPC FHWA 95MM 45.0 0.0 0.10 142 27.9 0.5 8.8 143.4 5.8 10.9 0.8 IPC FHWA 95MM 45.0 0.0 10.00 1041 37.6 -0.2 8.9 -249.6 9.1 7.4 0.7 IPC FHWA 95MM 45.0 0.0 1.00 365 33.0 1.0 2.5 -24.1 5.5 5.8 0.6 IPC FHWA 95MM 45.0 0.0 0.10 153 27.1 2.2 4.6 68.4 5.1 4.7 0.9 IPC FHWA 95MM 45.0 0.0 10.00 1035 37.3 -0.2 7.3 -150.4 7.8 19.5 1.9 IPC FHWA 95MM 45.0 0.0 1.00 341 34.7 0.6 2.4 0.4 4.8 16.9 2.2 IPC FHWA 95MM 45.0 0.0 0.10 140 28.6 1.4 4.1 120.1 5.4 15.2 1.9
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-7 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC FHWA 95MM 45.0 0.0 10.00 1045 37.0 -0.7 7.8 -230.9 8.4 11.4 0.2 IPC FHWA 95MM 45.0 0.0 1.00 371 33.1 2.9 2.4 -23.8 4.8 9.7 0.2 IPC FHWA 95MM 45.0 0.0 0.10 158 27.7 -1.6 5.2 74.4 5.2 7.7 0.1 IPC FHWA 95MM 45.0 0.0 10.00 728 40.1 -1.4 8.6 -281.0 9.6 7.8 1.0 IPC FHWA 95MM 45.0 0.0 1.00 235 35.2 1.7 2.9 -7.2 5.4 7.2 0.9 IPC FHWA 95MM 45.0 0.0 95.80 96 29.0 0.6 5.0 148.7 7.4 9.6 0.3 IPC FHWA 95MM 45.0 0.0 10.00 1023 36.9 -0.5 8.1 -147.3 7.9 3.2 0.2 IPC FHWA 95MM 45.0 0.0 1.00 364 32.7 0.2 2.5 -14.9 5.1 7.9 0.6 IPC FHWA 95MM 45.0 0.0 95.80 159 26.8 -0.3 5.5 57.2 5.6 11.3 1.1 IPC FHWA 95MM 45.0 0.0 10.00 1053 38.1 -0.3 9.2 -289.6 9.5 6.8 0.9 IPC FHWA 95MM 45.0 0.0 1.00 366 34.0 1.5 2.9 -25.8 5.8 7.2 2.0 IPC FHWA 95MM 45.0 0.0 95.80 141 29.4 -0.8 5.9 131.0 5.7 9.4 2.4 IPC FHWA 95MM 45.0 0.0 10.00 873 41.5 -0.3 9.3 -265.2 9.5 9.6 0.8 IPC FHWA 95MM 45.0 0.0 1.00 274 36.9 1.6 4.0 23.4 6.5 13.9 0.9 IPC FHWA 95MM 45.0 0.0 95.80 107 29.5 0.9 6.7 353.3 4.8 17.1 0.2 IPC FHWA 95MM 45.0 138.0 10.00 1340 30.9 -0.2 4.3 -75.5 4.8 7.5 0.3 IPC FHWA 95MM 45.0 138.0 1.00 804 21.6 0.0 1.1 -22.0 2.3 8.4 0.1 IPC FHWA 95MM 45.0 138.0 0.10 595 14.3 -0.5 2.4 -10.7 3.1 9.0 0.1 IPC FHWA 95MM 45.0 138.0 10.00 1519 28.9 -0.2 4.1 -92.7 4.6 5.7 0.6 IPC FHWA 95MM 45.0 138.0 1.00 946 20.5 -1.1 1.1 -31.4 2.5 2.6 0.8 IPC FHWA 95MM 45.0 138.0 0.10 739 13.8 0.3 1.9 -33.3 3.3 2.7 0.3 IPC FHWA 95MM 45.0 138.0 10.00 1312 32.1 -0.2 5.0 -124.1 5.9 15.1 1.0 IPC FHWA 95MM 45.0 138.0 1.00 626 26.9 -0.8 1.6 -21.3 3.4 21.9 0.9 IPC FHWA 95MM 45.0 138.0 0.10 308 22.5 -0.8 3.4 -16.1 4.7 22.7 1.5 IPC FHWA 95MM 45.0 138.0 10.00 1717 30.3 0.1 3.9 -145.7 5.4 15.3 1.4 IPC FHWA 95MM 45.0 138.0 1.00 1025 22.1 -0.2 1.0 -45.6 2.6 18.7 1.2 IPC FHWA 95MM 45.0 138.0 0.10 756 15.1 0.9 1.7 -21.7 2.9 18.4 0.7 IPC FHWA 95MM 45.0 138.0 10.00 1267 30.4 0.0 4.2 -159.7 6.4 8.1 0.6 IPC FHWA 95MM 45.0 138.0 1.00 808 21.0 1.2 1.2 -59.8 2.6 7.8 0.9 IPC FHWA 95MM 45.0 138.0 0.10 641 13.6 1.1 2.1 -41.3 3.3 6.0 0.6 IPC FHWA 95MM 45.0 138.0 10.00 1346 33.5 -0.3 4.2 -132.2 5.9 5.4 0.5 IPC FHWA 95MM 45.0 138.0 1.00 571 29.6 0.4 1.4 -10.3 3.4 5.0 0.5 IPC FHWA 95MM 45.0 138.0 0.10 295 24.4 0.4 3.7 1.9 4.7 4.3 0.6 IPC FHWA 95MM 45.0 138.0 10.00 1453 32.0 -0.3 4.2 -146.1 5.8 3.4 2.0 IPC FHWA 95MM 45.0 138.0 1.00 686 27.2 1.1 1.5 -10.5 3.7 1.8 2.0 IPC FHWA 95MM 45.0 138.0 0.10 360 24.0 0.6 4.2 -139.8 22.3 5.2 1.9
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-8 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC FHWA 95MM 45.0 138.0 10.00 1296 31.9 0.2 5.3 -159.9 6.0 10.3 1.6 IPC FHWA 95MM 45.0 138.0 1.00 778 22.7 0.2 1.3 -64.1 2.9 13.4 1.5 IPC FHWA 95MM 45.0 138.0 0.10 590 15.7 0.4 1.9 -61.8 3.7 25.6 0.9 IPC FHWA 19MM 25.0 0.0 10.00 7976 24.5 0.1 2.2 -257.6 5.6 9.9 0.3 IPC FHWA 19MM 25.0 0.0 1.00 4178 29.4 0.0 0.6 -243.0 4.3 10.0 0.5 IPC FHWA 19MM 25.0 0.0 0.10 1902 30.7 0.1 1.1 -139.9 3.2 10.8 0.8 IPC FHWA 19MM 25.0 0.0 10.00 8639 24.8 0.0 2.2 -274.5 5.7 8.4 1.0 IPC FHWA 19MM 25.0 0.0 1.00 4494 29.9 0.0 0.5 -257.8 4.0 5.8 1.4 IPC FHWA 19MM 25.0 0.0 0.10 1989 31.1 -0.4 0.9 -150.0 2.9 6.6 1.5 IPC FHWA 19MM 25.0 0.0 10.00 7637 25.5 0.1 2.2 -298.8 5.9 11.8 0.3 IPC FHWA 19MM 25.0 0.0 1.00 3880 31.1 0.4 0.6 -301.0 3.9 12.0 0.8 IPC FHWA 19MM 25.0 0.0 0.10 1668 32.8 -0.1 1.0 -200.6 3.5 11.6 1.5 IPC FHWA 19MM 25.0 0.0 10.00 7945 25.2 0.0 2.0 -294.8 5.8 22.1 1.0 IPC FHWA 19MM 25.0 0.0 1.00 4083 30.2 0.4 0.6 -275.5 4.1 19.7 1.5 IPC FHWA 19MM 25.0 0.0 0.10 1785 31.1 0.2 0.8 -188.4 6.2 17.4 1.8 IPC FHWA 19MM 25.0 0.0 10.00 8427 23.4 -0.1 2.3 -261.6 5.5 6.2 0.8 IPC FHWA 19MM 25.0 0.0 1.00 4539 29.1 0.1 0.6 -280.6 3.9 6.2 1.1 IPC FHWA 19MM 25.0 0.0 0.10 2104 31.2 -0.3 1.1 -209.6 3.7 4.5 1.2 IPC FHWA 19MM 25.0 0.0 10.00 8629 23.7 0.0 2.9 -220.6 5.5 6.4 0.2 IPC FHWA 19MM 25.0 0.0 1.00 4551 28.8 0.2 0.5 -184.8 3.2 6.0 0.3 IPC FHWA 19MM 25.0 0.0 0.10 1992 31.3 -0.1 1.0 -110.5 2.9 5.1 0.9 IPC FHWA 19MM 25.0 0.0 10.00 7857 24.9 -0.1 2.3 -264.4 5.6 19.2 0.4 IPC FHWA 19MM 25.0 0.0 1.00 4054 30.4 0.2 0.6 -273.8 4.0 17.6 0.6 IPC FHWA 19MM 25.0 0.0 0.10 1803 32.2 0.1 1.1 -186.9 3.1 14.5 1.2 IPC FHWA 19MM 25.0 0.0 10.00 5934 27.8 0.0 2.8 -286.1 6.6 14.6 0.3 IPC FHWA 19MM 25.0 0.0 1.00 2804 32.3 0.3 0.6 -203.0 3.3 13.9 0.2 IPC FHWA 19MM 25.0 0.0 0.10 1178 32.6 0.3 1.3 -86.8 3.3 10.7 0.3 IPC FHWA 19MM 45.0 0.0 10.00 2010 33.5 0.1 4.8 -216.8 7.5 10.8 0.5 IPC FHWA 19MM 45.0 0.0 1.00 769 31.8 1.7 1.7 -32.7 4.6 10.5 0.7 IPC FHWA 19MM 45.0 0.0 0.10 339 27.4 -0.6 4.4 39.3 4.9 9.4 1.2 IPC FHWA 19MM 45.0 0.0 10.00 1978 32.8 2.8 4.1 -271.4 7.6 5.3 0.8 IPC FHWA 19MM 45.0 0.0 1.00 650 32.4 -0.8 1.6 -21.5 4.2 12.7 0.8 IPC FHWA 19MM 45.0 0.0 0.10 313 26.5 1.1 3.5 1.3 4.7 18.6 0.7 IPC FHWA 19MM 45.0 0.0 10.00 1548 36.1 -0.1 5.7 -260.9 8.0 6.8 1.0 IPC FHWA 19MM 45.0 0.0 1.00 542 33.7 0.7 1.7 -45.4 5.0 6.5 0.0 IPC FHWA 19MM 45.0 0.0 0.10 223 29.0 0.1 4.7 25.2 5.2 11.1 1.7
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-9 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC FHWA 19MM 45.0 0.0 10.00 1821 33.7 0.1 4.8 -183.3 6.8 22.8 0.9 IPC FHWA 19MM 45.0 0.0 1.00 677 30.8 0.9 1.4 -32.5 4.8 24.2 0.2 IPC FHWA 19MM 45.0 0.0 0.10 288 26.1 -0.3 3.8 6.5 5.4 25.5 1.0 IPC FHWA 19MM 45.0 0.0 10.00 2050 34.3 -0.3 5.1 -255.5 7.9 9.1 0.7 IPC FHWA 19MM 45.0 0.0 1.00 797 31.3 0.1 1.4 -53.4 5.0 9.2 1.1 IPC FHWA 19MM 45.0 0.0 0.10 366 26.3 0.2 3.5 -13.4 5.8 8.9 1.1 IPC FHWA 19MM 45.0 0.0 10.00 2054 35.0 -0.1 5.1 -255.1 8.1 17.0 1.3 IPC FHWA 19MM 45.0 0.0 1.00 740 33.5 0.6 1.2 -54.9 4.6 16.9 1.6 IPC FHWA 19MM 45.0 0.0 0.10 300 29.8 0.5 4.3 -24.3 5.9 15.9 1.5 IPC FHWA 19MM 45.0 0.0 10.00 1719 35.1 0.5 5.1 -254.5 7.6 9.9 1.4 IPC FHWA 19MM 45.0 0.0 1.00 645 32.3 0.0 1.5 -47.4 5.1 8.6 2.2 IPC FHWA 19MM 45.0 0.0 0.10 265 28.3 0.2 3.6 25.0 5.1 14.3 2.0 IPC FHWA 19MM 45.0 0.0 10.00 1590 35.8 -0.2 5.2 -259.1 8.2 16.8 0.5 IPC FHWA 19MM 45.0 0.0 1.00 582 32.9 0.2 1.5 -53.7 4.9 19.0 0.9 IPC FHWA 19MM 45.0 0.0 0.10 241 28.4 2.0 4.1 5.9 4.9 25.3 0.8 IPC FHWA 19MM 45.0 138.0 10.00 2854 29.2 0.0 3.3 -157.5 5.3 9.1 1.2 IPC FHWA 19MM 45.0 138.0 1.00 1591 24.6 -0.5 0.8 -56.3 2.8 7.3 1.2 IPC FHWA 19MM 45.0 138.0 0.10 1084 19.0 0.0 1.3 -45.5 3.0 3.3 0.9 IPC FHWA 19MM 45.0 138.0 10.00 2657 35.0 -0.1 4.0 -138.0 6.8 12.9 7.0 IPC FHWA 19MM 45.0 138.0 1.00 1509 30.9 0.6 0.9 -46.5 4.8 21.2 8.9 IPC FHWA 19MM 45.0 138.0 0.10 1024 23.9 -0.1 1.4 -33.6 4.1 23.5 7.4 IPC FHWA 19MM 45.0 138.0 10.00 2371 29.0 0.0 3.5 -94.6 4.4 26.9 1.0 IPC FHWA 19MM 45.0 138.0 1.00 1354 23.1 -0.5 0.8 -31.8 2.4 28.1 1.0 IPC FHWA 19MM 45.0 138.0 0.10 995 16.7 0.6 1.2 -41.2 2.9 26.3 0.6 IPC FHWA 19MM 45.0 138.0 10.00 2448 28.2 0.0 3.5 -109.6 4.9 12.4 0.5 IPC FHWA 19MM 45.0 138.0 1.00 1400 22.6 -0.3 0.8 -50.1 2.8 17.4 0.3 IPC FHWA 19MM 45.0 138.0 0.10 993 17.0 0.9 1.4 -45.1 3.8 19.6 0.4 IPC FHWA 19MM 45.0 138.0 10.00 2702 29.5 0.0 3.8 -124.1 5.0 6.6 0.5 IPC FHWA 19MM 45.0 138.0 1.00 1385 25.9 -0.3 1.2 -40.6 5.5 12.5 0.2 IPC FHWA 19MM 45.0 138.0 0.10 765 22.1 0.1 2.0 -27.6 3.9 26.8 0.7 IPC FHWA 19MM 45.0 138.0 10.00 2828 29.7 -0.2 3.3 -155.8 5.3 4.4 1.0 IPC FHWA 19MM 45.0 138.0 1.00 1551 24.5 0.0 1.3 -61.0 3.0 7.3 1.4 IPC FHWA 19MM 45.0 138.0 0.10 1064 17.8 0.2 1.9 -55.5 4.0 10.3 1.6 IPC FHWA 19MM 45.0 138.0 10.00 2165 29.0 0.4 4.6 -110.5 5.4 9.4 0.4 IPC FHWA 19MM 45.0 138.0 1.00 1271 22.3 -0.7 1.1 -41.5 2.8 10.5 0.4 IPC FHWA 19MM 45.0 138.0 0.10 932 15.9 -0.2 1.9 -34.9 3.3 12.4 0.5
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-10 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. IPC FHWA 19MM 45.0 138.0 10.00 2243 31.3 -0.2 3.6 -154.3 5.6 11.7 0.7 IPC FHWA 19MM 45.0 138.0 1.00 1262 25.1 0.6 0.9 -69.2 2.8 11.6 1.0 IPC FHWA 19MM 45.0 138.0 0.10 897 18.7 0.4 2.1 -60.7 3.3 13.5 0.8 ITC AAT 95MM 25.0 0.0 10.00 6579 31.1 0.7 4.0 407.2 16.3 4.2 0.6 ITC AAT 95MM 25.0 0.0 1.00 2937 34.0 0.1 1.1 308.8 10.6 5.0 0.3 ITC AAT 95MM 25.0 0.0 0.10 1234 29.9 -1.0 -.- 134.7 -.- 1.9 0.9 ITC AAT 95MM 25.0 0.0 10.00 4656 29.3 0.6 4.5 335.0 14.7 9.3 0.6 ITC AAT 95MM 25.0 0.0 1.00 1974 31.0 0.0 1.4 168.6 9.4 10.9 0.5 ITC AAT 95MM 25.0 0.0 0.10 810 27.3 -0.8 -.- 85.2 -.- 11.0 0.8 ITC AAT 95MM 25.0 0.0 10.00 6153 30.5 0.9 3.9 422.2 15.4 17.1 0.4 ITC AAT 95MM 25.0 0.0 1.00 2817 33.5 0.1 1.1 357.1 10.9 19.7 0.8 ITC AAT 95MM 25.0 0.0 0.10 1193 29.7 -0.2 -.- 176.7 -.- 19.3 1.6 ITC AAT 95MM 25.0 0.0 10.00 5337 31.8 0.6 3.9 431.4 15.5 14.1 0.4 ITC AAT 95MM 25.0 0.0 1.00 2349 33.8 0.1 1.3 292.5 10.5 14.3 0.4 ITC AAT 95MM 25.0 0.0 0.10 975 29.3 -0.5 -.- 130.8 -.- 14.3 0.6 ITC AAT 95MM 25.0 0.0 10.00 5082 25.0 0.0 7.3 216.5 14.4 23.0 1.1 ITC AAT 95MM 25.0 0.0 1.00 2810 32.3 0.0 0.7 392.5 10.3 21.8 1.2 ITC AAT 95MM 25.0 0.0 0.10 1124 30.4 -0.8 -.- 150.1 -.- 18.0 2.5 ITC AAT 95MM 25.0 0.0 10.00 6340 27.0 0.6 3.9 338.9 13.8 25.4 0.5 ITC AAT 95MM 25.0 0.0 1.00 3050 31.0 0.0 0.8 309.1 10.0 23.8 0.8 ITC AAT 95MM 25.0 0.0 0.10 1260 29.6 -0.1 -.- 161.8 -.- 18.5 1.7 ITC AAT 95MM 25.0 0.0 10.00 6219 29.4 0.8 4.0 363.9 14.9 4.5 1.2 ITC AAT 95MM 25.0 0.0 1.00 2876 32.9 0.1 1.4 304.0 9.5 4.2 1.0 ITC AAT 95MM 25.0 0.0 0.10 1166 30.0 -0.7 -.- 119.6 -.- 5.0 1.4 ITC AAT 95MM 25.0 0.0 10.00 5515 27.6 0.5 4.2 345.5 13.6 4.0 2.3 ITC AAT 95MM 25.0 0.0 1.00 2568 31.3 0.2 1.6 289.2 10.0 8.1 1.7 ITC AAT 95MM 25.0 0.0 0.10 1080 28.8 -0.5 -.- 152.0 -.- 9.2 1.0 ITC AAT 95MM 45.0 0.0 10.00 923 35.5 -0.7 9.2 230.9 15.9 1.4 0.8 ITC AAT 95MM 45.0 0.0 1.00 402 28.5 0.2 4.0 79.2 7.5 9.7 1.8 ITC AAT 95MM 45.0 0.0 0.10 237 20.2 -1.6 -.- 15.1 -.- 14.8 1.4 ITC AAT 95MM 45.0 0.0 10.00 756 36.8 -1.0 9.1 241.0 17.1 2.7 0.2 ITC AAT 95MM 45.0 0.0 1.00 319 29.1 0.0 4.8 66.0 8.2 0.4 0.7 ITC AAT 95MM 45.0 0.0 0.10 181 19.9 12.5 -.- 99.0 -.- 8.3 1.2 ITC AAT 95MM 45.0 0.0 10.00 836 37.6 -1.9 9.2 246.4 17.6 5.6 0.2 ITC AAT 95MM 45.0 0.0 1.00 343 30.7 0.3 5.6 72.6 9.0 6.3 0.4 ITC AAT 95MM 45.0 0.0 0.10 186 22.2 11.0 -.- 69.7 -.- 9.1 0.1
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-11 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC AAT 95MM 45.0 0.0 10.00 797 37.6 -0.4 9.3 220.0 16.1 9.4 1.4 ITC AAT 95MM 45.0 0.0 1.00 334 29.6 0.6 5.2 63.1 8.1 16.1 1.4 ITC AAT 95MM 45.0 0.0 0.10 203 20.7 5.8 -.- 0.2 -.- 18.3 1.6 ITC AAT 95MM 45.0 0.0 10.00 810 36.3 0.7 8.5 228.6 18.2 12.3 1.4 ITC AAT 95MM 45.0 0.0 1.00 343 29.0 0.0 2.6 82.4 8.5 10.5 0.3 ITC AAT 95MM 45.0 0.0 0.10 195 21.7 1.8 -.- 81.6 -.- 10.2 0.0 ITC AAT 95MM 45.0 0.0 10.00 850 38.1 -0.3 8.8 229.7 16.2 7.1 0.5 ITC AAT 95MM 45.0 0.0 1.00 337 30.4 0.3 5.3 76.8 8.4 9.7 0.5 ITC AAT 95MM 45.0 0.0 0.10 180 23.0 6.4 -.- 68.0 -.- 10.8 0.6 ITC AAT 95MM 45.0 0.0 10.00 872 38.4 -0.4 8.5 265.5 16.4 1.6 1.5 ITC AAT 95MM 45.0 0.0 1.00 355 31.3 0.3 7.0 76.7 8.4 1.0 1.8 ITC AAT 95MM 45.0 0.0 0.10 183 23.9 2.2 -.- 18.1 -.- 1.6 1.7 ITC AAT 95MM 45.0 0.0 10.00 838 37.3 -1.0 8.4 213.4 16.1 1.6 0.1 ITC AAT 95MM 45.0 0.0 1.00 356 29.9 0.3 4.4 56.5 7.4 4.5 0.1 ITC AAT 95MM 45.0 0.0 0.10 190 23.0 4.3 -.- 37.0 -.- 8.9 0.7 ITC AAT 95MM 45.0 138.0 10.00 1267 26.7 0.2 9.5 84.0 11.0 11.9 3.7 ITC AAT 95MM 45.0 138.0 1.00 780 19.8 0.1 1.5 26.8 6.7 16.3 1.9 ITC AAT 95MM 45.0 138.0 0.10 610 13.7 0.7 -.- 5.7 -.- 16.3 1.5 ITC AAT 95MM 45.0 138.0 10.00 1670 27.5 0.3 6.9 58.7 6.9 3.2 0.8 ITC AAT 95MM 45.0 138.0 1.00 1021 19.6 -0.1 1.7 22.3 4.2 4.9 1.6 ITC AAT 95MM 45.0 138.0 0.10 805 12.5 -0.3 -.- 8.7 -.- 7.1 1.0 ITC AAT 95MM 45.0 138.0 10.00 1545 27.6 0.3 6.7 99.7 8.5 8.2 2.1 ITC AAT 95MM 45.0 138.0 1.00 906 20.3 0.1 2.2 31.4 4.3 4.8 0.8 ITC AAT 95MM 45.0 138.0 0.10 702 13.8 0.4 -.- 10.8 -.- 3.0 0.1 ITC AAT 95MM 45.0 138.0 10.00 1431 28.4 0.3 6.6 115.0 7.8 11.0 0.9 ITC AAT 95MM 45.0 138.0 1.00 861 21.3 0.1 2.1 36.4 4.7 8.9 0.9 ITC AAT 95MM 45.0 138.0 0.10 654 15.2 -0.6 -.- 0.5 -.- 7.2 0.9 ITC AAT 95MM 45.0 138.0 10.00 1696 26.4 0.2 6.9 95.6 9.8 27.5 0.4 ITC AAT 95MM 45.0 138.0 1.00 1045 19.4 0.2 1.2 40.0 5.0 26.9 0.4 ITC AAT 95MM 45.0 138.0 0.10 825 12.1 0.7 -.- 25.8 -.- 26.7 0.6 ITC AAT 95MM 45.0 138.0 10.00 1619 26.6 0.2 6.5 94.5 9.0 26.9 2.7 ITC AAT 95MM 45.0 138.0 1.00 992 19.6 -0.1 2.1 36.1 5.2 15.2 1.5 ITC AAT 95MM 45.0 138.0 0.10 794 12.3 0.3 -.- 17.2 -.- 10.3 0.9 ITC AAT 95MM 45.0 138.0 10.00 1553 27.3 0.0 11.4 42.4 12.0 18.6 0.6 ITC AAT 95MM 45.0 138.0 1.00 773 23.3 -0.1 2.7 28.4 4.8 16.3 0.4 ITC AAT 95MM 45.0 138.0 0.10 532 16.5 1.1 -.- 5.8 -.- 18.9 1.4
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-12 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC AAT 95MM 45.0 138.0 10.00 1535 26.8 0.4 6.9 128.0 8.3 30.0 2.4 ITC AAT 95MM 45.0 138.0 1.00 888 22.0 0.0 1.7 62.6 5.7 15.3 0.2 ITC AAT 95MM 45.0 138.0 0.10 757 13.9 0.8 -.- 33.7 -.- 14.0 0.0 ITC AAT 19MM 25.0 0.0 10.00 10820 31.3 0.9 3.3 402.8 16.7 30.8 5.4 ITC AAT 19MM 25.0 0.0 1.00 4983 33.8 0.0 0.7 332.4 12.0 33.3 2.2 ITC AAT 19MM 25.0 0.0 0.10 2105 31.4 -0.1 -.- 189.3 -.- 33.2 1.3 ITC AAT 19MM 25.0 0.0 10.00 8212 24.8 0.7 3.3 249.3 15.1 42.6 0.6 ITC AAT 19MM 25.0 0.0 1.00 3962 29.5 0.1 0.8 162.2 10.3 34.1 0.5 ITC AAT 19MM 25.0 0.0 0.10 1757 28.0 0.4 -.- 78.0 -.- 27.0 0.5 ITC AAT 19MM 25.0 0.0 10.00 9543 27.2 0.6 3.1 245.4 15.1 1.3 0.2 ITC AAT 19MM 25.0 0.0 1.00 4587 31.4 0.1 0.6 136.5 9.4 1.0 1.4 ITC AAT 19MM 25.0 0.0 0.10 2013 28.6 0.2 -.- 63.1 -.- 1.3 1.6 ITC AAT 19MM 25.0 0.0 10.00 6210 27.2 0.8 3.8 344.4 12.9 6.4 3.0 ITC AAT 19MM 25.0 0.0 1.00 3097 31.2 -0.1 1.0 331.4 11.2 10.0 1.6 ITC AAT 19MM 25.0 0.0 0.10 1433 31.7 -0.9 -.- 211.1 -.- 13.3 0.4 ITC AAT 19MM 25.0 0.0 10.00 7797 26.0 0.6 3.5 298.9 12.3 12.4 3.1 ITC AAT 19MM 25.0 0.0 1.00 4098 30.1 0.0 0.9 321.5 10.5 3.4 0.6 ITC AAT 19MM 25.0 0.0 0.10 1946 30.1 0.1 -.- 249.0 -.- 2.0 1.5 ITC AAT 19MM 25.0 0.0 10.00 7989 23.7 0.6 3.5 290.5 12.2 18.8 1.0 ITC AAT 19MM 25.0 0.0 1.00 3963 28.0 0.0 0.8 217.7 10.3 20.8 2.1 ITC AAT 19MM 25.0 0.0 0.10 1970 26.9 -0.2 -.- 167.0 -.- 16.8 1.5 ITC AAT 19MM 25.0 0.0 10.00 6156 23.8 0.6 3.8 292.6 12.0 4.6 3.0 ITC AAT 19MM 25.0 0.0 1.00 3433 28.6 -0.2 0.9 295.7 9.8 1.6 1.8 ITC AAT 19MM 25.0 0.0 0.10 1624 28.6 0.2 -.- 195.9 -.- 0.3 0.4 ITC AAT 19MM 25.0 0.0 10.00 7471 25.2 0.6 3.6 306.7 13.5 11.3 1.6 ITC AAT 19MM 25.0 0.0 1.00 4132 30.7 0.0 0.8 319.6 11.1 16.7 1.0 ITC AAT 19MM 25.0 0.0 0.10 1824 30.2 0.9 -.- 177.8 -.- 20.0 0.2 ITC AAT 19MM 45.0 0.0 10.00 1471 38.9 0.3 11.3 261.4 19.8 4.0 2.1 ITC AAT 19MM 45.0 0.0 1.00 584 33.0 0.2 3.1 85.2 9.5 5.1 4.7 ITC AAT 19MM 45.0 0.0 0.10 277 26.0 4.7 -.- 14.5 -.- 2.5 2.4 ITC AAT 19MM 45.0 0.0 10.00 1221 36.8 -0.8 11.2 311.9 20.3 21.6 0.2 ITC AAT 19MM 45.0 0.0 1.00 479 33.1 0.4 4.2 125.7 11.2 22.1 1.9 ITC AAT 19MM 45.0 0.0 0.10 211 28.4 0.3 -.- 48.8 -.- 25.5 2.4 ITC AAT 19MM 45.0 0.0 10.00 1085 41.0 -0.4 10.7 346.3 23.8 8.6 3.4 ITC AAT 19MM 45.0 0.0 1.00 402 35.7 0.2 6.3 85.9 9.5 0.1 2.0 ITC AAT 19MM 45.0 0.0 0.10 184 27.2 5.7 -.- 7.3 -.- 11.2 1.0
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-13 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC AAT 19MM 45.0 0.0 10.00 1364 34.0 -0.2 10.8 252.6 17.9 14.4 0.7 ITC AAT 19MM 45.0 0.0 1.00 596 31.9 -0.3 4.7 76.4 9.5 15.0 1.1 ITC AAT 19MM 45.0 0.0 0.10 278 26.6 -0.9 -.- 1.1 -.- 18.8 0.9 ITC AAT 19MM 45.0 0.0 10.00 1367 38.6 -0.1 8.1 279.3 17.4 18.5 1.8 ITC AAT 19MM 45.0 0.0 1.00 524 32.6 -0.1 3.8 98.3 8.9 18.8 0.1 ITC AAT 19MM 45.0 0.0 0.10 251 24.6 6.6 -.- 58.5 -.- 23.7 0.6 ITC AAT 19MM 45.0 0.0 10.00 1746 32.7 0.1 7.1 241.1 13.8 9.5 0.9 ITC AAT 19MM 45.0 0.0 1.00 791 26.2 0.0 2.5 118.1 8.3 10.4 0.0 ITC AAT 19MM 45.0 0.0 0.10 452 18.6 0.3 -.- 83.2 -.- 13.8 0.1 ITC AAT 19MM 45.0 0.0 10.00 1816 31.7 0.5 7.4 206.2 14.6 19.6 0.6 ITC AAT 19MM 45.0 0.0 1.00 798 26.9 0.0 3.2 75.6 8.7 25.2 0.6 ITC AAT 19MM 45.0 0.0 0.10 389 22.7 1.8 -.- 36.8 -.- 35.4 1.1 ITC AAT 19MM 45.0 0.0 10.00 1555 35.7 -0.2 8.5 309.4 19.1 3.7 0.2 ITC AAT 19MM 45.0 0.0 1.00 611 31.1 0.7 3.7 113.6 9.2 8.4 1.5 ITC AAT 19MM 45.0 0.0 0.10 293 25.8 -1.5 -.- 23.6 -.- 13.4 1.1 ITC AAT 19MM 45.0 138.0 10.00 2738 29.6 0.4 5.8 124.2 9.6 2.4 1.8 ITC AAT 19MM 45.0 138.0 1.00 1456 23.5 0.0 1.5 49.2 6.2 4.3 0.2 ITC AAT 19MM 45.0 138.0 0.10 956 17.8 0.2 -.- 16.4 -.- 5.8 0.1 ITC AAT 19MM 45.0 138.0 10.00 2247 28.4 0.4 5.1 112.3 7.4 13.5 0.8 ITC AAT 19MM 45.0 138.0 1.00 1280 20.8 0.1 1.2 50.7 5.1 17.0 0.8 ITC AAT 19MM 45.0 138.0 0.10 916 14.6 0.2 -.- 16.7 -.- 20.6 0.5 ITC AAT 19MM 45.0 138.0 10.00 2217 31.8 0.4 5.8 106.3 11.2 41.8 0.3 ITC AAT 19MM 45.0 138.0 1.00 1287 22.3 0.2 1.4 41.6 4.9 26.0 1.1 ITC AAT 19MM 45.0 138.0 0.10 953 15.3 0.3 -.- 27.2 -.- 20.7 0.4 ITC AAT 19MM 45.0 138.0 10.00 2498 29.4 0.3 5.0 129.6 9.3 36.7 2.2 ITC AAT 19MM 45.0 138.0 1.00 1321 23.4 -0.1 1.4 60.0 5.7 39.5 1.4 ITC AAT 19MM 45.0 138.0 0.10 869 18.0 0.5 -.- 33.3 -.- 36.3 0.2 ITC AAT 19MM 45.0 138.0 10.00 2242 30.8 0.3 6.4 124.4 9.6 4.7 2.7 ITC AAT 19MM 45.0 138.0 1.00 1212 24.2 0.0 1.5 56.5 5.7 2.4 1.7 ITC AAT 19MM 45.0 138.0 0.10 799 18.4 -0.3 -.- 25.7 -.- 5.0 0.4 ITC AAT 19MM 45.0 138.0 10.00 2823 32.1 0.7 6.2 161.6 11.1 28.0 3.6 ITC AAT 19MM 45.0 138.0 1.00 1486 24.4 0.2 1.3 56.0 6.0 20.7 2.9 ITC AAT 19MM 45.0 138.0 0.10 1016 17.5 -0.2 -.- 27.4 -.- 14.9 2.0 ITC AAT 19MM 45.0 138.0 10.00 2386 30.6 0.3 6.5 131.0 8.7 2.2 1.7 ITC AAT 19MM 45.0 138.0 1.00 1311 23.1 0.1 1.3 67.2 5.7 3.9 2.5 ITC AAT 19MM 45.0 138.0 0.10 895 16.6 0.6 -.- 33.8 -.- 7.6 2.4
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-14 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC AAT 19MM 45.0 138.0 10.00 2303 30.2 0.2 6.4 124.4 10.0 5.3 0.4 ITC AAT 19MM 45.0 138.0 1.00 1239 23.4 0.2 1.4 56.4 5.6 0.4 0.6 ITC AAT 19MM 45.0 138.0 0.10 838 17.1 -0.5 -.- 29.7 -.- 0.6 0.2 ITC FHWA 95MM 25.0 0.0 10.00 6836 30.9 0.9 3.7 389.6 15.4 2.2 1.2 ITC FHWA 95MM 25.0 0.0 1.00 3080 33.5 0.2 1.2 303.7 10.4 0.3 0.4 ITC FHWA 95MM 25.0 0.0 0.10 1202 29.7 0.6 -.- 121.0 -.- 0.2 0.7 ITC FHWA 95MM 25.0 0.0 10.00 5948 30.5 0.7 3.9 428.7 15.4 5.9 0.3 ITC FHWA 95MM 25.0 0.0 1.00 2594 33.0 0.1 1.5 349.3 8.9 4.6 0.0 ITC FHWA 95MM 25.0 0.0 0.10 1048 29.0 -0.1 -.- 140.7 -.- 4.3 0.0 ITC FHWA 95MM 25.0 0.0 10.00 5612 30.6 0.6 3.8 410.0 15.7 14.4 2.3 ITC FHWA 95MM 25.0 0.0 1.00 2377 32.9 0.1 1.0 289.5 10.6 4.5 1.9 ITC FHWA 95MM 25.0 0.0 0.10 936 28.7 -0.1 -.- 159.7 -.- 0.7 0.7 ITC FHWA 95MM 25.0 0.0 10.00 6473 32.0 0.8 3.7 395.9 17.2 25.3 2.0 ITC FHWA 95MM 25.0 0.0 1.00 2761 34.1 0.0 1.4 272.0 9.3 21.6 1.9 ITC FHWA 95MM 25.0 0.0 0.10 1104 31.4 -0.5 -.- 127.3 -.- 22.9 1.4 ITC FHWA 95MM 25.0 0.0 10.00 4926 27.8 0.5 4.1 340.2 13.9 1.5 3.8 ITC FHWA 95MM 25.0 0.0 1.00 2274 30.7 -0.1 0.9 265.5 9.6 4.9 1.5 ITC FHWA 95MM 25.0 0.0 0.10 974 28.8 -0.1 -.- 161.2 -.- 0.0 0.2 ITC FHWA 95MM 25.0 0.0 10.00 5378 31.6 0.4 3.7 419.8 16.2 3.2 1.9 ITC FHWA 95MM 25.0 0.0 1.00 2369 33.3 0.1 0.9 295.1 9.5 1.6 0.9 ITC FHWA 95MM 25.0 0.0 0.10 1000 28.6 -0.2 -.- 145.5 -.- 1.2 1.1 ITC FHWA 95MM 25.0 0.0 10.00 5117 32.2 0.6 3.8 422.0 16.0 0.8 2.4 ITC FHWA 95MM 25.0 0.0 1.00 2167 33.8 -0.1 1.4 288.3 10.5 4.2 0.3 ITC FHWA 95MM 25.0 0.0 0.10 886 29.4 0.7 -.- 151.8 -.- 8.3 1.1 ITC FHWA 95MM 25.0 0.0 10.00 4536 28.0 0.5 4.0 227.1 13.6 8.7 2.2 ITC FHWA 95MM 25.0 0.0 1.00 2078 29.6 0.2 1.3 95.2 7.9 9.4 1.3 ITC FHWA 95MM 25.0 0.0 0.10 915 25.4 1.2 -.- 31.9 -.- 10.4 0.4 ITC FHWA 95MM 45.0 0.0 10.00 782 34.2 -0.6 9.2 195.7 13.8 11.8 0.6 ITC FHWA 95MM 45.0 0.0 1.00 353 26.4 0.3 3.2 75.7 7.9 9.5 0.6 ITC FHWA 95MM 45.0 0.0 0.10 213 18.0 5.3 -.- 115.0 -.- 8.5 1.2 ITC FHWA 95MM 45.0 0.0 10.00 720 34.9 -0.8 7.8 157.6 12.8 14.5 0.4 ITC FHWA 95MM 45.0 0.0 1.00 329 25.9 0.0 2.9 64.1 7.9 23.0 0.3 ITC FHWA 95MM 45.0 0.0 0.10 198 19.0 3.1 -.- 8.6 -.- 27.4 0.4 ITC FHWA 95MM 45.0 0.0 10.00 773 37.2 -0.5 7.9 189.2 14.8 11.5 1.0 ITC FHWA 95MM 45.0 0.0 1.00 331 28.9 0.1 2.0 71.2 7.8 15.2 0.4 ITC FHWA 95MM 45.0 0.0 0.10 187 21.3 0.8 -.- 40.9 -.- 13.6 0.4
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-15 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC FHWA 95MM 45.0 0.0 10.00 735 35.7 -0.1 7.7 133.0 13.5 1.6 0.8 ITC FHWA 95MM 45.0 0.0 1.00 330 27.2 0.0 5.3 47.2 8.2 0.2 0.7 ITC FHWA 95MM 45.0 0.0 0.10 195 18.3 9.8 -.- 66.5 -.- 2.3 0.2 ITC FHWA 95MM 45.0 0.0 10.00 879 36.4 -0.4 8.6 224.9 16.2 10.5 0.5 ITC FHWA 95MM 45.0 0.0 1.00 373 29.5 0.3 3.1 85.1 8.7 9.8 0.7 ITC FHWA 95MM 45.0 0.0 0.10 202 21.5 5.9 -.- 82.7 -.- 9.5 1.2 ITC FHWA 95MM 45.0 0.0 10.00 920 35.9 -1.0 9.4 486.0 9.2 6.0 1.3 ITC FHWA 95MM 45.0 0.0 1.00 408 26.4 0.2 4.6 54.9 8.8 4.4 0.6 ITC FHWA 95MM 45.0 0.0 0.10 0.0 -.- 0.0 -.- 0.0 0.0 ITC FHWA 95MM 45.0 0.0 10.00 730 35.8 0.7 9.5 219.2 23.6 8.5 0.6 ITC FHWA 95MM 45.0 0.0 1.00 294 28.8 0.5 3.9 28.0 7.5 9.8 0.4 ITC FHWA 95MM 45.0 0.0 0.10 158 21.9 2.0 -.- 2.8 -.- 5.5 0.6 ITC FHWA 95MM 45.0 0.0 10.00 896 33.5 0.4 8.7 282.9 15.5 11.3 0.1 ITC FHWA 95MM 45.0 0.0 1.00 348 26.9 0.1 3.2 66.1 7.8 10.8 0.4 ITC FHWA 95MM 45.0 0.0 0.10 217 19.5 4.1 -.- 56.1 -.- 11.4 0.4 ITC FHWA 95MM 45.0 138.0 10.00 1664 28.9 0.4 8.2 90.6 8.8 9.0 1.7 ITC FHWA 95MM 45.0 138.0 1.00 997 20.7 0.0 1.9 38.8 5.1 12.6 1.7 ITC FHWA 95MM 45.0 138.0 0.10 767 13.3 0.2 -.- 10.9 -.- 14.2 1.6 ITC FHWA 95MM 45.0 138.0 10.00 1500 26.7 0.5 6.8 93.0 7.7 4.3 2.3 ITC FHWA 95MM 45.0 138.0 1.00 932 19.1 0.1 1.3 43.3 4.9 6.8 1.9 ITC FHWA 95MM 45.0 138.0 0.10 715 12.4 0.7 -.- 15.8 -.- 8.5 1.3 ITC FHWA 95MM 45.0 138.0 10.00 1352 30.2 0.7 5.5 123.4 9.1 19.8 1.9 ITC FHWA 95MM 45.0 138.0 1.00 656 24.6 0.1 1.0 44.9 5.0 21.0 0.0 ITC FHWA 95MM 45.0 138.0 0.10 587 14.7 -0.4 -.- 24.6 -.- 25.4 0.6 ITC FHWA 95MM 45.0 138.0 10.00 1580 26.5 0.6 7.1 101.8 9.8 14.2 0.4 ITC FHWA 95MM 45.0 138.0 1.00 969 18.7 0.1 1.7 40.8 4.3 13.0 0.6 ITC FHWA 95MM 45.0 138.0 0.10 766 11.9 -0.3 -.- 29.9 -.- 12.4 0.3 ITC FHWA 95MM 45.0 138.0 10.00 1414 26.5 0.3 8.6 55.4 7.6 12.7 0.3 ITC FHWA 95MM 45.0 138.0 1.00 918 18.7 0.1 2.1 25.2 5.1 12.0 0.4 ITC FHWA 95MM 45.0 138.0 0.10 755 11.2 0.1 -.- 8.7 -.- 11.6 0.9 ITC FHWA 95MM 45.0 138.0 10.00 1486 29.1 0.5 6.6 127.5 8.4 4.8 0.2 ITC FHWA 95MM 45.0 138.0 1.00 886 20.7 0.0 2.1 39.9 4.8 8.4 0.4 ITC FHWA 95MM 45.0 138.0 0.10 655 13.9 0.0 -.- 9.6 -.- 13.8 0.0 ITC FHWA 95MM 45.0 138.0 10.00 1275 30.6 -0.1 7.2 66.3 8.1 10.7 1.4 ITC FHWA 95MM 45.0 138.0 1.00 843 20.4 0.0 2.1 20.9 4.3 7.9 0.3 ITC FHWA 95MM 45.0 138.0 0.10 731 12.6 0.1 -.- 14.0 -.- 7.1 0.1
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-16 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC FHWA 95MM 45.0 138.0 10.00 1528 27.7 0.2 6.2 96.5 8.4 0.5 1.4 ITC FHWA 95MM 45.0 138.0 1.00 960 19.7 0.0 2.0 36.9 5.0 5.1 1.8 ITC FHWA 95MM 45.0 138.0 0.10 852 12.1 0.1 -.- 22.4 -.- 1.8 0.2 ITC FHWA 19MM 25.0 0.0 10.00 11131 29.2 0.4 3.2 358.2 17.1 18.4 0.9 ITC FHWA 19MM 25.0 0.0 1.00 5446 32.3 0.1 0.4 314.4 11.1 13.8 0.9 ITC FHWA 19MM 25.0 0.0 0.10 2298 30.7 -0.2 -.- 185.7 -.- 18.5 1.4 ITC FHWA 19MM 25.0 0.0 10.00 12580 32.2 0.6 3.3 421.8 20.8 27.9 7.3 ITC FHWA 19MM 25.0 0.0 1.00 4684 30.5 0.0 0.7 317.1 10.6 30.4 7.0 ITC FHWA 19MM 25.0 0.0 0.10 1925 27.7 0.3 -.- 183.2 -.- 28.6 4.2 ITC FHWA 19MM 25.0 0.0 10.00 8442 27.4 0.7 3.4 255.2 13.9 20.5 6.6 ITC FHWA 19MM 25.0 0.0 1.00 4284 29.2 0.0 0.8 182.9 10.8 2.3 3.6 ITC FHWA 19MM 25.0 0.0 0.10 1733 27.8 0.6 -.- 61.9 -.- 5.8 1.7 ITC FHWA 19MM 25.0 0.0 10.00 9156 26.8 0.7 3.4 238.8 14.6 9.1 5.9 ITC FHWA 19MM 25.0 0.0 1.00 4431 29.2 0.0 0.8 167.3 8.3 3.9 3.1 ITC FHWA 19MM 25.0 0.0 0.10 1812 27.2 0.1 -.- 106.9 -.- 7.2 1.3 ITC FHWA 19MM 25.0 0.0 10.00 9136 30.0 0.7 3.5 319.9 15.2 30.5 6.2 ITC FHWA 19MM 25.0 0.0 1.00 4340 32.1 0.1 0.9 240.7 8.9 20.8 3.3 ITC FHWA 19MM 25.0 0.0 0.10 1792 30.6 -0.1 -.- 45.8 -.- 14.3 1.2 ITC FHWA 19MM 25.0 0.0 10.00 7832 24.9 0.5 3.5 280.1 12.1 9.6 2.3 ITC FHWA 19MM 25.0 0.0 1.00 4114 29.2 0.2 0.8 318.3 9.7 10.2 0.9 ITC FHWA 19MM 25.0 0.0 0.10 1980 29.3 -0.2 -.- 242.4 -.- 7.0 1.0 ITC FHWA 19MM 25.0 0.0 10.00 7936 26.5 0.6 3.3 296.8 11.4 21.8 4.0 ITC FHWA 19MM 25.0 0.0 1.00 4087 29.8 0.1 0.8 296.4 10.1 18.5 2.7 ITC FHWA 19MM 25.0 0.0 0.10 1867 30.1 -0.5 -.- 149.3 -.- 13.4 1.5 ITC FHWA 19MM 25.0 0.0 10.00 7918 26.7 0.9 3.8 306.4 15.0 12.4 2.9 ITC FHWA 19MM 25.0 0.0 1.00 4073 29.9 0.0 0.8 303.0 12.9 10.9 0.0 ITC FHWA 19MM 25.0 0.0 0.10 1780 29.5 0.5 -.- 129.3 -.- 18.9 2.1 ITC FHWA 19MM 45.0 0.0 10.00 1637 36.4 0.9 8.5 306.1 20.4 18.1 1.7 ITC FHWA 19MM 45.0 0.0 1.00 638 32.7 0.3 3.6 102.4 10.0 24.4 1.5 ITC FHWA 19MM 45.0 0.0 0.10 314 26.2 5.8 -.- 49.3 -.- 16.8 0.7 ITC FHWA 19MM 45.0 0.0 10.00 1729 33.1 0.0 7.7 202.2 12.6 4.6 1.3 ITC FHWA 19MM 45.0 0.0 1.00 798 26.4 0.1 2.6 105.6 8.6 5.0 0.5 ITC FHWA 19MM 45.0 0.0 0.10 462 18.9 -1.3 -.- 75.9 -.- 2.3 0.8 ITC FHWA 19MM 45.0 0.0 10.00 1418 33.6 -0.7 9.8 215.7 16.8 8.1 2.1 ITC FHWA 19MM 45.0 0.0 1.00 615 28.7 0.0 4.2 67.4 9.1 6.4 1.3 ITC FHWA 19MM 45.0 0.0 0.10 330 22.0 -1.9 -.- 18.6 -.- 1.9 1.2
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-17 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC FHWA 19MM 45.0 0.0 10.00 1683 33.8 0.3 5.2 91.2 10.0 5.9 1.3 ITC FHWA 19MM 45.0 0.0 1.00 756 25.3 0.2 2.6 23.6 5.9 4.1 0.1 ITC FHWA 19MM 45.0 0.0 0.10 490 17.3 -0.3 -.- -20.9 -.- 1.7 0.2 ITC FHWA 19MM 45.0 0.0 10.00 1683 31.8 1.2 9.1 299.2 13.7 14.5 2.9 ITC FHWA 19MM 45.0 0.0 1.00 740 26.9 0.2 1.6 48.6 6.8 6.2 0.4 ITC FHWA 19MM 45.0 0.0 0.10 377 22.0 0.5 -.- 8.8 -.- 26.9 0.9 ITC FHWA 19MM 45.0 0.0 10.00 1727 30.8 -0.1 8.6 202.0 13.5 19.6 0.7 ITC FHWA 19MM 45.0 0.0 1.00 759 28.5 0.0 3.1 92.0 8.4 23.8 1.3 ITC FHWA 19MM 45.0 0.0 0.10 358 23.5 1.8 -.- 54.2 -.- 26.6 0.3 ITC FHWA 19MM 45.0 0.0 10.00 1387 37.9 -0.3 8.2 175.2 17.4 3.7 3.3 ITC FHWA 19MM 45.0 0.0 1.00 566 30.7 0.1 2.5 38.2 7.9 2.3 0.2 ITC FHWA 19MM 45.0 0.0 0.10 303 23.3 -1.7 -.- -1.9 -.- 2.0 0.3 ITC FHWA 19MM 45.0 0.0 10.00 1775 36.5 0.2 7.9 231.8 16.4 11.0 2.2 ITC FHWA 19MM 45.0 0.0 1.00 754 28.9 0.1 2.2 104.3 9.3 19.4 1.1 ITC FHWA 19MM 45.0 0.0 0.10 384 22.6 -0.9 -.- 47.8 -.- 24.5 0.1 ITC FHWA 19MM 45.0 138.0 10.00 2612 29.7 0.6 4.6 134.3 9.4 23.2 1.0 ITC FHWA 19MM 45.0 138.0 1.00 1417 23.4 0.0 1.1 52.8 5.9 21.5 2.1 ITC FHWA 19MM 45.0 138.0 0.10 985 17.4 0.0 -.- 11.0 -.- 19.3 2.2 ITC FHWA 19MM 45.0 138.0 10.00 3025 31.1 0.9 7.5 160.0 12.9 21.4 0.2 ITC FHWA 19MM 45.0 138.0 1.00 1555 25.1 0.1 1.5 66.1 6.5 27.6 2.3 ITC FHWA 19MM 45.0 138.0 0.10 953 19.6 -0.1 -.- 22.6 -.- 28.3 2.6 ITC FHWA 19MM 45.0 138.0 10.00 2549 30.6 0.8 7.1 166.2 12.6 3.1 1.6 ITC FHWA 19MM 45.0 138.0 1.00 1303 23.6 0.1 1.7 67.2 7.8 4.4 1.7 ITC FHWA 19MM 45.0 138.0 0.10 815 17.3 -0.7 -.- 27.2 -.- 6.9 1.9 ITC FHWA 19MM 45.0 138.0 10.00 2391 29.1 0.1 6.4 90.1 10.9 13.1 3.8 ITC FHWA 19MM 45.0 138.0 1.00 1399 20.8 0.0 1.5 37.8 4.9 21.8 2.5 ITC FHWA 19MM 45.0 138.0 0.10 1038 14.9 0.0 -.- 12.5 -.- 26.7 1.4 ITC FHWA 19MM 45.0 138.0 10.00 2602 28.9 0.5 5.6 135.6 9.3 3.2 1.4 ITC FHWA 19MM 45.0 138.0 1.00 1435 22.8 0.1 1.1 51.7 6.6 2.2 2.1 ITC FHWA 19MM 45.0 138.0 0.10 982 17.0 0.5 -.- 11.7 -.- 7.3 1.7 ITC FHWA 19MM 45.0 138.0 10.00 2693 30.0 0.2 6.8 117.7 10.1 26.6 1.8 ITC FHWA 19MM 45.0 138.0 1.00 1501 24.0 0.1 1.4 59.0 6.1 28.6 3.3 ITC FHWA 19MM 45.0 138.0 0.10 1076 17.4 -0.6 -.- 28.2 -.- 26.3 2.9 ITC FHWA 19MM 45.0 138.0 10.00 2741 31.6 0.4 7.9 129.8 11.6 5.7 3.4 ITC FHWA 19MM 45.0 138.0 1.00 1333 24.5 0.3 1.7 49.4 7.3 8.7 3.8 ITC FHWA 19MM 45.0 138.0 0.10 862 17.9 0.0 -.- 17.1 -.- 9.9 2.3
TABLE C-1 Modulus and phase angle data and values for associated quality indices (continued) C-18 Device Lab Mix Type Nominal Temp. °C Nominal Confining Pressure KPa Freq. Hz Modulus MPa Phase Angle Deg. Load Drift % Load Standard Error % Deformation Drift % Deformation Standard Error % Deformation Uniformity % Phase Uniformity Deg. ITC FHWA 19MM 45.0 138.0 10.00 2317 31.2 0.2 8.0 123.8 10.5 6.0 0.1 ITC FHWA 19MM 45.0 138.0 1.00 1303 23.5 -0.1 1.8 59.8 5.6 13.7 2.1 ITC FHWA 19MM 45.0 138.0 0.10 922 17.5 -0.3 -.- 43.9 -.- 18.0 1.9
C-19 TABLE C-2 Flow number and strain at flow data Device Lab Mix Type Flow Number, Unconfined Strain at Flow, Unconfined % Flow Number, Confined Strain at Flow, Confined % IPC AAT 9.5MM 511 1.92 1331 2.59 IPC AAT 9.5MM 451 1.78 991 2.80 IPC AAT 9.5MM 451 1.33 1171 3.08 IPC AAT 9.5MM 451 1.70 1251 2.56 IPC AAT 9.5MM 390 1.61 1111 2.47 IPC AAT 9.5MM 431 1.68 1671 3.04 IPC AAT 9.5MM 471 1.67 1151 2.80 IPC AAT 9.5MM 751 2.09 1811 2.38 IPC AAT 19MM 2111 0.99 4571 1.23 IPC AAT 19MM 1491 1.02 3751 1.54 IPC AAT 19MM 1311 0.80 2591 1.46 IPC AAT 19MM 931 0.98 4911 1.89 IPC AAT 19MM 1511 1.04 2831 1.26 IPC AAT 19MM 1131 0.94 6531 1.23 IPC AAT 19MM 1811 0.86 2711 1.38 IPC AAT 19MM 1571 1.07 2751 1.30 IPC FHWA 9.5MM 897 1.81 1811 3.46 IPC FHWA 9.5MM 631 1.96 1411 2.53 IPC FHWA 9.5MM 711 2.14 1471 3.31 IPC FHWA 9.5MM 951 2.08 1271 2.87 IPC FHWA 9.5MM 691 2.16 1551 3.00 IPC FHWA 9.5MM 631 1.70 1431 3.36 IPC FHWA 9.5MM 791 1.97 1791 3.08 IPC FHWA 9.5MM ---. 2.26 1431 2.42 IPC FHWA 19MM 2751 0.75 2191 2.01 IPC FHWA 19MM 1071 1.33 3051 1.55 IPC FHWA 19MM 1051 1.11 4971 1.79 IPC FHWA 19MM 2111 0.80 1931 1.58 IPC FHWA 19MM 1191 1.36 1431 1.75 IPC FHWA 19MM 1451 1.05 2471 1.60 IPC FHWA 19MM 951 1.07 1691 1.54 IPC FHWA 19MM 1151 1.10 3451 1.77 ITC AAT 9.5MM 677 1.95 2300 3.70 ITC AAT 9.5MM 876 1.95 1613 2.88 ITC AAT 9.5MM 522 1.90 1700 3.60 ITC AAT 9.5MM 611 1.96 2604 3.48
C-20 TABLE C-2 Flow number and strain at flow data (continued) Device Lab Mix Type Flow Number, Unconfined Strain at Flow, Unconfined % Flow Number, Confined Strain at Flow, Confined % ITC AAT 9.5MM 634 2.04 1733 3.80 ITC AAT 9.5MM 533 1.88 2627 3.80 ITC AAT 9.5MM 564 2.03 2440 4.00 ITC AAT 9.5MM 773 2.07 2490 4.06 ITC AAT 19MM 934 1.05 1629 1.18 ITC AAT 19MM 1662 0.76 3434 2.23 ITC AAT 19MM 1103 1.00 4352 2.02 ITC AAT 19MM 596 1.10 2087 2.28 ITC AAT 19MM 1022 1.25 5743 1.90 ITC AAT 19MM 819 1.11 6448 1.70 ITC AAT 19MM 1390 1.30 856 1.10 ITC AAT 19MM 693 1.30 4427 2.45 ITC FHWA 9.5MM 629 2.05 2821 4.40 ITC FHWA 9.5MM 372 1.82 2148 3.40 ITC FHWA 9.5MM 452 1.58 2836 3.96 ITC FHWA 9.5MM 701 2.14 2210 4.22 ITC FHWA 9.5MM 479 1.62 2469 4.00 ITC FHWA 9.5MM 458 1.94 1837 3.71 ITC FHWA 9.5MM 621 1.92 2474 3.91 ITC FHWA 9.5MM 505 1.94 2364 3.81 ITC FHWA 19MM 1557 0.87 4730 1.42 ITC FHWA 19MM 1446 0.96 2204 1.34 ITC FHWA 19MM 943 0.98 4672 1.89 ITC FHWA 19MM 1587 0.99 >10000 0.00 ITC FHWA 19MM 1722 1.24 3066 1.79 ITC FHWA 19MM 847 0.99 2591 1.48 ITC FHWA 19MM 831 0.94 5360 1.38 ITC FHWA 19MM 912 0.93 5778 2.45
