Skip to main content

Pavement Markings--Design and Typical Layout Details (2006) / Chapter Skim
Currently Skimming:

Appendix E - Lane Lines for Dual Turn Lanes
Pages 87-89

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 87...
... These solid 4-in.-wide lane lines start at the point where the full width first becomes available for the two turn lanes. Lane line extensions are dotted lines (2-ft segments with 4-ft gaps)
Read the entire page →
From page 88...
... NEW YORK The lane line between the two turn lanes may be extended through the intersection using a 4-in.-wide dotted line. A dotted line is typically comprised of 2-ft segments with 4-ft gaps.
Read the entire page →
From page 89...
... The lane line between the two turn lanes is extended through the intersection using a 4-in.-wide dotted line (2-ft segments with 6-ft gaps)
Read the entire page →

Key Terms

  • intersection using
  • dotted line
  • solid lane
  • stop line
  • line extensions

  • wide solid
  • lane lines
  • dotted lines
  • solid line
  • lines start

  • line starts
  • opposing directions
  • lane taper
  • lane starts
  • dotted lane

  • wide lane
  • puerto rico
  • line extended
  • wide dotted
  • line extension

  • north dakota
  • cles exceeds
  • extensions typically
  • edge line
  • west virginia

  • rhode island
  • line separating
  • cross street
  • broken lane
  • typically comprised


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.