Tack Coat Specifications, Materials, and Construction Practices (2018) / Chapter Skim
Currently Skimming:
Pages 103-110
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 103... ...
106 Tack Coat Specifications, Materials, and Construction Practices 29% (2/7)
|
From page 104... ...
Summary of Survey Results (Canada)
|
From page 105... ...
108 Tack Coat Specifications, Materials, and Construction Practices 57% (4/7)
|
From page 106... ...
Summary of Survey Results (Canada)
|
From page 107... ...
110 Tack Coat Specifications, Materials, and Construction Practices to accommodate not more than 2 hours of production of HMA. HMA shall not be placed on tack coated areas until the tack coat has cured to a proper condition of tackiness.
|
From page 108... ...
111 A P P E N D I X D Kansas Department of Transportation: Bond Strength Special Provision and Best Management Checklists
|
From page 109... ...
112 Tack Coat Specifications, Materials, and Construction Practices KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2015 HMA BOND STRENGTH Page 600-2, subsection 602.1. Add the following bid item: BID ITEMS UNITS Emulsified Asphalt Square Yard Page 600-31, delete subsection 602.11c.
|
From page 110... ...
Kansas Department of Transportation: Bond Strength Special Provision and Best Management Checklists 113 If the tensile stress of a test is less than 35 psi, suspend plant production and paving. Follow the Best Management Processes to verify proper placement of tack material.
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.