Comparing the Volumetric and Mechanical Properties of Laboratory and Field Specimens of Asphalt Concrete (2016) / Chapter Skim
Currently Skimming:
Pages 68-70
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 68... ...
68 7.1 Effect of Process-Based Factors The following section discusses the process-based factors affecting the differences among specimen types evaluated in this research study. This experiment was designed to evaluate the effects of five specific processes (i.e., baghouse fines, reheating, aggregate absorption, aggregate degradation, and aggregate stockpile moisture)
|
From page 69... ...
69 Property Comparison Significant Process AV Design (LL) - Producon (PL)
|
From page 70... ...
70 7.3.3 IDT Dynamic Modulus Conversion Table 7-5 presents the average conversion factors for IDT dynamic modulus determined for the three specimen types evaluated in this study. The conversion factor for design and production specimens is 1.0.
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.