Quantifying the Influence of Geosynthetics on Pavement Performance (2017) / Chapter Skim
Currently Skimming:
Pages 9-12
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 9... ...
9 CHAPTER 3. RESEARCH PLAN The research plan included six components: (a)
|
From page 10... ...
10 rest period was imposed to allow the pavement to rebound from the applied loading strains accumulated in the previous test. All loads were applied through a loading plate to the surface of the pavement layer.
|
From page 11... ...
11 was a base course that was used in the LST tests at the University of Nevada, Reno, and the other was a limestone base course commonly used in Texas. Both geotextiles and geogrids were placed at three different locations within the samples, and their effects on the anisotropic properties and permanent deformation properties of the base courses were measured.
|
From page 12... ...
12 deformation model. When geosynthetics were used in the design of a flexible pavement, these ANN models could be used in place of the current models in the Pavement ME Design software, as indicated schematically in Figure 1.1.
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.