Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
TRANSPORTATION RESEARCH BOARD WASHINGTON, D.C. 2015 www.TRB.org The Second S T R A T E G I C H I G H W A Y R E S E A R C H P R O G R A M REPORT S2-R01A-RW-1 Technologies to Support Storage, Retrieval, and Use of 3-D Utility Location Data William Gale and andreW HammerscHmidt Gas Technology Institute Des Plaines, Illinois
Subject Areas Construction Data and Information Technology Highways
The Second Strategic Highway Research Program Americaâs highway system is critical to meeting the mobility and economic needs of local communities, regions, and the nation. Developments in research and technologyâsuch as advanced materials, communications technology, new data collection tech- nologies, and human factors scienceâoffer a new opportunity to improve the safety and reliability of this important national resource. Breakthrough resolution of significant transportation problems, however, requires concentrated resources over a short time frame. Reflecting this need, the second Strategic Highway Research Program (SHRP 2) has an intense, large-scale focus, integrates multiple fields of research and technology, and is fundamentally different from the broad, mission-oriented, discipline-based research programs that have been the mainstay of the highway research industry for half a century. The need for SHRP 2 was identified in TRB Special Report 260: Strategic Highway Research: Saving Lives, Reducing Congestion, Improving Quality of Life, published in 2001 and based on a study sponsored by Congress through the Transportation Equity Act for the 21st Century (TEA-21). SHRP 2, modeled after the first Strategic Highway Research Program, is a focused, time- constrained, management-driven program designed to com- plement existing highway research programs. SHRP 2 focuses on applied research in four areas: Safety, to prevent or reduce the severity of highway crashes by understanding driver behavior; Renewal, to address the aging infrastructure through rapid design and construction methods that cause minimal disruptions and produce lasting facilities; Reliability, to reduce congestion through incident reduction, management, response, and mitigation; and Capacity, to integrate mobility, economic, environmental, and community needs in the planning and designing of new trans- portation capacity. SHRP 2 was authorized in August 2005 as part of the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU). The program is managed by the Transportation Research Board (TRB) on behalf of the National Research Council (NRC). SHRP 2 is conducted under a memo- randum of understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Federal Highway Administration (FHWA), and the National Academy of Sciences, parent organization of TRB and NRC. The program provides for competitive, merit-based selection of research contractors; independent research project oversight; and dissemination of research results. SHRP 2 Reports Available by subscription and through the TRB online bookstore: www.mytrb.org/store Contact the TRB Business Office: 202-334-3213 More information about SHRP 2: www.TRB.org/SHRP2 SHRP 2 Report S2-R01A-RW-1 ISBN: 978-0-309-27459-3 © 2015 National Academy of Sciences. All rights reserved. Copyright Information Authors herein are responsible for the authenticity of their materials and for obtaining written permissions from publishers or persons who own the copy- right to any previously published or copyrighted material used herein. The second Strategic Highway Research Program grants permission to repro- duce material in this publication for classroom and not-for-profit purposes. Permission is given with the understanding that none of the material will be used to imply TRB, AASHTO, or FHWA endorsement of a particular prod- uct, method, or practice. It is expected that those reproducing material in this document for educational and not-for-profit purposes will give appropriate acknowledgment of the source of any reprinted or reproduced material. For other uses of the material, request permission from SHRP 2. Note: SHRP 2 report numbers convey the program, focus area, project number, and publication format. Report numbers ending in âwâ are published as web documents only. Notice The project that is the subject of this report was a part of the second Strategic Highway Research Program, conducted by the Transportation Research Board with the approval of the Governing Board of the National Research Council. The members of the technical committee selected to monitor this project and review this report were chosen for their special competencies and with regard for appropriate balance. The report was reviewed by the technical committee and accepted for publication according to procedures established and overseen by the Transportation Research Board and approved by the Governing Board of the National Research Council. The opinions and conclusions expressed or implied in this report are those of the researchers who performed the research and are not necessarily those of the Transportation Research Board, the National Research Council, or the program sponsors. The Transportation Research Board of the National Academies, the National Research Council, and the sponsors of the second Strategic Highway Research Program do not endorse products or manufacturers. Trade or manufacturersâ names appear herein solely because they are considered essential to the object of the report.
The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare. On the authority of the charter granted to it by Congress in 1863, the Academy has a mandate that requires it to advise the federal government on scientific and technical matters. Dr. Ralph J. Cicerone is president of the National Academy of Sciences. The National Academy of Engineering was established in 1964, under the charter of the National Academy of Sciences, as a parallel organization of outstanding engineers. It is autonomous in its administration and in the selection of its members, sharing with the National Academy of Sciences the responsibility for advising the federal government. The National Academy of Engineering also sponsors engineering programs aimed at meeting national needs, encourages education and research, and recognizes the superior achieve- ments of engineers. Dr. C. D. (Dan) Mote, Jr., is president of the National Academy of Engineering. The Institute of Medicine was established in 1970 by the National Academy of Sciences to secure the services of eminent members of appropriate professions in the examination of policy matters pertaining to the health of the public. The Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government and, on its own initiative, to identify issues of medical care, research, and education. Dr. Victor J. Dzau is president of the Institute of Medicine. The National Research Council was organized by the National Academy of Sciences in 1916 to associate the broad community of science and technology with the Academyâs purposes of furthering knowledge and advising the federal government. Functioning in accordance with general policies determined by the Academy, the Council has become the principal operating agency of both the National Academy of Sciences and the National Academy of Engineering in providing services to the government, the public, and the scientific and engineering communities. The Council is administered jointly by both Academies and the Institute of Medicine. Dr. Ralph J. Cicerone and Dr. C. D. (Dan) Mote, Jr., are chair and vice chair, respectively, of the National Research Council. The Transportation Research Board is one of six major divisions of the National Research Council. The mission of the Transportation Research Board is to provide leadership in transportation innovation and progress through research and information exchange, conducted within a setting that is objective, interdisci- plinary, and multimodal. The Boardâs varied activities annually engage about 7,000 engineers, scientists, and other transportation researchers and practitioners from the public and private sectors and academia, all of whom contribute their expertise in the public interest. The program is supported by state transportation departments, federal agencies including the component administrations of the U.S. Department of Transporta- tion, and other organizations and individuals interested in the development of transportation. www.TRB.org www.national-academies.org
ACKNOWLEDGMENTS This work was sponsored by the Federal Highway Administration in cooperation with the American Associa- tion of State Highway and Transportation Officials. It was conducted in the second Strategic Highway Research Program (SHRP 2), which is administered by the Transportation Research Board of the National Academies. The project was managed by Charles Taylor, Special Consultant for SHRP 2 Renewal; James Bryant, Senior Program Officer for SHRP 2 Renewal; and Andy Horosko, Special Consultant for SHRP 2 Renewal. Ralph Hessian, Special Consultant for SHRP 2 Renewal, also contributed to this report. The research reported on herein was performed by Gas Technology Institute, Inc. (GTI), supported by Bentley Systems Incorporated, J. H. Anspach Consulting, Sentinel Inc., and GL Industrial Services. William Gale, GTI Senior Engineer, was the principal investigator. Andrew Hammerschmidt, GTI R&D Director, was the project manager. The other authors of this report include the Bentley Systems Incorporated team, led by Dennis Pettit. The authors would like to thank the Virginia Department of Transportation and Maryland Department of Transportation for their contributions to this research. SHRP 2 STAFF Ann M. Brach, Director Stephen J. Andrle, Deputy Director Cynthia Allen, Editor Kenneth Campbell, Chief Program Officer, Safety Jared Cazel, Editorial Assistant JoAnn Coleman, Senior Program Assistant, Capacity and Reliability Eduardo Cusicanqui, Financial Officer Richard Deering, Special Consultant, Safety Data Phase 1 Planning Shantia Douglas, Senior Financial Assistant Charles Fay, Senior Program Officer, Safety Carol Ford, Senior Program Assistant, Renewal and Safety James Hedlund, Special Consultant, Safety Coordination Alyssa Hernandez, Reports Coordinator Ralph Hessian, Special Consultant, Capacity and Reliability Andy Horosko, Special Consultant, Safety Field Data Collection William Hyman, Senior Program Officer, Reliability Linda Mason, Communications Officer David Plazak, Senior Program Officer, Capacity and Reliability Rachel Taylor, Senior Editorial Assistant Dean Trackman, Managing Editor Connie Woldu, Administrative Coordinator
This report documents 3-D utility location literature and project review findings, the devel- opment of a nonproprietary 3-D utility location data repository, and the use of the reposi- tory in a pilot demonstration using actual utility location data from a road renewal project. The report will be of interest to engineers and others exploring ways to enhance practices for capturing, storing, using, and maintaining 3-D utility information, as well as to software vendors of road planning, design, and construction software products. Underground utility installations are common within highway rights-of-way. The location and specific characteristics of many buried utility lines have not been properly documented and thus present a unique challenge for highway renewal projects. The discovery of unexpected util- ity lines during a projectâs delivery can pose considerable risk to workersâ safety and disrupt the established project schedule. Highway renewal projects depend on the availability of accurate underground utility records and information to support effective planning, design, and delivery. Providing the necessary underground utility information for road renewal projects requires a suite of innovative nondestructive technologies and methods and a decision support frame- work that can address the complexity of varying utilities, site soil, geology, and environmen- tal conditions. SHRP 2 Project R01, Encouraging Innovation in Locating and Characterizing Underground Utilities, provided the background and basis for a series of research and devel- opment projects that aimed to provide products to serve this highway renewal business need. This report presents information on a project undertaken to use 3-D utility location information for planning, design, and construction of highway renewal work and to develop long-term storage of the 3-D utility location information for use on future projects. Infor- mation on current practices and protocols for addressing aboveground and belowground utility location data was assembled from a domestic and international literature search and a review of a number of selected projects. These findings, together with input from a workshop, the expertise of the project team, and the knowledge of current commercially available technologies and software, were used to develop a framework of policies, procedures, and systems to store, retrieve, and use 3-D utility location data in highway renewal projects. Brief commentary is provided on concep- tual workflows and software, system, and administrative needs. A 3-D utility location data repository was developed to support the project. The reposi- tory, developed on a standard relational database product, was based on the federal Spatial Data Standards for Facilities, Infrastructure, and Environment database (SDSFIE 3.0). For this project, the SDSFIE data model was modified and extended to add additional features, to provide a richer set of definitions, and to permit 3-D spatial features storage. The reposi- tory can be used to support planning, design, and construction activity, as well as to store 3-D utility location information for future highway renewal projects. A limited pilot demonstration using the 3-D utility location data repository and com- monly available software tools is documented. The demonstration using right-of-way utility information from a state highway renewal project discusses the uploading, using, updating, and storing of 3-D utility location data. F O R EWO R D Andy Horosko and Ralph Hessian, SHRP 2 Special Consultants, Renewal
C O N T E N T S 1 Executive Summary 5 CHAPTER 1 Background 5 Project Background 5 Research Objective 5 Scope of Study 7 CHAPTER 2 Literature Search and Information Gathering 7 List of Projects and Papers 7 Projects Reviewed 8 Papers Reviewed 9 Findings from Literature Search and Information Gathering 10 CHAPTER 3 Solution Framework 10 Approach and Process 10 Workshop 10 Key Challenges 11 Proposed Framework and Conceptual Workflow 15 Data and Administrative Issues 18 CHAPTER 4 3-D Data Model and Data Repository 18 Data Model Organization 18 Reproducing the Prototype 3-D Utility Data Repository 21 CHAPTER 5 Proof-of-Concept Pilot Demonstration 21 System and Process 23 Working with the Model 41 CHAPTER 6 Conclusions and Recommendations 41 Recommendations 42 Conclusions 43 References 44 Appendix A. Data Schema 192 Appendix B. Oracle Spatial DDL