Skip to main content

Water Chemicals Codex (1982) / Chapter Skim
Currently Skimming:

Sodium Chlorite
Pages 44-45

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 44...
... AL irements: The RMIC values are based on a maximum dosage of 10 mg of sodium chlorite/liter of water and are to be compared to impurity concentrations obtained by using sample procedures described in this monograph. If the actual dosage is other than 10 mg/liter, the user is cautioned to consult Table 2 for appropriate RMIC values.
Read the entire page →
From page 45...
... Gently heat the solution to reduce the volume below 100 ml, making certain that it does not boil. Quantitatively transfer to a 100ml acid-washed volumetric flask and make to volume with deionized distilled water.
Read the entire page →

Key Terms

  • mercury analysis
  • mercury selenium
  • impurity mercury
  • sample procedures
  • chlorite solution

  • impurity concentrations
  • health association
  • concentrations obtained
  • appropriate rmic
  • consult table

  • using sample
  • bulk sample
  • selenium bulk
  • maximum dosage
  • american water

  • procedures described
  • actual dosage
  • rmic values
  • standard methods
  • deionized distilled

  • selenium mercury
  • volume below
  • mercury section
  • volumetric flask
  • chlorine dioxide

  • commercial strength
  • distilled water
  • reagent blank
  • quantitatively transfer
  • american public


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.