Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
i Summary of the Sensing and Positioning Technology Workshop of the Committee on Nanotechnology for the Intelligence Community Interim Report October 27â28, 2003 Washington, D.C. Greg Eyring, Rapporteur NATIONAL MATERIALS ADVISORY BOARD DIVISION ON ENGINEERING AND PHYSICAL SCIENCES NATIONAL RESEARCH COUNCIL OF THE NATIONAL ACADEMIES THE NATIONAL ACADEMIES PRESS Washington, D.C. www.nap.edu
ii NOTICE: This project was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine. The members of the committee responsible for this project were chosen for their special competences and with regard for appropriate balance. This study was supported by Contract No. 2003-A442100â000 between the National Academy of Sciences and the Intelligence Technology Information Center (ITIC). Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the views of the organizations or agencies that provided support for the project. Cover: SEM micrograph images courtesy of DARPA and ITN Energy Systems. International Standard Book Number 0-309-09245-0 (Book) A supplement to this workshop summary was determined by the U.S. Government to contain classified information. The supplement can be accessed at the following secure Web site: http://www.jicrd.cia.ic.gov/papers/reports/index.htm. A limited number of copies of this report are available from the National Materials Advisory Board, 500 Fifth Street, N.W., Keck WS932, Washington, DC 20001; (202) 334â3505 or (202) 334â3718; Internet, <http://www.nas.edu/nmab> Copyright 2004 by the National Academy of Sciences. All rights reserved. Printed in the United States of America
iii The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare. Upon the authority of the charter granted to it by the Congress in 1863, the Acade my has a mandate that requires it to advise the federal government on scientific and technical matters. Dr. Bruce M. Alberts is president of the National Academy of Sciences. The National Academy of Engineering was established in 1964, under the charter of the National Academy of Sciences, as a parallel organization of outstanding engineers. It is autonomous in its administration and in the selection of its members, sharing with the National Academy of Sciences the responsibility for advising the federal government. The National Academy of Engineering also sponsors engineering programs aimed at meeting national needs, encourages education and research, and recognizes the superior achievements of engineers. Dr. Wm. A. Wulf is president of the National Academy of Engineering. The Institute of Medicine was established in 1970 by the National Academy of Sciences to secure the services of eminent members of appropriate professions in the examination of policy matters pertaining to the health of the public. The Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government and, upon its own initiative, to identify issues of medical care, research, and education. Dr. Harvey V. Fineberg is president of the Institute of Medicine. The National Research Council was organized by the National Academy of Sciences in 1916 to associate the broad community of science and technology with the Academyâs purposes of furthering knowledge and advising the federal government. Functioning in accordance with general policies determined by the Academy, the Council has become the principal operating agency of both the National Academy of Sciences and the National Academy of Engineering in providing services to the government, the public, and the scientific and engineering communities. The Council is administered jointly by both Academies and the Institute of Medicine. Dr. Bruce M. Alberts and Dr. Wm. A. Wulf are chair and vice chair, respectively, of the National Research Council. www.national-academies.org
v COMMITTEE ON NANOTECHNOLOGY FOR THE INTELLIGENCE COMMUNITY ROBERT J.HERMANN, Chair, Global Technology Partners, LLC, Hartford, Connecticut ANTONIO A.CANTU, U.S. Secret Service, Washington, D.C. JAMES J.DE YOREO, Lawrence Livermore National Laboratory, Livermore, California DANIEL H.DOUGHTY, Sandia National Laboratories, Albuquerque, New Mexico LAWRENCE H.DUBOIS, SRI International, Menlo Park, California ALAN H.EPSTEIN, Massachusetts Institute of Technology, Cambridge WILHELM B.GAUSTER, Sandia National Laboratories, Albuquerque, New Mexico SHERLEY A.JACKSON, Rensselaer Polytechnic Institute, Troy, New York SIEGFRIED W.JANSON, The Aerospace Corporation, El Segundo, California ANTHONY F.LAVIANO, Raytheon, El Segundo, California DEBRA R.ROLISON, Naval Research Laboratory, Washington, D.C. R.PAUL SCHAUDIES, Science Applications International Corporation, Rockville, Maryland JULIA R.WEERTMAN, Northwestern University, Evanston, Illionois GEORGE M.WHITESIDES, Harvard University, Cambridge, Massachusetts ELLEN D.WILLIAMS, University of Maryland, College Park, Maryland MARY H.YOUNG, HRL Laboratories, Malibu, California NRC Staff JAMES KILLIAN, Senior Staff Officer RUSSELL MOY, Senior Staff Officer TERI G.THOROWGOOD, Research Associate GREG EYRING, Rapporteur (consultant)
vi NATIONAL MATERIALS ADVISORY BOARD JULIA M.PHILLIPS, Chair, Sandia National Laboratories, Albuquerque, New Mexico JOHN ALLISON, Ford Motor Company, Dearborn, Michigan PAUL BECHER, Oak Ridge National Laboratory, Oak Ridge, Tennessee BARBARA BOYAN, Georgia Institute of Technology, Atlanta ROBERT J.CAVA, Princeton Materials Institute, Princeton, New Jersey FIONA DOYLE, University of California, Berkeley GARY FISCHMAN, Consultant, Palatine, Illinois HAMISH L.FRASER, Ohio State University, Columbus JOHN J.GASSNER, U.S. Army Natick Soldier Center, Natick, Massachusetts THOMAS S.HARTWICK, Consultant, Redmond, Washington ARTHUR H.HEUER, Case Western Reserve Universit y, Cleveland, Ohio FRANK E.KARASZ, University of Massachusetts, Amherst SHEILA F.KIA, General Motors, Warren, Michigan ENRIQUE J.LAVERNIA, University of California, Davis TERRY LOWE, Los Alamos National Laboratory, New Mexico ALAN G.MILLER, Boeing Commercial Airplane Group, Seattle, Washington ROBERT C.PFAHL, JR., National Electronics Manufacturing Initiative, Herndon, Virginia HENRY J.RACK, Clemson University, Clemson, South Carolina LINDA SCHADLER, Rensselaer Polytechnic Institute, Troy, New York JAMES C.SEFERIS, University of Washington, Seattle T.S.SUDARSHAN, Materials Modification, Inc., Fairfax, Virginia JULIA WEERTMAN, Northwestern University, Evanston, Illinois NRC Staff TONI MARECHAUX, Director
ACKNOWLEDGMENTS vii Acknowledgments The staff appreciates the participation of all who attended the workshop and the following individuals who prepared presentations: Todd Allen, Isotag, Inc., Rich Fletcher, MIT, TagSense, Inc., Alan Gelperin, Monell Chemical Senses Center, Stephen Griggs, Defense Advanced Research Projects Agency, Tom Hafer, STA, Inc., Bill Hurley, Inkode, Richard Jotcham, Axess Technologies Ltd., Michael Kolodny, U.S. Army Research Laboratory, Kwan Kwok, Defense Advanced Research Projects Agency, Ray Mariella, Lawrence Livermore National Laboratory, Steven Martin, Sandia National Laboratories, Chris Murphy, NRC Board on Chemical Sciences and Technology, Bill Parker, Diffraction Limited, Dennis Prather, University of Delaware, Alan Rudolph, Defense Advanced Research Projects Agency, Mark Shellans, Pathfinder Technology, Inc., Charles Stevens, Lawrence Livermore National Laboratory, and Jill Trewhella, Los Alamos National Laboratory. This summary has been reviewed by individuals chosen for their diverse perspectives and technical expertise, in accordance with procedures approved by the National Research Council's (NRC) Report Review Committee. The purpose of this independent review is to provide candid and critical comments that will assist the institution in making its published report as sound as possible and to ensure that the report meets institutional standards of objectivity, evidence, and responsiveness to the workshop objectives. The review comments and draft manuscript remain confidential to protect the integrity of the deliberative process. We wish to thank the following individuals for their review of this summary: Aladar A.Csontos, U.S. Nuclear Regulatory Commission, Robert J.Dowding, U.S. Army Research Laboratory, David R.Forrest, Naval Surface Warfare Center, Alton D.Romig, Sandia National Laboratories, and Robert Shull, NIST. The review of this report was overseen by Robert A.Frosch, Harvard University. Appointed by the NRC, he was responsible for making certain that an independent examination of this report was carried out in accordance with institutional procedures and that all review comments were carefully considered. While the individuals listed above provided many constructive comments and suggestions, responsibility for the final content of the summary rests entirely with the rapporteur and the institution.
CONTENTS ix Contents INTRODUCTION 1 TOPIC 1: Security Technologies Overview 3 TOPIC 2: Systems 7 TOPIC 3: Natural Chem/Bio Tags 11 TOPIC 4: Passive Chem/Bio Tags 15 TOPIC 5: Radio/Radar/Optical Tags 19 APPENDIXES A Workshop Participants, Agenda, and Attendees 23 B Biographies of Committee Members 27 C Acronyms 35 D Statement of Task 37