Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
1 Introduction I n the past 15 years a consensus has emerged about the need to improve Kâ12 education, particularly in science, technology, engineering, and mathematics, the so-called STEM subjects. The lengthening list of groups and agencies calling for improvements includes the National Science Board, U.S. Department of Education, American Association for the Advancement of Science, National Academies, and many, many others (NSB, 2007; DOEd, 2008; AAAS, 1993; NAS, NAE, and IOM, 2007). In response, some legislative action, such as the 2007 America COMPETES Act (P.L. 110-69), has been taken to strengthen Kâ12 STEM education. Many concerns about the quality of STEM education are related to the challenges facing the nation in an increasingly interconnected, increasingly competitive world. The general belief is that improving Kâ12 STEM educa- tion can help the country meet those challenges in two important ways. First, it will keep the âpipelineâ of students prepared to pursue careers in various scientiï¬c and technical ï¬elds full. Second, it will raise the level of scientiï¬c and technological literacy in the general population. Ultimately, these changes should improve our ability to compete successfully in the global marketplace, defend ourselves against various non-economic threats, and improve our overall quality of life. Based on those beliefs, a tremendous amount of attention has been paid to the question of how to improve the teaching and learning of science and mathematics in elementary and secondary schools. In fact, this has been the 15
16 ENGINEERING IN Kâ12 EDUCATION focus of grants by federal agencies, presidential commissions, initiatives by professional organizations, and studies by think tanks. Improving technol- ogy education (the âTâ in STEM), however, has received signiï¬cantly less attention. By contrast, almost no attention has been paidâat least on the national levelâto the issue of engineering education (the âEâ in STEM) in grades Kâ12. The goal of this report is to begin to ï¬ll that gap by providing an over- view of the current state of Kâ12 engineering education in the United States and a discussion of what we must do in the coming years to make engineer- ing a more effective component of the STEM equation. CURRENT Kâ12 STEM EDUCATION The STEM acronym is a relatively recent innovation (Cavanagh and Trotter, 2008). Until 2001, the common shorthand was SMET, science, mathematics, engineering, and technology. The National Science Foundation (NSF) was the ï¬rst to begin referring to this collection of subjects as STEM, reï¬ecting a change in philosophy. Up to that point, NSFâs Kâ12 programs had targeted mostly high-achieving students who were the most likely to pursue careers in science, mathematics, and engineering. In the past decade, however, the agency has focused more resources on broad-based programs to appeal to the entire student population. The STEM acronym has since become ubiquitous, which might lead one to conclude that the four subjects (Box 1-1) represent a well connected system of learning. However, in reality, in most elementary and secondary schools, STEM subjects are taught with little or no connection among them. Students learn mathematics in one classroom, science in another, and technology and engineeringâif they learn them at allâin yet other classrooms. Science and Mathematics Science and mathematics are the two STEM components with the longest histories in Kâ12 education. Both subjects have standards, curricula, and assessments, large numbers of textbooks and other teaching materials, and established courses of teacher education and professional development. Every student in every school in the country is expected to have a minimum level of proï¬ciency in science and mathematics by the end of high school. More important in the context of this report, student proï¬ciency in both science and mathematics is widely recognized as important to individual
INTRODUCTION 17 BOX 1-1 The Four STEM Subjects* Science is the study of the natural world, including the laws of nature associated with physics, chemistry, and biology and the treatment or application of facts, principles, concepts, or conventions associated with these disciplines. Science is both a body of knowledge that has been accumulated over time and a processâscientiï¬c inquiryâthat gener- ates new knowledge. Knowledge from science informs the engineering design process. Technology comprises the entire system of people and organizations, knowledge, processes, and devices that go into creating and operating technological artifacts, as well as the artifacts themselves. Through- out history, humans have created technology to satisfy their wants and needs. Much of modern technology is a product of science and engineer- ing, and technological tools are used in both ï¬elds. Engineering is both a body of knowledgeâabout the design and crea- tion of human-made productsâand a process for solving problems. This process is design under constraint. One constraint in engineering design is the laws of nature, or science. Other constraints include such things as time, money, available materials, ergonomics, environmental regula- tions, manufacturability, and repairability. Engineering utilizes concepts in science and mathematics as well as technological tools. Mathematics is the study of patterns and relationships among quanti- ties, numbers, and shapes. Speciï¬c branches of mathematics include arithmetic, geometry, algebra, trigonometry, and calculus. Mathematics is used in science and in engineering. *See Chapter 2 for a more detailed discussion of relationships among science, technology, engineering, and mathematics. success and to the success of the country. Thus the relatively poor showing of U.S. students in these subjects on national assessments (Grigg et al., 2006; Lee et al., 2007) and comparative international studies, such as the TIMSS (Trends in International Mathematics and Science Study) assessment of fourth- and eighth-grade students around the world (Martin et al., 2008;
18 ENGINEERING IN Kâ12 EDUCATION Mullis et al., 2008), has led to numerous calls for improving science and mathematics education. In 2007, for example, the National Academy of Sciences, National Academy of Engineering, and Institute of Medicine (together called the National Academies) published Rising Above the Gathering Storm: Energiz- ing and Employing America for a Brighter Economic Future. The purpose of the report was to determine how the United States could maintain its com- petitiveness in the global marketplace, and the ï¬rst recommendation was to âincrease Americaâs talent pool by vastly improving Kâ12 mathematics and science educationâ (NAS, NAE, and IOM, 2007). A variety of legisla- tive initiatives at the state and federal levels have also addressed the issue. In addition to the recently enacted America COMPETES Act, the No Child Left Behind Act of 2001 (P.L. 107-110) speciï¬cally targets student achievement in science and mathematics by, for example, mandating testing in both subjects and providing funding for math and science partnerships between school districts and local colleges and universities (DoEd, 2008). Technology Education Although technology education has roots in the manual and industrial arts, over the past two decades the ï¬eld has broadened to emphasize under- standing of technology in its most general sense (Box 1-2). Technology education today is the study of the human-made world, including artifacts, processes, and their underlying principles and concepts, and the overarching goal of technology education is to equip students to participate effectively in our technologically dependent world (e.g., NAE and NRC, 2002). Some of the speciï¬c goals of technology education are described in Standards for Technological Literacy: Content for the Study of Technology, a report published in 2000 by the International Technology Education Association (ITEA). To meet those standards, Kâ12 students must develop competencies in ï¬ve areas: the nature of technology, technology and society, design, abilities for a technological world, and the designed world. The fourth competency, âabilities for a technological world,â requires that students know how to use and maintain everyday technologies and be able to assess the effects of using different technologies on society and the environment. The ï¬fth competency, âthe designed world,â requires an understanding of technologies in speciï¬c areas, such as medicine, agriculture, and information and communications. Despite a sustained campaign by ITEA and others, technology educa- tion is only slowly gaining acceptance. Many peopleâincluding many
INTRODUCTION 19 BOX 1-2 A Broad View of Technology In the broadest sense, technology is the process by which humans modify nature to meet their wants and needs. Most people, however, think of technology in terms of its artifacts: computers and software, aircraft, pesticides, water-treatment plants, birth-control pills, and micro- wave ovens, to name a few. But technology is more than these tangible products. The knowledge and processes used to create and to operate the artifactsâengineering know-how, manufacturing expertise, various tech- nical skills, and so onâare equally important. Technology also includes all of the infrastructure necessary for the design, manufacture, operation, and repair of technological artifacts, from corporate headquarters and engineering schools to manufacturing plants and maintenance facilities. Technology is a product of engineering and science, and science and technology are tightly coupled. A scientiï¬c understanding of the natural world is the basis for much of technological development today. Con- versely, technology is the basis for a good part of scientiï¬c research. The climate models meteorologists use to study global warming, for example, require supercomputers to run the simulations. Technology is also closely associated with innovation, the transformation of ideas into new and use- ful products or processes. Innovation requires not only creative people and organizations, but also the availability of technology and science and engineering talent. Technology and innovation are synergistic. The development of gene-sequencing machines, for example, has made the decoding of the human genome possible, and that knowledge is fueling a revolution in diagnostic, therapeutic, and other biomedical innovations. SOURCE: Adapted from NAE and NRC, 2002. educatorsâconfuse it with classes that train students to use computers. Today, classes in technology education are offered in a minority of school districts around the country, and only 12 states require completion of a tech- nology education course by students graduating high school (Dugger, 2007). Consequently, there are far fewer technology education teachers working in U.S. schools than science or mathematics teachers, and far fewer students taking technology education classes than classes in science and mathematics. Finally, technology education has received very little attention from policy makers. Compared to science and mathematics, technology is still a small blip on the radar screen of STEM education.
20 ENGINEERING IN Kâ12 EDUCATION Engineering If technology education is a small blip on the STEM radar screen, engi- neering education is almost invisible. Few people even think of engineering as a Kâ12 subject, and nationwide, very few Kâ12 teachers are engaged in engineering education, and very few schools expose students to engineer- ing ideas and activities. Engineering curricula that have been developed vary widely in focus, content, and requirements for implementation. Their purposes range from encouraging students to pursue careers in engineering to increasing technological literacy and improving student performance in science and mathematics. The conceptual frameworks of these curricula also vary greatly. No standards have been set for engineering education, no state or national assessment has been adopted, and almost no attention has been paid to engineering education by policy makers. In fact, engineering might be called the missing letter in STEM. Connection among the STEM Subjects Most Kâ12 schools in the United States teach STEM subjects as separate disciplines, sometimes called âsilosââa math silo, a science silo, perhaps a technology education silo, and, in rare cases, an engineering siloâwith few connections in curriculum, in teaching, or in classroom activities. Thus opportunities for leveraging the beneï¬ts of interconnections, such as using science inquiry to support learning of mathematical concepts, are largely lost. Students are left with an implicit message that each discipline stands on its own. This is a stark contrast to the real world of research and technology devel- opment, where scientists, engineers, mathematicians, and technologistsâ along with social scientists, business managers, and othersâwork together in teams to solve problems. Each STEM discipline brings unique capabilities and perspectives, but for the team to function effectively, each player must be able to draw on and use knowledge from all four disciplines. In some cutting-edge areas, such as nanotechnology, the line between scientists and engineers has all but disappeared. Opportunity and Uncertainty The near absence of engineering education in Kâ12 classrooms repre- sents both opportunity and uncertainty. The opportunity lies in strengthen- ing the engineering component of STEM education, which data presented
INTRODUCTION 21 in Chapter 3 suggest can simultaneously complement and improve learning in the other three disciplines. The uncertainty arises because there are still a great many unanswered questions about how engineering education should be incorporated into Kâ12 classrooms, as well as about the value of existing Kâ12 engineering education. THE STUDY AND REPORT The purpose of this study is to address three speciï¬c questions:1 What are realistic and appropriate learning outcomes for Kâ12 engi- neering education? How might engineering education complement the learning objec- tives of other content areas, particularly science, technology, and mathematics, and how might these other content areas complement learning objectives in engineering education? What educational policies, programs, and practices at the local, state, and federal levels might lead to the meaningful inclusion of engineering in Kâ12 education in the United States? The Study Committee To answer these questions, in 2006 the National Academy of Engineer- ing (NAE) and National Research Council Center for Education established the Committee on Kâ12 Engineering Education. The work of the committee was supported by a grant from NAE member Stephen D. Bechtel, Jr., and additional funds were provided by the Parametric Technology Corporation and NSF. Study Objectives The study had four objectives: Survey the landscape of current and past efforts to implement engineering-related Kâ12 instructional materials and curricula in the United States and other nations. 1The complete statement of task appears in an annex to this chapter.
22 ENGINEERING IN Kâ12 EDUCATION Review the available information showing the impact of these initiatives. Describe how Kâ12 engineering content incorporates science, tech- nology, and mathematics concepts, uses these subjects as context for exploring engineering concepts, or uses engineering as a context for exploring science, technology, and mathematics concepts. Report on the intended learning outcomes of Kâ12 engineering education initiatives, taking into account the age of the students, the focus of the curriculum (e.g., science vs. technology education), the orientation of the program (e.g., general education vs. career/ vocational education), and other factors. Although efforts have been made to introduce engineering to Kâ12 students in a variety of informal (non-school) settings, through websites, contests, after-school programs, and summer programs, this study focused only on formal Kâ12 activities. Fact-Finding Process To meet these objectives and answer the questions listed above, the com- mittee spent two years studying Kâ12 engineering education in the United States. During this time, the committee held ï¬ve face-to-face meetings, two of which accompanied information-gathering workshops. To get a sense of the Kâ12 engineering âlandscape,â the committee com- missioned an analysis of existing Kâ12 engineering curricula and reviews of the literature on conceptual learning related to engineering, the development of engineering skills, and evidence of the effectiveness of Kâ12 engineer- ing education initiatives. Finally, the committee also collected preliminary information about a few pre-college engineering education efforts in other countries. This report is based on these meetings, workshops, and analyses and reviews, as well as the expertise and experience of committee members. Report Outline Chapter 2 of the report addresses the question, âWhat is engineering?â Although many readers already have a clear idea of engineering, the com- mittee believes that understanding the purposes of and approaches to Kâ12 engineering education requires understanding not only what engineering
INTRODUCTION 23 is but also the key concepts of engineering (e.g., optimization, systems, the design process) and the relationships between engineering and other disci- plines, particularly science and mathematics. Chapter 3 provides a discussion of the available evidence showing the beneï¬ts of Kâ12 engineering education, such as improving learning in mathematics and science, improving technological literacy, and encouraging young people to consider careers in engineering or other technical ï¬elds, and the challenges to teaching engineering to Kâ12 students. Chapter 4 includes reviews of current Kâ12 engineering curricula, based largely on the com- missioned analyses and reviews. In addition, the chapter reviews teacher education and professional development programs. Chapter 5 discusses cognitive science research related to how students learn engineering concepts and skills and what this research suggests about the best approaches to teaching engineering in grades Kâ12. The committeeâs ï¬ndings and recommendations are presented in Chapter 6. Appendix A of the report provides biographical information for com- mittee members; Appendix B contains short descriptive summaries of 19 curriculum projects that did not receive a detailed review by the committee; Appendix C, included on an accompanying CD inside the back cover of the report, contains detailed reviews of another 15 Kâ12 engineering education curriculum projects. Intended Audiences This report will be of special interest to individuals and groups interested in improving the quality of Kâ12 STEM education in this country. But engi- neering educators, policy makers, employers, and others concerned about the development of the countryâs technical workforce will also ï¬nd much to ponder. The report should prove useful to advocates for greater public understanding of engineering, as well as to those working to boost citizensâ technological and scientiï¬c literacy. Finally, for educational researchers and cognitive scientists, the document exposes a rich set of questions related to how and under what conditions students come to understand engineering. REFERENCES AAAS (American Association for the Advancement of Science). 1993. Benchmarks for Science Literacy. New York: Oxford University Press.
24 ENGINEERING IN Kâ12 EDUCATION Cavanagh, S., and A. Trotter. 2008. Whereâs the âTâ in STEM? Education Week 27(30):17â19. Also available at http://www.edweek.org/ew/articles/2008/03/27/30stemtech.h27.html (accessed May 8, 2008). DoEd (U.S. Department of Education). 2008. Mathematics and science partnerships. Ofï¬ce of Elementary and Secondary Education. Available online at http://www.ed.gov/ programs/mathsci/index.html (accessed December 23, 2008). Dugger, W.E. Jr. 2007. The status of technology education in the United States: a triennial report of the ï¬ndings from the states. The Technology Teacher 67(1): 14â21. Grigg, W.S., M.A. Lauko, and D.M. Brockway. 2006. The Nationâs Report Card: Science 2005. Washington, D.C.: U.S. Department of Education, National Center for Educa- tion Statistics. Also available online at http://nces.ed.gov/NAEP/pdf/main2005/2006466. pdf (accessed December 12, 2008). Lee, J., W.S. Grigg, and G.S. Dion. 2007. The Nationâs Report Card: Mathematics 2007. Wash- ington, D.C.: U.S. Department of Education, National Center for Education Statistics. Also available online at http://nces.ed.gov/nationsreportcard/pdf/main2007/2007494.pdf (accessed December 12, 2008). Martin, M.O., I.V.S. Mullis, P. Foy, J.F. Olson, E. Erberber, C. Preuschoff, and J. Galia. 2008. TIMSS 2007 International Science Report: Findings from IEAâs Trends in International Mathematics and Science Study at the Fourth and Eighth Grades. Available online at http://timss.bc.edu/TIMSS2007/PDF/TIMSS2007_InternationalScienceReport.pdf (accessed December 12, 2008). Mullis, I.V.S., M.O. Martin, P. Foy, J.F. Olson, C. Preuschoff, E. Erberber, A. Arora, and J. Galia. 2008. TIMSS 2007 International Mathematics Report: Findings from IEAâs Trends in International Mathematics and Science Study at the Fourth and Eighth Grades. Available online at http://timss.bc.edu/TIMSS2007/PDF/TIMSS2007_ InternationalMathematicsReport.pdf (accessed December 12, 2008). NAE and NRC (National Academy of Engineering and National Research Council). 2002. Technically Speaking: Why All Americans Need to Know More about Technology. Washington, D.C.: National Academy Press. NAS, NAE, and IOM (National Academy of Sciences, National Academy of Engineering, and Institute of Medicine). 2007. Rising Above the Gathering Storm: Energizing and Employing America for a Brighter Economic Future. Washington, D.C.: The National Academies Press. NSB (National Science Board). 2007. A National Action Plan for Addressing the Critical Needs of the U.S. Science, Technology, Education, and Mathematics Education System. Washington, D.C.: National Science Foundation. Annex PROJECT STATEMENT OF TASK The goal of this project, a collaboration between the National Academy of Engineering and the National Research Councilâs Center for Education,
INTRODUCTION 25 through its Board on Science Education, is to provide carefully reasoned guidance to key stakeholders regarding the creation and implementation of Kâ12 engineering curricula and instructional practices, focusing especially on the connections among science, technology, engineering, and mathe- matics education. Engineering is deï¬ned as âdesign under constraint,â where the con- straints include the laws of nature, cost, safety, reliability, environmental impact, manufacturability, and many other factors. While science attempts to discover what is, engineering is concerned with what might beâwith extending human capability through modifying the natural world. Indeed, engineering is responsible for many of the most signiï¬cant improvements in our quality of life. Engineers identify and then solve problems using a highly creative and iterative design process. While engineering requires the applica- tion of mathematics and scientiï¬c knowledge, it is this design process and the practical nature of the problems tackled that best distinguish engineering. What qualiï¬es as engineering in the Kâ12 classroom, as contrasted with what engineering education is in post-secondary institutions, is something that this project will attempt to elucidate. In the early grades, âengineeringâ may be little more than a teacher-directed design activity, such as the construction of a balsa wood bridge, while in the later grades the design project may be considerably more open ended and involve the application of mathematics and science concepts to solve a speciï¬c problem. The project has the following objectives: 1. Survey the landscape of current and past efforts to implement engineering-related Kâ12 instructional materials and curricula in the United States and other nations. 2. Review evidence related to the impact of these initiatives, to the extent such information is available; 3. Describe the ways in which Kâ12 engineering content has incor- porated science, technology, and mathematics concepts, used these subjects as context to explore engineering concepts, or used engi- neering as a context to explore science, technology, and mathematics concepts; and 4. Report on the intended learning outcomes of Kâ12 engineering education initiatives, taking into account student age, curriculum focus (e.g., science vs. technology education), program orientation
26 ENGINEERING IN Kâ12 EDUCATION (e.g., general education vs. career/vocational education), and other factors. In meeting the goal and objectives, the project will focus on three key issues and three related guiding questions: 1. There are multiple perspectives about the purpose and place of engi- neering in the Kâ12 classroom. These points of view lead to empha- ses on very different outcomes. QUESTION: What are realistic and appropriate learning outcomes for engineering education in Kâ12? 2. There has not been a careful analysis of engineering education within a Kâ12 environment that looks at possible subject intersec- tions. QUESTION: How might engineering education complement the learning objectives of other content areas, particularly science, technology, and mathematics, and how might these other content areas complement learning objectives in engineering education? 3. There has been little if any serious consideration of the systemic changes in the U.S. education system that might be required to enhance Kâ12 engineering education. QUESTION: What educa- tional policies, programs, and practice at the local, state, and federal levels might permit meaningful inclusion of engineering at the Kâ12 level in the United States? Prior to the stage when the committee completes the preparation of its draft report for the institutional report review process, the committee will strive to obtain public inputs on key issues and on directions for the com- mittee to consider in its recommendations.