Properties of Foamed Asphalt for Warm Mix Asphalt Applications (2015)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

78 Abbas, A. and A. Ali. 2011. Mechanical Properties of Warm Mix Asphalt Prepared Using Foamed Asphalt Binders. Report No. FHWA/ OH-2011/6. Ohio Department of Transportation, Columbus. Abbas, A., M. Nazzal, S. Sargand, A. Ali, A. Roy, and A. Alhasan. 2013. Deter- mining the Limitations of Warm Mix Asphalt by Water Injection in Mix Design, Quality Control and Placement. Report No. FHWA/ OH-2013/9. Ohio Department of Transportation, Columbus. Abel, F. 1978. Foamed Asphalt Base Stabilization. Proceedings. 6th Annual Asphalt Paving Seminar. Colorado State University, Loveland. Abel, F. and C. R. Hines. 1979. Base Stabilization with Foamed Asphalt. Interim Report, Colorado Department of Transportation, Denver, CO. Adamson, A. W. and A. P. Gast. 1997. Physical Chemistry of Surfaces. John Wiley & Sons, Inc., New York. Allosta, A. A., W. A. Zeiada, and K. Kaloush. 2011. Evaluation of Warm Mix Asphalt Versus Conventional Hot Mix Asphalt for Field And Laboratory-Compacted Specimens. Proceedings. 2nd Int’l Conf on Warm Mix Asphalt. National Asphalt Pavement Association, Lanham, MD. Accessed Oct. 22, 2011. Andrés-Lacueva, C., E. López-Tamames, R. M. Lamuela-Raventós, S. Buxaderas, and M. del C. de la Torre-Boronat. 1996. Character- istics of Sparkling Base Wines Affecting Foam Behavior. Journal of Agricultural and Food Chemistry, 44(4), 989–995. Arzhavitina, A. and H. Steckel. 2010. Foams for Pharmaceutical and Cosmetic Application. International Journal of Pharmaceutics, 394 (1–2), 1–17. Berthier, J. 2008. Microdrops and Digital Microfluidics. William Andrew Publishing. Bhasin, A., J. E., Howson, E. Masad, D. N. Little, and R. L. Lytton. 2007. Effect of Modification Processes on Bond Energy of Binders. Trans- portation Research Record: Journal of the Transportation Research Board, No. 1998, 29–37, Transportation Research Board of the National Academies, Washington, D.C. Bistor, B. 2008. Florida Contractor Uses Warm Mix in Challenging Applications. Warm Mix Asphalt: Contractors’ Experiences. IS 134. National Asphalt Pavement Association, Lanham, MD. pp. 18–19. Bowering, R. H. and C. L. Martin. 1976. Foamed Bitumen Production and Application of Mixtures, Evaluation and Performance of Pave- ments. Proceedings. Association of Asphalt Paving Technologists. Vol. 45. Lino Lakes, MN. pp. 453–477. Brennen, M., M. Tia, A. G. Altschaeffl, and L. E. Wood. 1983. Laboratory Investigation of the Use of Foamed Asphalt for Recycled Bitumi- nous Pavements. Transportation Research Record 911. TRB, National Research Council, Washington, D.C. pp. 80–87. Button, J. W., C. Estakhri, and A. Wimsatt. 2007. A Synthesis of Warm- Mix Asphalt. College Station, Texas Transportation Institute, College Station, Texas. Castedo, F. L. H. and L. E. Wood. 1983. Stabilization with Foamed Asphalt of Aggregates Commonly Used in Low-Volume Roads. Transportation Research Record 898. TRB, National Research Coun- cil, Washington, D.C. Clark, T. M. and T. M. Rorrer. 2011. Rapid Implementation of WMA in Virginia. Proceedings. 2nd Int’l Conf on Warm Mix Asphalt. National Asphalt Pavement Association, Lanham, MD. www.asphalt pavement.org. Accessed Oct. 22, 2011. Csanyi, L. H. 1957. Foamed Asphalt in Bituminous Pavements. Highway Research Record 160. Highway Research Board. Washington, D.C. pp. 108–122. D’Angelo, J., E. Harm, J. Bartoszek, G. Baumgardner, M. Corrigan, J. Cowsert, T. Harman, M. Jamshidi, W. Jones, D. Newcomb, B. Prowell, R. Sines, and B. Yeaton. 2008. Warm-Mix Asphalt: Euro- pean Practice. Report No. FHWA-PL-08-007. Federal Highway Administration. Washington, D.C. De Sombre, R., D. Newcomb, B. Chadbourn, and V. Voller. 1998. Param- eters to Define the Laboratory Compaction Temperature Range of Hot-Mix Asphalt. Paving Technology. Vol. 67. Assn. of Asphalt Paving Technologists, Lino Lakes, MN. pp. 125–142. Engelbrecht, D. C. 1999. Manufacturing Foam Bitumen in a Standard Drum Mixing Asphalt Plant. 7th Conference on Asphalt Pavements for Southern Africa, South Africa. FHWA. 2008. Highway Statistics. Retrieved January 6, 2010, from http:// www.fhwa.dot.gov/policyinformation/statistics/2008/. Fort, J.-P., G. Graham, J. Farnham, S. Sinn, and G. M. Rowe. 2011. I-55/I-57 Warm Mix Project in Missouri Contractor’s WMA Experience. Pro- ceedings. 2nd Int’l Conf on Warm Mix Asphalt. National Asphalt Pavement Association, Lanham, MD. www.asphaltpavement.org. Accessed Oct. 22, 2011. Fu, P. 2011. Foamed Asphalt 101. http://foam101.info/Science/Asphalt. html Sustainable Transportation Center. University of California Davis. Accessed December 5, 2011. Fu, P., D. Jones, and J. T. Harvey. 2011. The Effects of Binder and Granular Material Characteristics on Foamed Asphalt Mix Strength. Construc- tion and Building Materials, 25(2), 1093–1101. Gallart, M., E. López-Tamames, and S. Buxaderas. 1997. Foam Mea- surements in Wines? Comparison of Parameters Obtained by Gas Sparging Method. Journal of Agricultural and Food Chemistry, 45(12), 4687–4690. References

79 German, J., T. O’Neill, and J. Kinsella. 1985. Film Forming and Foaming Behavior of Food Proteins. Journal of the American Oil Chemists’ Society, 62(9), 1358–1366. Hajj, E. Y., C. Chia, P. E. Sebaaly, A. M. Kasozi, and S. Gibson. 2011. Properties of Foamed Warm-Mix Asphalt Incorporating Recycled Asphalt Pavement from Two Field Projects—Case Studies. Pro- ceedings. 2nd Int’l Conf on Warm Mix Asphalt. National Asphalt Pavement Association, Lanham, MD. www.asphaltpavement.org. Accessed Oct. 22, 2011. Hailisilassie, B., P. Schuetz, I. Jergen, A. Bieder, M. Hugener, and M. N. Partl. 2014. Evolution of Bubble Size Distribution During Foam Bitumen Formation and Decay. Presentation in Session W-1-D. International Conference on Asphalt Pavements. International Society for Asphalt Pavements, Raleigh, North Carolina. Hansen, K. and A. Copeland. April 2013. 2nd Annual Asphalt Pavement Industry Survey on Reclaimed Asphalt Pavement, Reclaimed Asphalt Shingles, and Warm-Mix Asphalt Usage: 2009–2011. Information Series 138. National Asphalt Pavement Association, Lanham, MD. Harder, G. A., Y. LeGoff, A. Loustou, Y. Martineau, B. Heritier, and A. Romier. 2008. Energy and Environmental Gains of Warm and Half- Warm Asphalt Mix: Quantitative Approach. TRB 87th Annual Meet- ing Compendium of Papers. DVD. Transportation Research Board of the National Academies, Washington, D.C. He, G. and W. Wong. 2006. Decay Properties of the Foamed Bitumens. Construction and Building Materials, 20(10), 866–877. Huang, X. L., G. L. Catignani, and H. E. Swaisgood. 1997. Micro-Scale Method for Determining Foaming Properties of Protein. Journal of Food Science, 62(5), 1028–1060. Hurley, G. C. and B. Prowell. 2005. Evaluation of Aspha-Min Zeolite for Use in Warm Mix Asphalt. National Center for Asphalt Technology, Auburn, AL. Jenkins, K. J. 2000. Mix Design Considerations for Cold and Half-Warm Bituminous Mixes with Emphasis on Foamed Bitumen. Doctoral Dissertation, University of Stellenbosch, South Africa. Jenkins, K. J., A. A. A. Molenaar, J. L. A. de Groot, and M. F. C. van de Ven. 2002. Foamed Asphalt Produced Using Warmed Aggregates. Journal of the Association of Asphalt Paving Technologists 71: 444–478. Jones, W. 2004. Warm Mix Asphalt Pavements: Technology of the Future? Asphalt. The Asphalt Institute. Lexington, KY. pp. 8–11. Kandhal, P. S., K. Y. Foo, and R. B. Mallick. 1988. A Critical Review of VMA Requirements in Superpave. NCAT Report No. 98-1. Kealy, T., A. Abram, B. Hunt, and R. Buchta. 2008. The Rheological Prop- erties of Pharmaceutical Foam: Implications for Use. International Journal of Pharmaceutics, 355(1-2), 67–80. Kekevi, N., H. Berber, and H. Yildirim. 2012. Synthesis and Characteriza- tion of Silicone-Based Surfactants as Anti-Foaming Agents. J Surfact Deterg, Springer, 15:73–81. Kim, Y. and W. Li. 2011. Modeling of a Subcritical CO2 Microcellular Extrusion Process. North American Manufacturing Research Con- ference, Corvallis, Oregon. Klempner, D., V. Sendijarevic, and R. M. Aseeva. 2004. Polymeric Foams and Foam Technology. Hanser Verlag. Koehler, S. A., H. A. Stone, M. P. Brenner, and J. Eggers. 1998. Dynamics of Foam Drainage. Physical Review E, 58(2), 2097–2106. Koenders, B. G., D. A. Stoker, C. Robertus, O. Larsen, and J. Johansen. 2002. WAM-Foam, Asphalt Production at Lower Operating Temper- atures. Proceedings. 9th International Conference on Asphalt Pave- ments, Copenhagen, Denmark, International Society for Asphalt Pavements. Kristjansdottir, O. 2006. Warm Mix Asphalt for Cold Weather Paving. M. S. Thesis. Civil Engineering. Seattle, University of Washington. Kuennen, T. 2004. Warm Mixes Are a Hot Topic. Better Roads. 74-6. James Informational Media. Des Plaines, IA. Leibson, I., E. G. Holcomb, A. G. Cacoso, and J. J. Jacmic. 1956. Rate of Flow and Mechanics of Bubble Formation from Single Submerged Orifices. II. Mechanics of Bubble Formation. AIChE Journal, 2(3), 300–306. Muthen, K. M. 1998. Foamed Asphalt Mixes—Mix Design Procedure. Report No. CR-98/077. CSIR Transportek. Pretoria. McKenzie, P. 2006. Taking a Closer Look at Warm Mix. Better Roads. 74-6. James Informational Media, Des Plaines, IA. Namutebi, M. 2011. Some Aspects of Foamed Bitumen Technology. Dissertation, KTH. Namutebi, M., B. Birgisson, and U. Bagampadde. 2011. Foaming Effects on Binder Chemistry and Aggregate Coatability Using Foamed Bitu- men. Road Materials and Pavement Design. 12:4. Taylor and Francis. pp. 821–847. National Asphalt Pavement Association (NAPA). 2010. Asphalt Industry Update and Overview. Retrieved January 6, 2010, from http://www. hotmix.org/index.php?option=com_content&task=view&id=14& Itemid=33. National Center for Asphalt Technology (NCAT). 2005. NCAT Evaluates Warm Mix Asphalt. Asphalt Technology News. Vol. 17, No.2. Auburn University. pp. 1–5. Nazzal, M. D., S. Sargand, D. Powers, E. P. Morrison, and A. Al-Rawashdeh. 2011. Evaluation of Fine Graded Polymer Asphalt Mixture Pro- duced Using Foamed Warm Mix Asphalt Technology. Proceedings. 2nd Int’l Conf on Warm Mix Asphalt. National Asphalt Pavement Association, Lanham, MD. www.asphaltpavements.org. Accessed October 6, 2011. Newcomb, D. 2005a. Warm Mix Asphalt: Wave of the Future. HMAT. July/August. National Asphalt Pavement Association, Lanham, MD. Newcomb, D. 2005b. Warm Mix Asphalt. Retrieved January 6, 2010, from http://cms.transportation.org/sites/construction/docs/Newcomb %20-%20Warm%20Mix%20Asphalt.pdf. Ozturk, H. I. and M. Kutay. 2014a. Effect of Foamed Binder Char- acteristics on Warm Mix Asphalt (WMA) Performance. Paper No. 14-3953. TRB 93rd Annual Meeting Compendium of Papers. CD-ROM. Transportation Research Board of the National Acade- mies, Washington, D.C. Ozturk, H. I. and M. Kutay. 2014b. Sensitivity of Nozzle–Based Foamed Asphalt Binder Characteristics to Foaming Parameters. Paper No. 14-3961. TRB 93rd Annual Meeting Compendium of Papers. CD-ROM. Transportation Research Board of the National Academies, Washington, D.C. Pellicer, J., V. García-Morales, and M. J. Hernández. 2000. On the Dem- onstration of the Young-Laplace Equation in Introductory Physics Courses. Physics Education, 35(2), 126. Phillips, L. G., Z. Haque, and J. E. Kinsella. 1987. A Method for the Mea- surement of Foam Formation and Stability. Journal of Food Science, 52(4), 1074–1077. Prowell, B., G. C. Hurley, and B. Frank. 2011a. Warm Mix Asphalt: Best Practices. QIS 125. 2nd Edition. National Asphalt Pavement Asso- ciation, Lanham, MD. Prowell, B., R. J. Schreck, and S. Sasaki. 2011b. Evaluation of the Benefits of Foamed Asphalt Mixtures at Varying Production Temperatures. Proceedings. 2nd Int’l Conf on Warm Mix Asphalt. National Asphalt Pavement Association, Lanham, MD. www.asphaltpavement.org. Accessed Oct. 22, 2011. Pugh, R. J. 2005. Experimental Techniques for Studying the Structure of Foams and Froths. Advances in Colloid and Interface Science, 114–115, 239–251.

80 Raymundo, A., J. Empis, and I. Sousa. 1998. Method to Evaluate Foaming Performance. Journal of Food Engineering, 36(4), 445–452. Romier, A., M. Audeon, J. David, Y. Martineau, and F. Olard. 2006. Low- Energy Asphalt with Performance of Hot-Mix Asphalt. Transporta- tion Research Record: Journal of the Transportation Research Board, No. 1962. Transportation Research Board of the National Academies, Washington, D.C. pp. 101–112. Sakr, H. A. and P. G. Manke. 1985. Innovations in Oklahoma Foamix Design Procedures. Transportation Research Record 1034. TRB, National Research Council, Washington, D.C. pp. 26–34. Saye, R. I. and J. A. Sethian. 2013. Multiscale Modeling of Membrane Rearrangement, Drainage, and Rupture in Evolving Foams. Science, 340(6133), 720–724. Schick, C. 2004. A Mathematical Analysis of Foam Films. Doctoral Dis- sertation, Kaiserslautern University of Technology, Kaiserslautern, Germany. Schramm, L. L. 1994. Foam Stability in the Presence of Crude Oil. Foams: Fundamentals and Applications in the Petroleum Industry. Schramm, L. L., ed. Advances in Chemistry Series No. 242. American Chemical Society. pp. 165–197. Stroup-Gardiner, M., C. R. Lange, and A. Carter. 2005. Quantification of Emission Potential from Binders Using Mass Loss and Opacity Measurements. International Journal of Pavement Engineering, 6 (3): 191–200. Sunarjono, S. I. 2008. Influence of Foamed Bitumen Characteristics on Cold Mix Asphalt Properties. Ph.D. Dissertation. University of Nottingham. England. Uhlig, H. H. 1937. The Solubilities of Gases and Surface Tension. J Phys Chem 41:1215–1225. Ursich, C. 2008. Flexible Pavements of Ohio Helps Industry Get a Closer Look at Warm Mix. Warm Mix Asphalt: Contractors’ Experiences. IS 134. National Asphalt Pavement Association, Lanham, MD. pp. 14–16. Velasquez, R., G. Cuciniello, D. Swiertz, R. Bonaquist, and H. Bahia. 2010. Methods to Evaluate Aggregate Coating for Asphalt Mixtures Produced at WMA Temperatures. Canadian Technical Asphalt Association Proceedings. Wang, H. and W. Li. 2008. Selective Ultrasonic Foaming of Polymer for Biomedical Applications. ASME Transaction Journal of Manufactur- ing Science and Engineering, Vol. 130, No. 2, pp. 021004-1-021004-9. Wilde, P. J. 1996. Foam Measurement by the Microconductivity Technique: An Assessment of Its Sensitivity to Interfacial and Environmental Factors. Journal of Colloid and Interface Science, 178(2), pp.733–739. Xu, J. 2010. Microcellular Injection Molding. Wiley Series on Polymer Engineering and Technology. R. F. Grossman and D. Nwabunma, ed. John Wiley and Sons, Inc. Yin, F., E. Arambula, R. Lytton, A. Epps Martin, and L. Garcia Cucalon. 2014. Novel Method to Evaluate Moisture Susceptibility and Rutting Resistance of Asphalt Mixtures Using the Hamburg Wheel Track- ing Test. Transportation Research Record: Journal of the Transporta- tion Research Board, No. 2446. Transportation Research Board of the National Academies, Washington, D.C. pp. 1–7. Zettler, R. 2006. Warm Mix Stands Up to Its Trials. Better Roads. 76-2. James Informational Media. Des Plaines, IA.