Field Performance of Corrugated Pipe Manufactured with Recycled Polyethylene Content (2018) / Chapter Skim
Currently Skimming:
Pages 96-103
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 96... ...
E-1 Finite Element Analysis from Ohio University Constant Strain Pipe Test Finite Element Analysis The objective of this task was to perform a three-dimensional (3D) finite element analysis (FEA)
|
From page 97... ...
E-2 Inner Diameter Width Crest Width Liner Width Valley Width Web Thickness Crest Thickness Liner Thickness Valley Thickness Web (in.)
|
From page 98... ...
E-3 Figure E-3. FEA mesh of pipe front view before and after deflection.
|
From page 99... ...
E-4 Figure E-5. FEA of pipe cross section.
|
From page 100... ...
E-5 Comparison of FEA Results to Experimental Data The FEA was first used to simulate the initial application of the load. The FEA and experimental results for the first 60 minutes for Frame 8 (virgin resin)
|
From page 101... ...
E-6 Figure E-8. FEA and experimental results comparison for the first 60 minutes (20% deflection)
|
From page 102... ...
E-7 Figure E-10. Strain in the pipe using FEA.
|
From page 103... ...
E-8 References Ferry J
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.