References
Angell, C.A. 1997. “Entropy and fragility in supercooling liquids.” Journal of Research of the National Institute of Standards and Technology 102(2): 171-185.
Bikas, H., P. Stavropoulos, and G. Chryssolouris. 2016. “Additive manufacturing methods and modelling approaches: a critical review.” International Journal of Advanced Manufacturing Technologies 83(1): 389-406. doi:10.1007/s00170-015-7576-2.
Bishop, J. 2004. “Rapid stress analysis of geometrically complex domains using implicit meshing.” Computational Mechanics 30: 46-478.
Brown, A., and D. Baumann. 2012. “Validation of a model for static and dynamic recrystallization in metals.” International Journal of Plasticity 32-33: 17-35.
Carlberg, K., C. Farhat, J. Cortial, and D. Amsallam. 2013. “The GNAT method for nonlinear model reduction: Effective implementation and application to computational fluid dynamics and turbulent flows.” Journal of Computational Physics 242: 623–647.
Contuzzi, N., S. Campanelli, and A.D. Ludovico. 2011. “3D Finite Element Analysis in the Selective Laser Melting Process.” International Journal of Simulation Modelling 10(3):113-121.
Dai, K., X.X. Li, and L.L. Shaw. 2004. “Comparisons between thermal modeling and experiments: effects of substrate preheating.” Rapid Prototyping Journal 10(1): 24-34.
Dehoff, R.R., M.M. Kirka, W.J. Sames, H. Bilheux, A.S. Tremsin, L.E. Lowe, and S.S. Babu. 2015. “Site specific control of crystallographic grain orientation through electron beam additive manufacturing.” Materials Science and Technology 31(8): 931-938.
Denlinger, E.R., and P. Michaleris. 2015. “Mitigation of distortion in large additive manufacturing parts.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. doi: 10.1177/0954405415578580.
Desjardins, O., G. Blanquart, G. Balarac, and H. Pitsch. 2008. “High order conservative finite difference scheme for variable density low Mach number turbulent flow.” Journal of Computational Physics 227(15): 7125–7159.
Doufas, A.K., A.J. McHugh, and C. Miller. 2000. “Simulation of melt spinning including flow-induced crystallization: Part I. Model development and predictions.” Journal of Non-Newtonian Fluid Mechanics 92(1): 27-66.
Doufas, A.K., A.J. McHugh, C. Miller, and A. Immaneni. 2000. “Simulation of melt spinning including flow-induced crystallization: Part II. Quantitative comparisons with industrial spinline data.” Journal of Non-Newtonian Fluid Mechanics 92(1): 81-103.
Dunsky, C. 2014. “Process monitoring in laser additive manufacturing.” Industrial Laser Solutions for Manufacturing 29(5): 14-20.
Fischer, P., V. Romano, H.P. Weber, N.P. Karapatis, E. Boillat, and R. Glardon. 2003. “Sintering of commercially pure titanium powder with a Nd: YAG laser source.” Acta Materialia 51: 1651-1662.
Forrest, J., and M. Ediger. 2014. “Dynamics near Free Surfaces and the Glass Transition in Thin Polymer Films: A View to the Future.” Macromolecules 47(2): 471-478.
Ganeriwala, R., and T.I. Zohdi. 2014. “Multiphysics Modeling and Simulation of Selective Laser Sintering Manufacturing Processes.” Procedia CIRP 14: 299-304.
Gao, W., Y. Zhang, D. Ramanujan, K. Ramani, Y. Chen, C.B. Williams, C.C.L. Wang, Y.C. Shin, S. Zhang, and P.D. Zavattieri. 2015. “The Status, Challenges, and Future of Additive Manufacturing in Engineering.” Computer-Aided Design 69: 65–89.
Ge, T., F. Pierce, D. Periaha, G.S. Grest, and M.O. Robbins. 2013. “Molecular Dynamics Simulations of Polymer Welding: Strength from Interfacial Entanglements.” Physical Review Letters 110: 1-5. doi: 10.1103/PhysRevLett.110.098301.
Ge, T., G.S. Grest, and M.O. Robbins. 2014. “Tensile Fracture of Welded Polymer Interfaces: Miscibility, Entanglements, and Crazing.” Macromolecules 47(19): 6982–6989.
Gray, G.T., V. Livescu1, P.A. Rigg, C.P. Trujillo, C.M. Cady, S.R. Chen, J.S. Carpenter, T.J. Lienert, and S. Fensin. 2015. “Structure/property (constitutive and dynamic strength/damage) characterization of additively manufactured 316L SS.” EPJ Web of Conferences 94(02006): 1-6.
Gurtler, F.J., M. Karg, K.H. Leitz, and M. Schmidt. 2013. “Simulation of laser beam melting of steel powders using the three-dimensional volume of fluid method.” In Lasers in Manufacturing, edited by C. Emmelmann, M.F. Zaeh, T. Graf, and M. Schmidt, 874-879. Amsterdam: Elsevier Science.
Gusarov, A.V., and I. Smurov. 2010. “Modeling the interaction of laser radiation with powder bed at selective laser melting.” Physics Procedia 5: 381-394.
Gusarov, A.V., I. Yadroitsev, P. Bertrand, and I. Smurov. 2009. “Model of radiation and heat transfer in laser-powder interaction zone at selective laser melting.” Journal of Heat Transfer 131(7). doi:10.1115/1.3109245.
Graham, R.S., and P.D. Olmsted. 2009. “Coarse-grained simulations of flow-induced nucleation in semicrystalline polymers.” Physical Review Letters 103(11). doi: 10.1103/PhysRevLett.103.115702.
He, X., P.W. Fuerschbach, and T. DebRoy. 2003. “Heat transfer and fluid flow during laser spot welding of SS 304 stainless steel.” Journal of Physics D: Applied Physics 36: 1388-1398.
Hochleitner, G., T. Jüngst, T.D. Brown, K. Hahn, C. Moseke, F. Jakob, P.D. Dalton, and J. Groll. 2015. “Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing.” Biofabrication 7(3). doi:10.1088/1758-5090/7/3/035002.
Hodge, N.E., R.M. Ferencz, and J.M. Solberg. 2014. “Implementation of a thermomechanical model for the simulation of selective laser melting.” Computational Mechanics 54(1): 33-51.
Hoye, N., H. Li, D. Cuiuri, and A. Paradowska. 2014. “Measurement of residual stresses in titanium, aerospace components formed via additive manufacturing.” Material Science Forum 777:124-129.
Hu, D., and R. Kovacevic. 2003. “Sensing, modeling and control for laser-based additive manufacturing.” International Journal of Machine Tools and Manufacture 43(1): 51–60.
Huang, Z.-M., Y.-Z. Zhang, M. Kotaki, and S. Ramakrishna. 2003. “A review on polymer nanofibers by electrospinning and their applications in nanocomposites.” Composites Science and Technology 63(15): 2223-2253.
Huet, C. 1990. “Application of variational concepts to size effects in elastic heterogeneous bodies.” Journal of the Mechanics and Physics of Solids 38(6): 813-841.
Hussein, A., L. Hao, C. Yan, and R. Everson. 2013. “Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting.” Materials & Design 52: 638-647.
Imran, M.K., S.H. Masood, and M. Brandt. 2010. Influence of Process Parameters in the Direct Metal Deposition of H13 Tool Steel on Copper Alloy Substrate, Proceedings of the World Congress on Engineering 2010, III. http://www.iaeng.org/publication/WCE2010/WCE2010_pp2213-2218.pdf.
Jamshidinia, M., F. Kong, and R. Kovacevic. 2013. “Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V.” Journal of Manufacturing Science and Engineering 135(6). doi: 10.1115/1.4025746.
Juvinall, R.C., and K.M. Marshek. 2006. Fundamentals of machine component design. Vol. 83. New York: John Wiley & Sons.
Khairallah, S.A., and A. Anderson. 2014. “Mesoscopic simulation model of selective laser melting of stainless steel powder.” Journal of Materials Processing Technology 214(11): 2627-2636.
Kim, H.-Y., M. Lee, K.J. Park, S. Kim, and L. Mahadevan. 2010. “Nanopottery: coiling of electrospun polymer nanofibers.” Nano letters 10(6): 2138-2140.
Kim, J. 2012. “Phase-Field Models for Multi-Component Fluid Flows.” Communications in Computational Physics 12(3): 613-661.
King, W., A.T. Anderson, R.M. Ferencz, N.E. Hodge, C. Kamath, and S.A. Khairallah. 2015. “Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory.” Materials Science and Technology 31(8): 957-968.
Klassen, A., T. Scharowsky, and C. Körner. 2014. “Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods.” Journal of Physics D-Applied Physics 47(27). doi: 10.1088/0022-3727/47/27/275303.
Kobryn, P.A., E.H. Moore, and S.L. Semiatin. 2000. “The effect of laser power and traverse speed on microstructure, porosity and build height in laser-deposited Ti-6Al-4V.” Scripta Materialia 43(4): 299-305.
Kobryn, P.A., and S.L. Semiatin. 2001. Mechanical properties of laser-deposited Ti-6Al-4V. Proceedings of the 11th Solid Freeform Fabrication Symposium, University of Texas at Austin, August.
Kolossov, S., E. Boillat, R. Glardon, P. Fischer, and M. Locher. 2004. “3D FE simulation for temperature evolution in the selective laser sintering process.” International Journal of Machine Tools and Manufacture 44:117-123.
Körner, C., E. Attar, and P. Heinl. 2011. “Mesoscopic simulation of selective beam melting processes.” Journal of Materials Processing Technology 211(6): 978-987.
Körner, C., A. Bauereiß, and E. Attar. 2013. “Fundamental consolidation mechanisms during selective beam melting of powders.” Modelling and Simulation in Materials Science 21(8). doi:10.1088/0965-0393/21/8/085011.
Krol, T. A., G. Branner, and M.F. Zaeh. 2009. “A three dimensional FE-model for the investigation of transient physical effects in selective laser melting.” In Innovative Developments in Design and Manufacturing. edited by P.J. da Silva Bartolo, et al., 415- 424. Boca Raton: CRC Press.
Kundin, J., E. Pogorelov, and H. Emmerich. 2015. “Numerical investigation of the interaction between the martensitic transformation front and the plastic strain in austenite.” Journal of the Mechanics and Physics of Solids 76: 65-83.
Lavery, L., E. Harris, J. Gelb, and A. Merkle. 2015. “Recent advancements in 3D X-ray microscopes for additive manufacturing.” Microscopy and Microanalysis 21 (S3): 131-132.
Lee, Y., M. Nordin, S.S. Babu, and D.F. Farson. 2014. “Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition.” Metallurgical and Materials Transactions B 45(4): 1520-1529.
Leinenbach, C. 2015. Material Aspects in Metal Additive Manufacturing: Challenges, Opportunities, Visions. LANL Workshop, Santa Fe, July 20-21. https://www.lanl.gov/projects/national-security-education-center/institute-for-materials-science/_assets/docs/am15-presentations/Leinenbach-Christian-Presentation-Slides.pdf.
Liu, D.L., C.J. Jing, Y.Y. Liu, and Q.X. Hu. 2011. “Algorithm Research of Pattern Recognition for Process Control of Electrospinning.” Advanced Materials Research 314-316: 1987-1990.
Liu, F., X. Lin, C. Huang, M. Song, G. Yang, J. Chen, and W. Huang. 2011. “The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718.” Journal of Alloys and Compounds 509(13): 4505-4509.
Louvis, E., P. Fox, and C.J. Sutcliffe. 2011. “Selective laser melting of aluminium components.” Journal of Materials Processing Technology 211(2): 275–284.
Magnusen, P.E., R.J. Bucci, A.J. Hinkle, J.R. Brockenbrough, and H.J. Konish. 1997. “Analysis and prediction of microstructural effects on long-term fatigue performance of an aluminum aerospace alloy.” International Journal of Fatigue 19(Supp. 1): S275-S283.
Markl, M., R. Ammer, U. Rüde, and C. Körner. 2015. “Numerical Investigations on Hatching Process Strategies for Powder Bed Based Additive Manufacturing using an Electron Beam.” The International Journal of Advanced Manufacturing Technology 78(1): 239-247.
Martinez-Prieto, N., M. Abecassis, J. Xu, P. Guo, J. Cao, and K.F. Ehmann. 2015. “Feasibility of Fiber-Deposition Control by Secondary Electric Fields in Near-Field Electrospinning.” Journal of Micro and Nano-Manufacturing 3(4). doi: 10.1115/1.4031491.
Masubuchi, K. 1980. Analysis of welded structures: Residual stresses, distortion, and their consequences. Oxford: Pergamon Press.
Matsumoto, M., M. Shiomi, K. Osakada, and F. Abe. 2002. “Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing.” International Journal of Machine Tools and Manufacture 42: 61-67.
Mazumder, J. 2015. “Design for metallic additive manufacturing machine with capability for ‘Certify as You Build’,” CIRP 25th Design Conference Innovation Product Creation, Procedia CIRP 36 pp.187-192.
Miller, M., and P. Liaw. 2008. Bulk metallic glasses. New York: Springer.
Ming, T., P.C. Pistorius, and J. Beuth. 2015. “Geometric model to predict porosity of part produced in powder bed system,” Forum on Materials Science and Technology, October 4-5, Columbus, O.H.
Neugebauer, F., N. Keller, V. Ploshikhin, F. Feuerhahn, and H. Köhler. 2014a. “Multi Scale FEM Simulation for Distortion Calculation in Additive Manufacturing of Hardening Stainless Steel,” BIAS International Workshop on Thermal Forming and Welding Distortion, April 9-10, Bremen, Germany.
Neugebauer, F., N. Keller, H. Xu, C. Kober, V. Ploshikhin. 2014b. “Simulation of Selective Laser Melting Using Process Specific Layer Based Meshing, DDMC 2014.” Proceedings of the Fraunhofer Direct Digital Manufacturing Conference, March 12-13, Aachen, Germany, 297-302.
Nie, H.-L., X. Dou, Z. Tang, H.D. Jang, and J. Huang. 2015. “High-Yield Spreading of Water-Miscible Solvents on Water for Langmuir–Blodgett Assembly.” Journal of the American Chemical Society 137 (33): 10683–10688.
Pal, D., N. Patil, K. Zeng, and B. Stucker. 2014. An Integrated Approach to Additive Manufacturing Simulations Using Physics Based, Coupled Multiscale Process Modeling. Journal of Manufacturing Science and Engineering-Transactions 136(6): 061022.
Parietti, L., and K. Lam. 2006. Validation of a Multi-Physics Software Package for Simulations of Pulsed Laser Welding at Los Alamos National Laboratory. LA-UR-06-7622.
Raghavan, N., R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner, N. Carlson, and S.S. Babu. 2016. “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing.” Acta Materialia 112: 303–314. doi:10.1016/j.actamat.2016.03.063.
Roberts, I.A., C.J. Wang, R. Esterlein, M. Stanford, and D.J. Mynors. 2009. “A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing.” International Journal of Machine Tools and Manufacture 49: 916-923.
Samatham, R., and K.J. Kim. 2006. “Electric current as a control variable in the electrospinning process.” Polymer Engineering and Science 46(7): 954-959.
Scelsi, L., M.R. Mackley, H. Klein, P.D. Olmsted, R.S. Graham, O.G. Harlen, and T.C.B. McLeish. 2009. “Experimental observations and matching viscoelastic specific work predictions of flow-induced crystallization for molten polyethylene within two flow geometries.” Journal of Rheology 53(4): 859-876.
Schillinger, D., and M. Ruess. 2015. “The Finite Cell Method: A review in the context of higher-order structural analysis of CAD and image-based geometric models.” Archives of Computational Methods in Engineering 22(3): 391-455.
Schilp, J., C. Seidel, H. Krauss, and J. Weirather. 2014. “Investigations on Temperature Fields during Laser Beam Melting by Means of Process Monitoring and Multiscale Process Modelling.” Advances in Mechanical Engineering 6. doi: 10.1155/2014/217584.
Seidel, C., M.F. Zaeh, M. Wunderer, J. Weirather, T.A. Krol, and M. Ott. 2014. “Simulation of the Laser Beam Melting Process—Approaches for an Efficient Modelling of the Beam-material Interaction.” Procedia CIRP 25: 146-153.
Sherman, B., H.-C. Liou, and O. Balogun. 2015. “Thin Film Interface Stresses Produced By Laser Generated Surface Acoustic Waves.” Journal of Applied Physics 118. doi:10.1063/1.4931937.
Slotwinski, J.A., E.J. Garboczi, and K.M. Hebenstreit. 2014. “Porosity measurements and analysis for metal additive manufacturing process control.” Journal of Research of the NIST 119: 494-528.
Song, L., V. Bagavath-Singh, B. Dutta, and J. Mazumder. 2012. “Control of melt pool temperature and deposition height during direct metal deposition process.” The International Journal of Advanced Manufacturing Technology 58(1): 247-256.
Sterling, A.J., B. Torries, M. Lugo, N. Shamsaei, and S.M. Thompson. 2015. “Fatigue Behavior of Ti-6Al-4V Alloy Additively Manufactured by Laser Engineered Net Shaping,” 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, January 5-9, Kissimmee, F.L.
Susan, D.F., J.D. Puskar, J.A. Brooks, and C.V. Robino. 2006. “Quantitative characterization of porosity in stainless steel LENS powders and deposits.” Materials Characterization 57(1): 36-43.
Tang, L., Z. Ruan, R.G. Landers, and F.W. Liou. 2008. “Variable Powder Flow Rate Control in Laser Metal Deposition Processes.” ASME Journal of Manufacturing Science and Engineering 130(4). doi:10.1115/1.2953074.
Telford, M. 2004. “The case for bulk metallic glass.” Materials Today 7(3): 36-43.
Tenenbaum, J.B., V. de Silva, and J.C. Langford. 2000. “A Global Geometric Framework for Nonlinear Dimensionality Reduction.” Science 290: 2319-2323.
Thijs, L., K. Kempen, J.-P. Kruth, and J. Van Humbeeck. 2013. “Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder.” Acta Materialia 61: 1809-1819.
Tolochko, N.K., M.K. Arshinov, A.V. Gusarov, V.I. Titov, T. Laoui, and L. Froyen. 2003. “Mechanisms of selective laser sintering and heat transfer in Ti powder.” Rapid Prototyping Journal 9: 314-32.
Wang, X., G. Zheng, L. Xu, W. Cheng, B. Xu, Y. Huang, and D. Sun. 2012. “Fabrication of nanochannels via near-field electrospinning.” Applied Physics A 108(4): 825-828.
Williams, J.D., and C.R. Deckard. 1998. “Advances in modeling the effects of selected parameters on the SLS process.” Rapid Prototyping Journal 4: 90-100.
Wolff, S., T. Lee, E. Faierson, K. Ehmann, and J. Cao. 2016. Anisotropic Properties of Directed Energy Deposition (DED)-Processed Ti-6Al-4V, SME North American Manufacturing Research Conference (NAMRC), June 27-July 1, Blacksburg, V.A.
Wu, A., D. Brown, M. Kumar, G. Gallegos, and W. King. 2014. Additive Manufacturing Induced Residual Stresses: An Experimental Investigation. TMS 143rd Annual Meeting & Exhibition, February 16-20, San Diego, C.A.
Wu, H., L. Hu, M.W. Rowell, D. Kong, J.J. Cha, J.R. McDonough, J. Zhu, Y. Yang, M.D. McGehee, and Y. Cui. 2010. “Electrospun metal nanofiber webs as high-performance transparent electrode.” Nano letters 10(10): 4242-4248.
Yan, W., J. Smith, W. Ge, F. Lin, and W.K. Liu. 2015. “Multiscale modeling of electron beam and substrate interaction: a new heat source model.” Computational Mechanics 56(2): 265-276.
Zaeh, M., and G. Branner. 2010. “Investigations on residual stresses and deformations in selective laser melting.” Production Engineering 4: 35-45.
Zheng, G., W. Li, X. Wang, D. Wu, D. Sun, and L. Lin. 2010. “Precision deposition of a nanofibre by near-field electrospinning.” Journal of Physics. D. Applied Physics 43(41). doi:10.1088/0022-3727/43/41/415501.
Zhong, C., T. Biermann, A. Gasser, and R. Poprawe. 2015. “Experimental study of effects of main process parameters on porosity, track geometry, deposition rate, and powder efficiency for high deposition rate laser metal deposition.” Journal of Laser Applications 27(4). doi: 10.2351/1.4923335.
Zhou, X., X. Liu, D. Zhang, Z. Shen, and W. Liu. 2015. “Balling phenomena in selective laser melted tungsten.” Journal of Materials Processing Technology 222: 33-42.
This page intentionally left blank.
This page intentionally left blank.
