Skip to main content

Bolting Reliability for Offshore Oil and Natural Gas Operations Proceedings of a Workshop (2018) / Chapter Skim
Currently Skimming:

Appendix B: Workshop Agenda
Pages 120-123

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 120...
... Corrosion protection requirements, benefits, and limitations of active and passive corrosion inhibiting solutions, and f) Understanding all the potential risks, limitations, and failure mechanisms arising from equipment and fastener design, manufacture, material, and coating selection.
Read the entire page →
From page 121...
... Moderator: Neil Thompson Speaker 2.1: Ian MacMoy, MST, LLC 30 min Speaker 2.2: Herman Amaya, Schlumberger 30 min Speaker 2.3: Oliver Moghissi, DNV GL Americas Oil & Gas 30 min Speaker 2.4: Salim Brahimi, Industrial Fasteners Institute 30 min Q&A discussion on Subsea Fastener Design Quality 60 min Q&A Open Discussion day 1 60 min 5:30 pm Adjourn
Read the entire page →
From page 122...
... Moderator: Roger McCarthy Speaker 3.1: Trent Fleece, BP 30 min Speaker 3.2: Frank Adamek, Adamek Engineering and Technology Solutions, LLC 30 min Speaker 3.3: Ken Armagost, Anadarko 30 min Speaker 3.4: Tom Goin, U.S. Bolt 30 min Speaker 3.5: Peter Bennett, Pacific Drilling 30 min Q&A discussion on Subsea Fastener In-Service Performance 60 min Noon Lunch 1:00 pm Panel 4.
Read the entire page →
From page 123...
... Appendix B 123 Moderator: Brun Hilbert Speaker 4.1: Rick Kachele, Navy 30 min Speaker 4.2: David Miller, API 30 min Speaker 4.3: Andy Woodfield, GE Aviation 30 min Speaker 4.4: Angelia Collier, FAA 30 min Q&A discussion on Standards and Regulations 60 min Q&A Open Discussion day 2 60 min 5:30 pm Adjourn
Read the entire page →

Key Terms

  • fastener design
  • root cause
  • design requirements
  • fastener failures
  • design quality

  • coating selection
  • subsea critical
  • subsea fasteners
  • testing methods
  • offshore environment

  • critical equipment
  • successful fasteners
  • fasteners performance
  • application design
  • onshore drilling

  • designs capable
  • diverse subsea
  • americas oil
  • equipment design
  • fastener cradle

  • interaction factors
  • subcontractor oversight
  • fastener designs
  • processing steps
  • protection requirements

  • quality management
  • alternative fastener
  • equipment oil
  • mechanical behavior
  • affecting fastener


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.