Fiber Additives in Asphalt Mixtures (2015)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

35 REFERENCES Abiola, O.S., W.K. Kupolati, E.R. Sadiku, and J.M. Ndambuki, “Utilisation of Natural Fibre as Modifier in Bituminous Mixes: A Review,” Construction and Building Materials, 2014, pp. 306–312 [Online]. Available: http://www.elsevier.com/locate/conbuildmat. Abtahi, S.M., S. Esfandiarpour, M. Kunt, S.M., Hejazi, and M.G. Ebrahimi, “Hybrid Reinforcement of Asphalt- Concrete Mixtures Using Glass and Polypropylene Fibers,” Journal of Engineering Fibers and Fabrics, Vol. 8, No. 2, 2013, pp. 25–35. Anderson, D.A., D. Maurer, T. Ramirez, D.W. Christensen, M.O. Marasteanu, and Y. Mehta, “Field Performance of Modified Asphalt Binders Evaluated with Superpave Test Methods: I-80 Test Project,” Transportation Research Record: Journal of the Transportation Research Board, No. 1661, Transportation Research Board of the National Academies, Washington, D.C., 1999, pp. 60–68. Anurag, K., F. Xiao, and S.N. Amirkhanian, “Laboratory Investigation of Indirect Tensile Strength Using Roofing Polyester Waste Fibers, in Hot Mix Asphalt,” Construction and Building Materials, Vol. 23, 2009, pp. 2035–2040. Austroads, “AG:PT/T235—Asphalt Binder Drain-Off,” 2006 [Online]. Available: www.onlinepublications. austroads.com.au/items/AGPT-T235-06 [accessed Aug. 26, 2014]. Austroads, Proceedings: Austroads National Stone Mastic Asphalt (SMA) Workshop, Technical Report AP-T92-07, Sydney, Australia, 2007. Bennert, T., Advanced Characterization Testing of Fiber Reinforced Hot Mix Asphalt, Rutgers University, Piscataway, N.J., Sep. 2012. Bennert, T., Forta Fi Fiber Mixture Evaluation, Rutgers University, Piscataway, N.J., n.d. Brown, E.R., J. E. Haddock, and C. Crawford, “Investigation of Stone Matrix Asphalt Mortars,” Transportation Research Record 1530, Transportation Research Board, National Research Council, Washington, D.C., 1996, pp. 95–102. Button, J.W. and J.A. Epps, Mechanical Characterization of Fiber-Reinforced Bituminous Concrete, Report 4061-1, Texas Transportation Institute, College Station, Feb. 1981, 99 pp. Button, J.W. and T.G. Hunter, Synthetic Fibers in Asphalt Paving Mixtures, Report No 319-1F, Texas Transportation Institute, College Station, 1984. Busching, H.W., E.H. Elliott, and N.G. Reyneveld, “A State-of- the-Art Survey of Reinforced Asphalt Paving,” Proceedings of the Annual Meeting of the Association of Asphalt Paving Technologists, Vol. 39, 1970, pp. 766–798. Chen, H. and Q. Xu, “Experimental Study of Fibers in Stabilizing and Reinforcing Asphalt Binder,” Fuel, Vol. 89, 2010, pp. 1616–1622. Chen, H., Q. Xu, S. Chen, and Z. Zhang, “Evaluation and Design of Fiber-Reinforced Asphalt Mixtures,” Materials and Design, Vol. 30, 2009, pp. 2595–2603. Chowdhury, A., J.W. Button, and A. Bhasin, Fibers from Recycled Tire as Reinforcement in Hot Mix Asphalt, Report No. 167453-1, Texas Transportation Institute, College Station, Aug. 2005, 58 pp. Cleven, M.A., Investigation of the Properties of Carbon Fiber Modified Asphalt Mixtures, Master’s Thesis, Michigan Technological University, Houghton, 2000. Cooley, L.A., Jr. and E.R. Brown, “Potential of Using Stone Matrix Asphalt for Thin Overlays,” Transportation Research Record: Journal of the Transportation Research Board No. 1749, Transportation Research Board of the National Academies, Washington, D.C., 2001, pp. 46–52. Cooley, L.A., Jr., E.R. Brown, and D.E. Watson, “Evaluation of Open-Graded Friction Course Mixtures Containing Cellulose Fibers,” Transportation Research Record No. 1723, Transportation Research Board of the National Academies, Washington, D.C., 2000, pp. 19–25. Cooley, L.A., Jr., J. Zhang, M.H. Huner, and E.R. Brown, “Use of Screenings to Produce Hot-Mix Asphalt Mixtures,” Transportation Research Record: Journal of the Transportation Research Board, No. 1832, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 59–66. Crispino, M., E. Mariani, and E. Toraldo, “Assessment of Fiber-Reinforced Bituminous Mixtures’ Compaction Temperatures Through Mastics Viscosity Tests,” Construction and Building Materials, Vol. 38, 2013, pp. 1031–1039. Cunagin, W., J. Musselman, R. Taylor, and B. Dietrich, “Florida’s Return on Investment from Pavement Research and Development,” Transportation Research Board 93rd Annual Meeting Compendium of Papers, Transportation Research Board of the National Academies, Washington, D.C., 2014. Dai, Q., Z. Wang, and M.R.M. Hasan, “Investigation of Induction Healing Effects on Electrically Conductive Asphalt Mastic and Asphalt Concrete Beams Through Fracture-Healing Tests,” Construction and Building Materials, Vol. 49, 2013, pp. 729–737. Das, B.R. and P.K. Banerjee, “Interface Bond and Compatibility of Jute with Asphalt,” Composites, Part B, Vol. 53, 2013, pp. 69–75.

36 Do Vale, A., M. Casagrande, and J. Soares, “Behavior of Natural Fiber in Stone Matrix Asphalt Mixtures Using Two Design Methods,” Journal of Materials in Civil Engineering, Vol. 26, No. 3, 2014, pp. 457–465. Edgar, R., Ten Year Performance of Asphalt Additive Test Sections: Lava Butte-Fremont Highway Junction Section, Report FHWA-IR-RD-99-08, Federal Highway Administration, Washington, D.C., 1998. El-Sheikh, M. and J.J. Sudol, Third Interim Performance Report: Cracking and Seating of Concrete Pavement on I-74 and Performance of Bituminous Mixture with Polypropylene Fibers, Indiana Department of Transportation, Division of Research, West Lafayette, July 1989. Federal Highway Administration (FHWA), Distress Identification Manual for the Long-Term Pavement Performance Program, Publication FHWA-RD-03-031, FHWA, Washington, D.C., 2003. Fortier, R. and T.S. Vinson, “Low Temperature Cracking and Aging Performance of Modified Asphalt Concrete Specimens,” Transportation Research Record 1630, Transportation Research Board, National Research Council, Washington, D.C., 1998, pp. 77–88. Freeman, R.B., J.L. Burati, Jr., S.N. Amirkhanian, and W.C. Bridges, Jr., “Polyester Fibers in Asphalt Paving Mixtures,” Proceedings of the Association of Asphalt Paving Technologists, Vol. 89, 1989, pp. 387–409. Gallego, J., M.A. del Val, V. Contreras, and A. Páez, “Heating Asphalt Mixtures with Microwaves to Promote Self- Healing,” Construction and Building Materials, Vol. 42, 2013, pp. 1–4. Galinsky, J.D., Performance of Bituminous Surface with Fibers on I-65: Final Report, Indiana Department of Highways, Division of Research and Training, West Lafayette, Mar. 1984. García, Á., M. Bueno, J. Norambuena-Contreras, and M.N. Partl, “Induction Healing of Dense Asphalt Concrete,” Construction and Building Materials, Vol. 49, 2013a, pp. 1–7. García, Á., J. Norambuena-Contreras, and M.N. Partl, “Experimental Evaluation of Dense Asphalt Concrete for Induction Heating Purposes,” Construction and Building Materials, Vol. 46, 2013b, pp. 48–54. García, Á., E. Schlangen, M. van de Ven, and G. van Bochove, “Optimization of Composition and Mixing Process of a Self-Healing Porous Asphalt,” Construction and Building Materials, Vol. 30, 2012a, pp. 59–65. García, Á., E. Schlangen, M. van de Ven, and Q. Liu, “A Simple Model to Define Induction Heating in Asphalt Mastic,” Construction and Building Materials, Vol. 31, 2012b, pp. 38–46. García, Á., E. Schlangen, M. van de Ven, and Q. Liu, “Electrical Conductivity of Asphalt Mortar Containing Conductive Fibers and Fillers,” Construction and Building Materials, Vol. 23, 2009, pp. 3175–3181. Gibson, N., and X. Li, “Cracking Characterization of Asphalt Mixtures with Fiber Reinforcement Using Cyclic Fatigue and Direct Tension Strength Tests,” paper submitted to Transportation Research Board for 94th Annual Meeting, Jan. 2015. Gibson, N., X. Qi, A. Shenoy, G. Al-Khateeb, M.E. Kutay, A. Andriescu, K. Stuart, Y. Youtcheff, and T. Harman, Performance Testing for Superpave and Structural Validation, Report FHWA-HRT-11-045, FHWA, McLean, Va., 2012. Guan, B., R. Xiong, R. He, S. Chen, and D. Ding, “Investigation of Usability of Brucite Fiber in Asphalt Mixture,” International Journal of Pavement Research and Technology, Vol. 7, No. 3, 2014, pp. 193–202. Hassan, H.F., S. Al-Oraimi, and R. Taha, “Evaluation of Open-Graded Friction Course Mixtures Containing Cellulose Fibers and Styrene Butadiene Rubber Polymer,” Journal of Materials in Civil Engineering, Vol. 17, 2005, pp. 416–422. Huang, H. and T.D. White, “Dynamic Properties of Fiber- Modified Overlay Mixture,” Transportation Research Record 1545, Transportation Research Board, National Research Council, Washington, D.C., 1996, pp. 98–104. Jiang, Y. and R.S. McDaniel, Evaluation of Cracking and Seating Technique and Use of Polypropylene Fibers in Bituminous Mixtures on I-74, Final Report, Indiana Department of Transportation, West Lafayette, 1992. Kaloush, K.E., K.P. Biligiri, W.A. Zeiada, M.C. Rodenzo, and J.X. Reed, “Evaluation of Fiber-Reinforced Asphalt Mixtures Using Advanced Materials Characterization Tests,” Journal of Testing and Evaluation, Vol. 38, No. 4, July 2010, pp. 1–12. Khattak, M.J., A. Khattab, and H.R. Rizvi, “Characterization of Carbon Nano-Fiber modified Hot Mix Asphalt Mixtures,” Construction and Building Materials, Vol. 40, 2013, pp. 738–745. Khattak, M.J., A. Khattab, H.R. Rizvi, and P. Zhang, “The Impact of Carbon Nano-Fiber Modification on Asphalt Binder Rheology,” Construction and Building Materials, Vol. 30, 2012, pp. 257–264. Kutay, M.E., N. Gibson, J. Youtcheff, and R. Dongré, “Use of Small Samples to Predict Fatigue Lives of Field Cores: Newly Developed Formulation Based on Viscoelastic Continuum Damage Theory,” Transportation Research Record: Journal of the Transportation Research Board, No. 2127, Transportation Research Board of the National Academies, Washington, D.C., 2009, pp. 90–97. Liu, Q., E. Schlangen, and M. van de Ven, “Induction Healing of Porous Asphalt,” Transportation Research Record: Journal of the Transportation Research Board

37 No. 2305, Transportation Research Board of the National Academies, Washington, D.C., 2012, pp. 95–101. Liu, X. and W. Shaopeng, “Study on the Graphite and Carbon Fiber Modified Asphalt Concrete,” Construction and Building Materials, Vol. 25, 2011, pp. 1807–1811. Lyons, K.R. and B.J. Putnam, “Laboratory Evaluation of Stabilizing Methods for Porous Asphalt,” Construction and Building Materials, Vol. 49, 2013, pp. 772–780. Maurer, D.A. and G.J. Malasheskie, “Field Performance of Fabrics and Fibers to Retard Reflective Cracking,” Geotextiles and Geomembranes, Vol. 8, 1989, pp. 239–267. McDaniel, R.S., Supplemental Report: 1985 Update on Performance of Bituminous Surface with Fibers, Indiana Department of Highways, Division of Research and Training, West Lafayette, Dec. 1985. McDaniel, R.S., Asphalt Additives to Control Rutting and Cracking, PhD Dissertation, Purdue University, West Lafayette, Ind., 2001. McDaniel, R.S. and A. Shah, Asphalt Additives to Control Rutting and Cracking, Final Report, FHWA/IN/JTRP- 2002/29, Joint Transportation Research Program, West Lafayette, Ind., Jan. 2003. McGhee, K.K., E.D. de León Izeppi, G.W. Flintsch, and D.E. Mogrovejo, “Virginia Quieter Pavement Demonstration Projects: Initial Functional Assessment,” Transportation Research Record: Journal of the Transportation Research Board, No. 2362, Transportation Research Board of the National Academies, Washington, D.C., 2013, pp. 16–24. Morova, N., “Investigation of Usability of Basalt Fibers in Hot Mix Asphalt Concrete,” Construction and Building Materials, Vol. 47, 2013 [Online]. Available: http://dx. doi.org/10.1016/j.conbuildmat.2013.04.048 [accessed June 15, 2014]. Muniandy, R., N.A.B.C.M. Akhir, S. Hassim, and D. Moazami, “Laboratory Fatigue Evaluation of Modified and Unmodified Asphalt Binders in Stone Mastic Asphalt Mixtures Using a Newly Developed Crack Meander Technique,” International Journal of Fatigue, Vol. 59, 2014, pp. 1–8. Oda, S.J.L. Fernandes Jr. and J.S. Idefonso, “Analysis of Use of Natural Fibers and Asphalt Rubber Binder in Discontinuous Asphalt Mixtures,” Construction and Building Materials, Vol. 26, 2012, pp. 13–20. Peltonen, P., “Wear and Deformation Characteristics of Fibre Reinforced Asphalt Pavements,” Construction and Building Materials, Vol. 5, No. 1, 1991, pp. 18–22. Putnam, B.J., “Effects of Fiber Finish on the Performance of Asphalt Binders and Mastics,” Advances in Civil Engineering, Vol. 2011, 11 pp. Putnam, B.J. and S.N. Amirkhanian, “Utilisation of Waste Fibers in Stone Matrix Asphalt Mixtures,” Resources, Conservation and Recycling, Vol. 42, 2004, pp. 265–274. Qiang, X., L. Lei, and C. Yi-Jun, “Study on the Action Effect of Pavement Straw Composite Fiber Material in Asphalt Mixtures,” Construction and Building Materials, Vol. 43, 2013, pp. 293–299. Schmiedlin, R.B., “Stone Matrix Asphalt: The Wisconsin Experience,” Transportation Research Record 1616, Transportation Research Board, National Research Council, Washington, D.C., 1998, pp. 34–41. Science Channel, “How It’s Made, Stone Wool” [Online]. Available: https://www.youtube.com/watch?v=t6FWPT ZjwLo [accessed Aug. 7, 2014]. Serin, S., N. Morova, M. Saltan, and S. Terzi, “Investigation of Usability of Steel Fibers in Asphalt Concrete Mixtures,” Construction and Building Materials, Vol. 36, 2012, pp. 238–244. Serfass, J.P. and J. Samanos, “Fiber-Modified Asphalt Concrete Characteristics, Applications and Behavior,” Journal of the Association of Asphalt Paving Technologists, Vol. 65, 1996, pp. 193–230. Shoenberger, J.E., “Construction of Stone Matrix Asphalt Section at Edwards Air Force Base,” Transportation Research Record 1543, Transportation Research Board, National Research Council, Washington, D.C., 1996, pp. 29–37. Stempihar, J.J., M.I. Souliman, and K.E. Kaloush, “Fiber- Reinforced Asphalt Concrete as Sustainable Paving Material for Airfields,” Transportation Research Record: Journal of the Transportation Research Board, No. 2266, Transportation Research Board of the National Academies, Washington, D.C., 2012, pp. 60–68. Stuart, K.D. and P. Malmquist, “Evaluation of Using Different Stabilizers in the U.S. Route 15 (Maryland) Stone Matrix Asphalt, Transportation Research Record 1454, Transportation Research Board, National Research Council, Washington, D.C., 1994, pp. 48–57. Tapkin, S., A. Ҫevik, and Ü. Uşar, “Prediction of Marshall Test Results for Polypropylene Modified Dense Bituminous Mixtures Using Neural Networks,” Expert Systems with Applications, Vol. 37, 2010, pp. 4660–4670. Tapkin, S., Ü. Uşar, A. Tuncan, and M. Tuncan, “Repeated Creep Behaviors of Polypropylene Fiber-Reinforced Bituminous Mixtures,” Journal of Transportation Engineering, Vol. 135, 2009, pp. 240–249. Tayfur, S., H. Ozen, and A. Aksoy, “Investigation of Rutting Performance of Asphalt Mixtures Containing Polymer Modifiers,” Construction and Building Materials, Vol. 21, 2007, pp. 328–337.

38 Toney, C.A., Fiber Reinforced Asphalt Concrete Pavements— City of Tacoma, Report No. WA-RD 133.1, Washington State Department of Transportation, Olympia, 1987. University of Idaho, “KLK568: Evaluation of Fiber- Reinforced Asphalt Pavements—Phase 1: Laboratory Study” [Online]. Available: http://www.webpages. uidaho.edu /niat t /research /Project_Descriptions / KLK568.htm [accessed January 29, 2015]. U.S. Environmental Protection Agency (USEPA), “Compilation of Air Pollutant Emission Factors,” Chapter 11, Jan. 1995 [Online]. Available: http://www.epa.gov/ ttnchie1/ap42/ch11/final/c11s18.pdf [accessed Aug. 7, 2014]. Watson, D.E., Updated Review of Stone Matrix Asphalt and Superpave Projects,” Transportation Research Record: Journal of the Transportation Research Board, No. 1832, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 217–223. Watson, D.E., L.A. Cooley, Jr., K.A. Moore, and K. Williams, “Laboratory Performance Testing of Open-Graded Friction Course Mixtures,” Transportation Research Record: Journal of the Transportation Research Board, No. 1891, Transportation Research Board of the National Academies, Washington, D.C., 2004, pp. 40–47. Watson, D., A. Johnson, and D. Jared, “Georgia Department of Transportation’s Progress in Open-Graded Friction Course Development,” Transportation Research Record 1616, Transportation Research Board, National Research Council, Washington, D.C., 1998, pp. 30–33. Watson, D.E., K.A. Moore, K. Williams, and L.A. Cooley, Jr., “Refinement of New-Generation Open-Graded Friction Course Mix Design, Transportation Research Record: Journal of the Transportation Research Board No. 1832, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 78–85. Xu, Q., H. Chen, and J. Prozzi, “Performance of Fiber Reinforced Asphalt Concrete Under Environmental Temperature and Water Effects,” Construction and Building Materials, Vol. 24, 2010, pp. 2003–2010. Yao, H., Z. You, L. Li, S.W. Goh, C.H. Lee, and Y.K. Yap, “Rheological Properties and Chemical Analysis of Nanoclay and Carbon Microfiber Modified Asphalt with Fourier Transform Infrared Spectroscopy,” Construction and Building Materials, Vol. 38, 2013, pp. 327–337.