Skip to main content

Clean Ships, Clean Ports, Clean Oceans Controlling Garbage and Plastic Wastes at Sea (1995) / Chapter Skim
Currently Skimming:


Pages 297-300

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 297...
... 2.13 Cargo residues for the purposes of this standard are defined as the remnants of any cargo material on board that cannot be placed in proper cargo holds (loading excess and spillage) or which remains in cargo holds and elsewhere after unloading procedures are completed (unloading residual and spillage)
Read the entire page →
From page 298...
... A flue gas fan may be fitted to secure negative pressure. 3.10 The incinerating furnace may be charged with solid waste either by hand or automatically.
Read the entire page →
From page 299...
... 3.14.2 Electrical installation requirements should apply to all electrical equipment, including controls, safety devices, cables, and burners and .
Read the entire page →
From page 300...
... 3.14.5 Ignition system 3.14.5.1 When automatic electric ignition is provided, it should be accomplished by means of either a high-voltage electric spark, a highenergy electric spark or a glow coil. 3.14.5.2 Ignition transformers should have an enclosure corresponding to the environment where they are located, at least IP 44 according to IEC Publication 529.
Read the entire page →

Key Terms

  • flue gas
  • combustion chamber
  • cargo residues
  • negative pressure
  • fuel supply

  • iec publication
  • cargo holds
  • harmful substance
  • including controls
  • safety devices

  • fishing gear
  • overcurrent protection
  • interconnecting wiring
  • contaminated rags
  • oily rags


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.