Skip to main content

Alternatives for Inspecting Outer Continental Shelf Operations (1990) / Chapter Skim
Currently Skimming:

Appendix H: Commentary on United Kingdom and Norwegian Inspection Requirements
Pages 108-111

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 108...
... While both countries are faced with similar situations they have elected different approaches to operational safety inspection due, in part, to their societal differences as well as to the manner in which the offshore industry developed in the two countries. UNITED KINGDOM In the U.K system, independent certifying agencies approved by the Department of Energy carry out most of the certification and inspection functions.
Read the entire page →
From page 109...
... 2.2.1.2 Sample checks should be made of equipotential bonding conductors to verify the earth continuity path. Electrical equipment located in hazardous areas should be examined to ensure that it is suitable for the application and that the integrity of the protection concept has not been impaired.
Read the entire page →
From page 110...
... Material source report Chemical and mechanical properties for each heat Heat treatment temperatures and time at temperature Charpy temperature and impact values Hardness test readings (verification to NACE MR-01 -75)
Read the entire page →
From page 111...
... The requirements for the internal control plan, on the other hand, are not specified in detail. For example: The drilling rig shall be inspected at "short intervals." BOP equipment shall be pressure tested and operated at "regular intervals." · There shall be a Fire fighting plan." · Licensee shall ensure that the platform and equipment are in "proper working condition at all times." nNecessary" safer system shall be installed and maintained in accordance with "good oilfield practice." However, because of the critical nature of the internal control plans in terms of their impact on operational safety, maintenance, and inspection, they are thoroughly reviewed by the NPD.
Read the entire page →

Key Terms

  • certifying authorities
  • internal control
  • certifying authority
  • norwegian inspection
  • north sea

  • considerable leeway
  • heat treatment
  • operations typically
  • operational safety
  • work environment

  • typically utilize
  • norske veritas
  • control plan
  • emergency source
  • approved certifying

  • det norske
  • hardness test
  • control plans
  • guidance notes
  • cold seas

  • independent design
  • safety risks
  • operators set
  • ensure correct
  • societal differences

  • continuity path
  • equipotential bonding
  • sample checks
  • report consolidating
  • service company


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.