National Academies Press: OpenBook
« Previous: References
Page 54
Suggested Citation:"Acronyms." National Academies of Sciences, Engineering, and Medicine. 2013. Methods for Evaluating Fly Ash for Use in Highway Concrete. Washington, DC: The National Academies Press. doi: 10.17226/22483.
×
Page 54

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

54 AEA Air entraining admixture or agent ASR Alkali-silica reactivity AASHTO American Association of State Highway Officials CCRL Cement and Concrete Reference Laboratory COD Chemical oxygen demand CFA Coal fly ash DTA Differential thermal analysis FHWA Federal Highway Administration ITZ Interfacial transition zone KHI Keil hydraulic index LOI Loss on ignition NCHRP National Cooperative Highway Research Program NIST National Institute of Standards and Technology PCC Portland cement concrete PAC Powdered activated carbon PAI Pozzolanic Activity Index QXRD Quantitative x-ray diffraction RIR Relative intensity ratio SHA State highway agencies SAI Strength Activity Index SCM Supplementary cementitious materials TGA Thermal gravimetric analysis TMA Thermomechanical analysis w/cm Water-cementitious material ratio XRD X-ray diffraction XRF X-ray fluorescence Acronyms

Next: Attachment A - Summary of Proposed Changes to AASHTO M 295-11, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete »
Methods for Evaluating Fly Ash for Use in Highway Concrete Get This Book
×
 Methods for Evaluating Fly Ash for Use in Highway Concrete
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

TRB’s National Cooperative Highway Research Program (NCHRP) 749: Methods for Evaluating Fly Ash for Use in Highway Concrete presents suggested changes to coal fly ash specifications and test protocols contained in American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications for Transportation Materials and Methods of Sampling and Testing (AASHTO M 295).

The changes suggested include modifications to the test methods currently specified for evaluating acceptability of fly ash for use in highway concrete as well as the introduction of new test methods for enhancing such evaluations.

Attachment C: Details of the Research into Methods for Evaluating Fly Ash Use in Highway Concrete is only available online.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!