Pavement Markings--Design and Typical Layout Details (2006) / Chapter Skim
Currently Skimming:
Appendix L - Two-Way Left-Turn Lanes
Appendix L - Two-Way Left-Turn Lanes
Pages 107-110
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 107... ...
If the ADT of the roadway is less than 10,000, the maximum interval between sets of arrows is 500 ft. Sets of arrows should be placed such that the tip of the nearest arrowhead is no closer than 50 ft to the nearest edge of an intersecting street.
|
From page 108... ...
. A set of arrows shall be placed on each approach to all intersecting streets at a distance of 50 ft from the beginning of the centerline markings.
|
From page 109... ...
If used, the spacing between the tips of the arrowheads is typically 33 ft. If turn arrows are used, the maximum interval (measured between the tips of the arrowheads of the nearest arrows)
|
From page 110... ...
. No standards were found for: Alaska Rhode Island Connecticut South Carolina Hawaii Vermont Kentucky Virginia Maine District of Columbia Massachusetts Puerto Rico Missouri Los Angeles, CA New Jersey New York, NY New Mexico Tucson/Pima County, AZ North Dakota
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.