Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
43 Pavement Design and Rehabilitation Manual, Section 500, Ohio Department of Transportation, Columbus, 1999 [Online]. Available: www.dot.state.oh.us/pavement/ Pubs/Sect500.pdf. Vandenbossche, J., Best Practices for the Design and Repair of Thin and Ultra-Thin Whitetopping Based on Mn/ ROAD Findings, University of Pittsburgh, Pittsburgh, Pa., 2005. Zaghloul, S.M., B.J. Coree, and R.S. McDaniel, âPractical Method for Ensuring the Success of Crack and Seat Operations Using the Falling Weight Deflectometer,â Transportation Research Record 1513, Transportation Research Board, National Research Council, Washing- ton, D.C., 1995, pp. 66â75. George, K.P., âFalling Weight Deflectometer for Estimating Subgrade Resilient Moduli: Final Report,â Research Division, Mississippi Department of Transportation, Jackson, 2003 [Online]. Available: www.mdot.state. ms.us/research/pdf/FWDRept.pdf. âLaboratory and Field Testing Services,â State Materials Office, Florida Department of Transportation, Tallahas- see, 2006 [Online]. Available: www.dot.state.fl.us/ statematerialsoffice/administration/resources/library/ publications/laboratory/testmenu.pdf. Muller, J., âPavement Loading Device, Falling Weight Deflectometer System,â General Services Division, Texas Department of Transportation, Austin, 1997 [Online]. Available: ftp://ftp.dot.state.tx.us/pub/txdot-info/gsd/ pdf/tss/tss167.pdf. BiBLioGraphY