Fiber Additives in Asphalt Mixtures (2015) / Chapter Skim
Currently Skimming:
Pages 31-34
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 31... ...
29 CHAPTER FOUR CASE EXAMPLES have been used under environmental conditions similar to their own (wet freeze)
|
From page 32... ...
30 reduce reflective cracking, which was a common problem. Fibers also helped reduce rutting, another major problem.
|
From page 33... ...
31 modified binder. In addition, cellulose or mineral fibers are required to stabilize the asphalt binder and prevent excessive draindown.
|
From page 34... ...
32 • Dynamic modulus testing in indirect mode at a range of temperatures (-20°C, -10°C, 0°C, 10°C, 20°C, and 30°C) and frequencies (0.1, 1, 5, 10, 20 Hz)
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.