Bus Operator Workstation Design for Improving Occupational Health and Safety (2016) / Chapter Skim
Currently Skimming:
Pages 1-7
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 1... ...
1 Purpose and Products Many bus operator workstation elements have changed in recent years, and many are evolving. Transit industry stakeholders -- transit agencies, bus and equipment manufacturers, trade groups, and government agencies -- all have an interest in enhancing the bus operator workstation design to improve bus operator health and safety.
|
From page 2... ...
2 Bus Operator Workstation Design for Improving Occupational Health and Safety Research Products TCRP Project C-22, "Bus Operator Workstation Design for Improving Occupational Health and Safety," produced a set of guidance documents and tools to help transit agencies and manufacturers integrate the suggested procurement practices and emerging technologies into bus operator workstation design and procurement. The products of this research include: 1.
|
From page 3... ...
Summary 3 stakeholders. The procurement training template and the bus operator ergonomics training framework will help procurement teams to understand the process before and during procurement.
|
From page 4... ...
4 Bus Operator Workstation Design for Improving Occupational Health and Safety Phase III: Specification, Request for Proposals (RFP) , and Award Step 8: Define options with all manufacturers.
|
From page 5... ...
Summary 5 Tool 1. The training could be developed and carried out by a consortium at a regional or national level.
|
From page 6... ...
6 Bus Operator Workstation Design for Improving Occupational Health and Safety Bus Operator Workstation Engineering CAD Model The research team applied 2-D and 3-D data from a current production transit bus to establish the basic architecture of a transit bus operator workstation. The modeling of components was accomplished using solid-modeling CAD.
|
From page 7... ...
Summary 7 Figure S-2. A front, isometric view of the Bus Operator Workstation 3-D PDF Model.
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.