Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
B-1 APPENDIX B STATE ROAD DESIGN MANUALS AND TECHNICAL SPECIFICATIONS Geometric Design Criteria for, Non Freeway Resurfacing, Restoration and Rehabilitation Projects, page 10, Arkansas State Highway and Transportation Department Approved by FHWA, August, 1989. Roadway Design Guidelines. Arizona Department of Transportation. Jan 02, 2007 http://www.azdot.gov/highways/Roadway_Engineering/Roadway_Design/Guidelines/Manuals/P DF/RoadwayDesignGuidelines.pdf (As of August 2010) .Geometric Design Criteria for Nonfreeway, Resurfacing, and Rehabilitation Projects, Arkansas Department of Transportation. August 21, 1989. Highway Design Manual, Index 201/204, Geometric Design and Structure Design. California Department of Transportation, January 2007 http://www.dot.ca.gov/hq/oppd/hdm/hdmtoc.htm (As of August 2010) Colorado Design Manual, Chapter 3, Elements of Design, Colorado Department of Transportation, 2005. http://www.cde.state.co.us/artemis/tra3_11/tra48d462006internet/tra48d46200605internet.pdf (As of August 2010) Connecticut Highway Design Manual, Chapter 9, Vertical Curves, Connecticut Department of Transportation, Dec. 2003. Road Design Manual, Chapter 5, Alignment and Superelevation, Delaware Department of Transportation, July 2004. http://deldot.gov/information/pubs_forms/manuals/road_design/pdf/05_allignment_superelev.pdf (As of August 2010) Plans Preparation Manual, Chapter 2, Design Geometrics and Criteria, Florida Department of Transportation, January 2010. http://www.dot.state.fl.us/rddesign/PPMManual/2010/Volume1/Chap02.pdf (As of August 2010) Plans Preparation Manual, Chapter 25, Design Criteria for Resurfacing, Restoration, Rehabilitation (RRR) of Streets and Highways, page 25-23, Florida Department of Transportation, January 1, 2010. http://www.dot.state.fl.us/rddesign/rd/rtds/10/104.pdf (As of August 2010) GDOT Design Policy Manual, Chapter 4, Elements of Design, Georgia Department of Transportation. June 2010. Bureau of Design & Environment Manual, Ch. 33, Vertical Alignment, Illinois Department of Transportation, December 2002. http://www.dot.il.gov/desenv/bdemanual.html (As of August 2010)
B-2 Indiana Design Manual, Section 44-3.02, Sag Vertical Curve, Indiana Department of Transportation, 2010. Design Manual, Chapter 6, Geometric Design. Iowa Department of Transportation. January 2002. http://www.iowadot.gov/design/dmanual/06d-05.pdf (As of August 2010) Design Manual, Section 7.7.3, Vertical Alignment. Kansas Department of Transportation, November 2008. GYTK Highway Design, HD-701, Geometric Design Guidelines. Kentucky Department of Transportation January 2006. http://transportation.ky.gov/design/designmanual/chapters/10Chapter%200700%20AS%20PRIN TED%202006.pdf (As of August 2010) Roadway Design Procedures and Details, Chapter 4, Elements of Design, Cross Section Elements, Louisiana Department of Transportation and Development, January 2009. Road Design Manual, Chapter 4, Section 4.3, Vertical Alignment. Louisiana Department of Transportation, August 2006. Project Development and Design Guide, Ch 4, Horizontal and Vertical Alignment, Massachusetts Department of Transportation, 2006. http://www.mhd.state.ma.us/default.asp?pgid=content/designGuide&sid=about (As of August 2010) Michigan Design Manual, Road Design Michigan Department of Transportation, http://mdotwas1.mdot.state.mi.us/public/design/englishroadmanual/ (As of August 2010) Road Design Manual, Chapter 3-4, Vertical Alignment, Minnesota Department of Transportation, October 1999. http://www.dot.state.mn.us/design/rdm/english/3e.pdf. (As of August 2010) Memorandum, Vertical Curve K-Values, Mississippi Department of Transportation, October 2008. Road Design Manual, Ch 10, Vertical Alignment, Montana Department of Transportation, April 2006. http://www.mdt.mt.gov/other/roaddesign/external/montana_road_design_manual (As of August 2010) Roadway Design Manual, Ch 3, Roadway Alignment, Nebraska Department of Transportation, July 2006. http://www.dor.state.ne.us/roadway-design/pdfs/rwydesignman.pdf (As of August 2010) Road Design Guide, Section 2, Design Elements, Nevada Department of Transportation, April 22, 2010. http://www.nevadadot.com/divisions/010/designguide.asp (As of August 2010)
B-3 Highway Design Manual Chapter 4, Alignment and Typical Section, New Hampshire Department of Transportation, March 1999. http://www.nh.gov/dot/org/projectdevelopment/highwaydesign/designmanual/documents/HDMch apter04.pdf (As of August 2010) Highway Design Manual Chapter 5. Basic Design, New York Department of Transportation, Aug. 23, 2006 http://www.nysdot.gov/portal/page/portal/divisions/engineering/design/dqab/hdm (As of August 2010) Resurfacing, restoration and Rehabilitation (R-R-R) of Highways and Streets, North Carolina Department of Transportation, April 2004 Sub Regional Tier Design Guidelines for Bridge Projects, Division of Highways NCDOT, February 2008 Design Manual, Section I-06, Design Philosophy, North Dakota Department of Transportation, February 2010. http://www.dot.nd.gov/manuals/design/designmanual/chapter1/DM-1- 06_tag.pdf (As of August 2010) Design Manual Section 203.3.4, Horizontal and Vertical Design, Ohio Department of Transportation, January 2006. http://www.dot.state.oh.us/Divisions/ProdMgt/Roadway/roadwaystandards/Location%20and%2 0Design%20Manual/200_oct09.pdf (As of August 2010) Design Manual Section 7.2.2.3, Vertical Alignment, Oklahoma Department of Transportation July 1992. Highway Design Manual Chapter 5, General Design Standards and Design Elements, Oregon Department of Transportation 2003. http://www.oregon.gov/ODOT/HWY/ENGSERVICES/hwy_manuals.shtml (As of August 2010) Highway Design Manual Chap. 2 Design Elements and Design Control, Pennsylvania Department of Transportation, June 2007. ftp://ftp.dot.state.pa.us/public/Bureaus/design/Pub13M/Chapters/Chap02.pdf. (As of August 2010) Design Manual Section 12.5.1.2 Vertical Curves, South Carolina Department of Transportation, October, 2005. Road Design Manual, Chapter 6, Vertical Alignment, South Dakota Department of Transportation.http://www.sddot.com/pe/roaddesign/docs/rdmanual/rdmch06.pdf (As of August 2010) Roadway Design Standards Section RD-TS, Tennessee Department of Transportation, March 2003. http://www.tdot.state.tn.us/Chief_Engineer/engr_library/design/Std_Drwg_Eng.htm#ROADWAY DESIGNSTANDARDSINDEX (As of August 2010)
B-4 Roadway Design Manual, Section 5, Vertical Alignment, Texas Department of Transportation, 2010 http://onlinemanuals.txdot.gov/txdotmanuals/rdw/vertical_alignment.htm (As of August 2010) Roadway Design Manual of Instruction, Section 7.4, Alignment, Utah Department of Transportation, November 2009. Road Design Manual, Section 2A-6, Study of Alternatives, Virginia Department of Transportation, 2005. http://www.extranet.vdot.state.va.us/locdes/Electronic%20Pubs/2005%20RDM/chap2a.pdf (As of August 2010) Design Directives, Section DD-601, Geometric Design Criteria for Rural Highways, West Virginia Department of Transportation, May 2006, http://www.transportation.wv.gov/highways/engineering/DD/2006WVDDManual.pdf Facilities Development Manual, Wisconsin Department of Transportation, December 2002. http://roadwaystandards.dot.wi.gov/standards/fdm/11-10.pdf (As of August 2010)
