Volume 1: TRAQS User Guide (2018) / Chapter Skim
Currently Skimming:
Pages 30-39
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 30... ...
TRAQS User Guide Page 30 4. NEW PROJECT WIZARD The New Project Wizard guides you through the options for creating a new TRAQS project.
|
From page 31... ...
TRAQS User Guide Page 31 4.1. PROJECT INFORMATION The Project Information page is the first screen of the New Project Wizard.
|
From page 32... ...
TRAQS User Guide Page 32 Analysis Type This section contains the types of analysis supported by TRAQS as follows: PM Project-Level Conformity Analysis: Option to complete a quantitative project-level conformity analysis for PM10 and/or PM2.5. Refer to the referenced U.S.
|
From page 33... ...
TRAQS User Guide Page 33 Analysis Year This is the year of the analysis. The year 2015 will be displayed by default, however, you may select another calendar year as follows: MOVES: Years 1990 and 1999 to 2015.
|
From page 34... ...
TRAQS User Guide Page 34 The 16-scenarios will capture emissions for the following: 1. Four seasons/quarters: Winter: January is the default month representing this season but February or March can also be selected.
|
From page 35... ...
TRAQS User Guide Page 35 Start Hour for the Period: This hour is to represent the start of the period representing the one hour/one MOVES run. This information is important when passing the calculated emissions to the AERMOD air dispersion model.
|
From page 36... ...
TRAQS User Guide Page 36 4.3. PROJECT DOMAIN The Project Domain page of the New Project Wizard allows you to define the geographical location and overall domain extent for your project.
|
From page 37... ...
TRAQS User Guide Page 37 Project Domain Center This section allows you to define the center point of your project's domain by specifying the project coordinates using the following options. Note that the map will automatically update as you enter the project coordinates.
|
From page 38... ...
TRAQS User Guide Page 38 UTM Zone: Enter the UTM zone for your project location (1 to 60)
|
From page 39... ...
TRAQS User Guide Page 39 Functionality of Tools You can adjust the zoom level of the map by using the Zoom bar next to the map interface. You can either enter a zoom level directly or adjust the sliding position of the zoom button.
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.