Skip to main content

Adhesive Anchors in Concrete Under Sustained Loading Conditions (2009) / Chapter Skim
Currently Skimming:


Pages 66-67

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 66...
... 66 The objective of this research project was to develop a draft AASHTO standard test method to determine the ability of adhesive anchors to resist sustained tension load. The draft AASHTO test standard developed for this project is based on developing a stress versus time-to-failure interaction diagram for individual adhesive products.
Read the entire page →
From page 67...
... • The static load tests are to be conducted at an elevated temperature of 110°F. • All tests are to be conducted at a controlled humidity below 40%.
Read the entire page →

Key Terms



This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More information on Chapter Skim is available.