National Academies Press: OpenBook

Manufacturing Systems: Foundations of World-Class Practice (1992)

Chapter: Consolidated Bibliography

« Previous: Jazz: A Metaphor for High-Performance Teams
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Consolidated Bibliography

Abernathy, W. J. , and K. Wayne. 1974. Limits of the learning curve. Harvard Business Review September-October : 109-119.

Adler, P. S. , and K. B. Clark , 1991. Behind the learning curve: A Sketch of the learning process. Management Science 37(3) : 267-281.

Allaire, Y. , and M. Firsirotu. 1984. Theories of organizational culture. Organization Studies 5 : 193-226.

Allan, G. B. 1975. Note on the Use of Experience Curves in Competitive Decision Making in Harvard Business School Note 9-175-174.

Allen, T. J. 1977. Managing the Flow of Technology. Cambridge, Mass.: MIT Press.

American Supplier Institute. 1989. Seventh symposium on Taguchi methods. Dearborn, Mich.: ASI Press.

Amstead, B. J. , P. F. Ostwald , and M. L. Begeman. 1977. Manufacturing Processes , 7th ed. New York : John Wiley & Sons. Cited in Hayes, R. H. , and S.C. Wheelwright. 1984. Restoring Our Competitive Edge: Competing Through Manufacturing. New York : John Wiley & Sons.

Argote, L. , and D. Epple. 1990. Learning curves in manufacturing. Science 247 : 920-924.

Argyris, C. 1991. Teaching Smart People How to Learn. Harvard Business Review May-June.

Argyris, C. , and D. A. Schon. 1978. Organizational Learning: A Theory of Action Perspective. New York : Addison-Wesley.

Baker, K. R. 1974. Introduction to Sequencing and Scheduling. New York : Wiley & Sons.

Balliett, W. 1986. American Musicians. New York : Oxford University Press.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Bastien, D. T. , and T. J. Hostager. 1988. Jazz as a process of organizational innovation. Communication Research 15: 5.

Bate, P. 1984. The impact of organizational culture on approaches to organizational problem solving. Organizational Studies 5 : 43-66.

Bateson, G. 1972. Steps to an Economy of Mind. New York : Ballantine Books.

Baudin, M. 1990. Manufacturing Systems Analysis. Englewood Cliffs, N.J. Yourdon Press :.

Bechte, W. 1988. Theory and practice of load-oriented manufacturing control. International Journal of Production Research 26 : 375-395.

Blackstone, J. H. 1989. Capacity Management. Carlsbad, Calif. : Southwestern Press.

Blackstone, J. H. , Phillips, D. T. , and G. L. Hogg. 1982. A state-of-the-art survey of dispatching rules for manufacturing job shop operations. International Journal of Production Research

Blake, R. R. , and J. S. Mouton. 1981. Productivity: The Human Side. New York : AMACOM.

Bloch, E. 1985. Manufacturing technologies. The Bridge 15(Fall) : 10-15.

Bloch, E. 1991. Toward a U.S. Technology Strategy : Enhancing Manufacturing Competitiveness. Discussion paper no. 1, The Manufacturing Forum. Washington, D.C. : National Academy Press.

Bougon, M., K. Weick , and D. Binkhorst. 1977. Cognition in organizations : An analysis of the Utrecht Jazz Orchestra. Administrative Science Quarterly 22 : 610.

Brech, E. F. L. 1958. Organization, The Framework of Management. London : Longmans, Green and Co.

Bridges, W. 1988. Surviving Corporate Transition. New York : Doubleday and Company.

Buchholz, S. , and T. Roth. 1987. Creating the High Performance Team. New York : John Wiley & Sons, Inc.

Buck, J. R. , J. M. A. Tanchoco , and A. L. Sweet. 1976. Parameter estimation methods for discrete exponential learning curves. AIIE Transactions 8(2) : 184-194.

Camp, R. C. 1989. Benchmarking: The Search for Industry Best Practices that Lead to Superior Performance. Milwaukee, Wisc.: Quality Press.

Chew, W. B. , T. F. Bresnahan , and K. B. Clark. 1990. Measurement, coordination,and learning in a multiplant network. Pp. 129-162 in Measures for Manufacturing Excellence. R. S. Kaplan , ed. Boston, Mass.: Harvard Business School Press.

Clark, G. M. , and D. H. Withers. 1989. Architecture for an integrated simulation/CIM system. Pp. 942-948 in the Proceedings of the 1989 Winter Simulation Conference, E. A. MacNair , K. J. Musselman , and P. Heidelberg , eds. Washington D.C.

Clark, K. B. , and T. Fujimoto. 1989a. Overlapping problem solving in product development. Pp. 127-152 in Managing International Manufacturing , K. Ferdows , ed. North Holland : Elsevier Science Publishers B.V.

Clark, K. B. , and T. Fujimoto. 1989b. Reducing the time to market: The case of the world auto industry. Design Management Journal 1: 49-57.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Clark, K. B. , and T. Fujimoto. 1991. Product Development Performance. Cambridge, Mass.: Harvard Business School Press.

Cohen, S. S. , and J. Zysman. 1988. Manufacturing innovation and american industrial competitiveness. Science 239 : 1110-1115.

Compton, W. D. , ed. 1988. Design and Analysis of Integrated Manufacturing Systems. Washington D.C. : National Academy Press.

Conway, R. W. , W. L. Maxwell , and L. W. Miller. 1967. Theory of Scheduling. Reading, Mass.: Addison-Wesley.

Cook, H.E. 1991. On competitive manufacturing enterprises II: S-model paradigms. Manufacturing Review June.

Cook, H. E. , and R. E. DeVor. 1991. On competitive manufacturing enterprises I:The S-model and the theory of quality. Manufacturing Review June.

Cooper, K. G. 1980. Naval ship production: A claim settled and a framework built. Interfaces 10(6) : 20-36.

Cooper, R. , and R. S. Kaplan. 1991. Profit priorities from activity-based costing. Harvard Business Review May-June.

Copley, F. B. 1923. Frederick W. Taylor: Father of Scientific Management , 2 Vols. New York : Harper & Row.

Crow, B. 1990. Jazz Anecdotes. New York : Oxford University Press.

Davis, S. 1987. Future Perfect. Reading, Mass.: Addison-Wesley.

Dertouzos, M. L. , R. K. Lester , R. M. Solow , and the MIT Commission on Industrial Productivity. 1989. Made In America : Regaining the Productive Edge. Cambridge, Mass.: The MIT Press. Development Project Study. Manufacturing Vision Group

Dixon, J. R. , A. J. Nanni , and T. E. Vollmann. 1990. The New Performance Challenge: Measuring Operations for World-Class Competition. Homewood , Illinois: Dow Jones-Irwin.

Drucker, P. F. 1985. Innovation and Entrepeneurship: Practice and Principles. New York : Harper & Row.

Drucker, P.F. 1988a. The coming of the new organization. Harvard Business Review January-February.

Drucker, P.F. 1988b. Management and the world's work. Harvard Business Review September-October.

Drucker, P. F. 1990. The emerging theory of manufacturing. Harvard Business Review May-June.

Ealey, L.A. 1988. Quality by Design. Dearborn, Mich.: ASI Press.

Eccles, R.G. 1991. The performance measurement manifesto. Harvard Business Review January-February.

Edmondson, H. E. , and S. C. Wheelwright. 1989. Outstanding manufacturing in the coming decade. California Management Review , Vol. 31 , Number 4.

Eisenberg, E. 1990. Jamming, transcendence through organizing. Communication Research 17 : 139.

Evans, J. R. , D. R. Anderson , D. J. Sweeney , and T. A. Williams. 1984. Applied Production and Operations Management. St. Paul, Minn.: West Publishing Company.

Evans, J. R. , and W. M. Lindsay. 1989. The Management and Control of Quality. St. Paul, Minn.: West Publishing Company.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Fallon, M. 1986. The seven zeroes of JIT. Managing Automation May : 76.

Foster, R. N. 1982. A call for vision in managing technology. Business Week , May 24.

Foster, R. 1986. Innovation, the Attacker's Advantage. Summit Books.

French, S. 1982. Sequencing and Scheduling. Chichester, United Kingdom : Ellis-Horwood.

Galbraith, J. R. 1977. Organization Design. Reading, Mass.: Addison-Wesley.

Garvin, D.A. 1984. What does ‘product quality' really mean? Sloan Management Review Fall : 25-43.

Gibson, J. E. 1981. Management style and structure. Chapter in Managing Research and Development. New York : Wiley.

Gomory, R. E. , and R. Schmitt. 1988. Science and product. Science 240(26May) : 1131.

Grassman, W. K. 1986. Is the fact that the emperor wears no clothes a subject worthy of publication? Interfaces 16(2) : 43-51.

Greene, J. , ed. 1987. Production and Inventory Control Handbook , 2nd ed. New York : McGraw-Hill.

Haas, E.A. 1987. Breakthrough manufacturing. Harvard Business Review March-April.

Hackman, J. R. , ed. 1990. Groups That Work (and Those That Don't). San Francisco : Jossey-Bass Publishers.

Harrington, J. 1984. Understanding the Manufacturing Process. New York : Marcel Dekker, Inc.

Harrington, J., Jr. 1973. Computer-Integrated Manufacturing. Melbourne, Fla.: Robert E. Krieger Publishing Company.

Hatvany, J. , 1983. The efficient use of deficient knowledge. Annals of CIRP 32(1) : 423-425.

Hauser, J. R. , and D. Clausing. 1988. The house of quality. Harvard Business Review May-June : 66-73.

Hax, A. C. , and N. S. Majluf. 1984. Strategic Management. Englewood Cliffs,N.J.: Prentice-Hall.

Hayes, R. H. , and R. Jaikumar. 1988. Manufacturing's crisis : New technologies,obsolete organizations. Harvard Business Review September-October : 77-84.

Hayes, R. H. , and S. C. Wheelwright. 1984. Restoring Our Competitive Edge:Competing Through Manufacturing. New York : John Wiley & Sons.

Hayes, R. H. , S. C. Wheelwright , and K. B. Clark. 1988. Dynamic Manufacturing:Creating the Learning Organization. New York : The Free Press.

Helland, D. 1990. Wynton, prophet in standard time. Downbeat 57(9) : 16-19.

Henderson, B. , and F. K. Levy. 1965. Adaptation in the production process. Management Science 11 (6) : B 136-B 154.

Hiltz, S. R. , and M. Turoff. 1978. The Network Nation. Reading, Mass.: Addison-Wesley.

Hopp, W. J. , M. L. Spearman , and D. L. Woodruff. 1990. Practical strategies for lead time reduction. Manufacturing Review 3(2) : 78-84.

Horvath, M. 1988. Manufacturing engineering: The birth and growth of a new science. Robotics & Computer-Integrated Manufacturing 4(1/2).

Hounshell, D. A. 1984. From the American System to Mass Production 1800-1932 :

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

The Development of Manufacturing Technology in the United States. Baltimore : The Johns Hopkins University Press.

House, C. H. , and R. L. Price. 1991. The Return Map: Tracking Product Teams. Harvard Business Review January-February : 92-100.

Houston, T.R. 1985. Why models go wrong. Byte 10(10) : 151-164.

Howard, W. G., Jr. , and B. R. Guile , eds. 1992. Profiting From Innovation. New York : The Free Press.

Hughes, B. 1989. Comments at International Symposium of Jazz Educators. Workshop. San Diego, Calif.

Imai, M. 1986. Kaizen (Ky'zen): The Key to Japan's Competitive Success. New York : McGraw-Hill Publishing Company.

International Business Machines. 1987. Computer Aided Manufacturing, An IBM Perspective. International Business Machines.

International Business Machines. 1989. Computer Aided Manufacturing, The CIM Enterprise. International Business Machines.

Jaikumar, R. 1986. Postindustrial manufacturing. Harvard Business Review November-December : 69–76.

Johnson, H. T. , and R. S. Kaplan. 1987. Relevance Lost: The Rise and Fall of Management Accounting. Boston, Mass.: Harvard Business School Press.

Kanet, J. J. , and H. H. Adelsberger. 1987. Expert systems in production scheduling. European Journal of Operational Research 29 : 51-59.

Kantrow, A., et al. 1983. Survival Strategies for American Industry. New York : Wiley.

Kaplan, R. S. , ed. 1990. Measures for Manufacturing Excellence. Boston, Mass.: Harvard Business School Press.

Kelly, M. R. and H. Brooks. 1991. External learning opportunities and the diffusion of process innovations to small firms. Technological Forecasting and Social Change 39 : 103-125.

Koska, D. K. , and J. D. Romano. 1988. Countdown to the Future: The Manufacturing Engineer in the 21st Century. Society of Manufacturing Engineers.

Lawler, E. E. III. 1986. High Involvement Management. San Francisco : Jossey-Bass Publishers.

Leong, G. K. , D. L. Snyder , and P. T. Ward. 1990. Research in the process and content of manufacturing strategy. Omega 18 : 109-122.

Little, J. D.C. 1970. Models and managers: The concept of a decision calculus. Management Science 16(8) : B466-485.

Loucks, V. R., Jr. 1990. Measuring success across the '90s. Review 1 : 15-18.

Malcolm Baldrige National Quality Award. 1991. U.S. Department of Commerce , National Institute of Standards and Technology.

Malone, T. W. 1988. What is coordination theory. Working Paper 2051-88. Sloan School of Management , Massachusetts Institute of Technology , Cambridge, Mass.

Mandel, H. 1989. Dave Holland , creative collaborator. Downbeat 56(1) : 20-23.

March, J. G. , and H. A. Simon. 1958. Organizations. New York : John Wiley and Sons, Inc.

Maxwell, W. L. , Muckstadt, J. A. , Thomas, L. J. , and J. VanderEecken. 1983. A modeling framework for planning and control of production in discrete partsmanufacturing and assembly systems. Interfaces 13 : 92-104.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Merchant, M. E. 1961. The manufacturing-system concept in production engineering research. Annals of CIRP 2(1) : 77-83.

Merchant, M. E. 1988. The precepts and sciences of manufacturing. Robotics & Computer-Integrated Manufacturing 4(1/2) : 1-6.

Miller, G.A. 1956. The magical number seven, plus or minus two. Psychological Review 63 : 81.

Mintzberg, H. 1978. The Structuring of Organizations. A Synthesis of the Research. Englewood Cliffs, N.J.: Prentice-Hall, Inc.

Mize, J. H. , and T. G. Beaumariage. 1988. A nation at risk: Our eroding skill base in manufacturing systems. Pp. 42-51 in The Challenge to Manufacturing : A Proposal for a National Forum. Washington, D.C. : National Academy of Engineering.

Moody, P. E. , ed. 1990. Strategic Manufacturing. Homewood, Ill. : Dow Jones-Irwin.

Nadler, G. , and G. H. Robinson. 1983. Design of the automated factory: More than robots. Annals of the American Academy of Political and Social Science 470(November).

National Academy of Engineering. 1985. Education for the Manufacturing World of the Future. Washington, D.C. : National Academy Press.

National Academy of Engineering . 1988. The Technological Dimensions of International Competitiveness. Washington, D.C. : National Academy Press.

National Academy of Engineering. 1991. National Interests in an Age of Global Technology. Washington, D.C. : National Academy Press.

National Center for Manufacturing Sciences. 1990. Competing in World-class Manufacturing : America's 21st Century Challenge. Homewood, Ill. : Business One Irwin.

National Institute of Standards and Technology. 1991. Application Guidelines:Malcolm Baldrige National Quality Award. U.S. Department of Commerce.

National Research Council. 1986. Toward a New Era in U.S. Manufacturing: The Need for a National Vision. Washington, D.C. : National Academy Press.

National Research Council. 1990. The Internationalization of U.S. Manufacturing:Causes and Consequences. Washington, D.C. : National Academy Press.

National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Committee on Analysis of Research Directions and Needs in U.S. Manufacturing. Washington, D.C. : National Academy Press.

National Research Council. 1991. Improving Engineering Design. Washington ,D.C. : National Academy Press.

Nevins, J. L. , and D. E. Whitney. 1989. Concurrent Design of Products and Processes. New York : McGraw-Hill.

Nonaka, I. 1988. Toward middle-up-down management: Accelerating information creation. Sloan Management Review.

Nonaka, I. 1989. Creating organizational order out of chaos: Self-renewal in Japanese firms. California Management Review.

Orlicky, J. A. 1975. Material Reqiurements Planning. New York : McGraw-Hill.

Passmore, W. A. 1988. Designing Effective Organizations. New York : John Wiley & Sons.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Pegals, C. C. 1969. On startup or learning curves: An expanded view. 1(3) : 216-222.

Peters, T. 1987. Thriving on Chaos : Handbook for a Management Revolution. New York : Prentice Hall.

Phadke, M. S. 1989. Quality Engineering Using Robust Design. New York : Prentice Hall.

Pirsig, R. M. 1974. Zen and the Art of Motorcycle Maintenance : An Inquiry Into Values. Toronto : Bantam Books.

Prahalad, C. K. , and G. Hamel. 1990. The core competence of the corporation. Harvard Buiness School May-June.

Pritsker, A. A. B. 1986a. Introduction to Simulation and SLAM II. New York : Wiley & Sons ; West Lafayette, Ind. : Systems Publishing Corporation.

Pritsker, A. A. B. 1986b. Model evolution: A rotary index table case history. Pp.703-707 in Proceedings of the 1986 Winter Simulation Conference, J. R. Wilson, J. O. Henriksen , and S. D. Roberts , eds. Washington, D.C.

Pritsker, A. A. B. 1990. Papers, Experiences, Perspectives. West Lafayette, Ind. : Systems Publishing Corporation.

Pritsker, A. A. B. , C. E. Sigal , and R. D. J. Hammesfahr. 1989. SLAM II Network Models for Decision Support. Englewood Cliffs, N.J. : Prentice Hall.

Pritsker Corporation. 1989. FACTOR Implementation Guide , Version 4.0. West Lafayette, Ind. : Pritsker Corporation.

Pritsker Corporation . 1990. SLAMSYSTEM User's Guide. West Lafayette, Ind. : Pritsker Corporation.

Quinn, J. B. 1983. U.S. Leadership in Manufacturing. National Academy of Engineering 18th Annual Meeting Proceedings , November 4 , 1982. Washington, D.C. : National Academy Press.

Reich, R. B. 1991. The Work of Nations: Preparing Ourselves for 21st-Century Capitalism. New York : Alfred A. Knopf.

Reinertsen, D. G. 1983. Whodunit? The search for the new-product killers. Electronic Business 9(8) : 62-64.

Report of the National Critical Technologies Panel. 1991. Washington, D.C. : Superintendent of Documents, U.S. Government Printing Office.

Rosenthal, D. 1986. Conversation with Art Blakey. The Black Perspective in Music 14 : 282.

Schein, E. H. 1969. Process Consultation: Its Role in Organizational Development. Reading, Mass.: Addison-Wesley.

Schneiderman, A. M. 1988. Setting quality goals. Quality Progress April : 51-57.

Schonberger, R.J. 1986. World Class Manufacturing: The Lessons of Simplicity Applied. New York : The Free Press.

Schonberger, R. J. 1987. World Class Manufacturing Casebook : Implementing JIT and TQC. New York : The Free Press.

Senge, P.M. 1990. The Fifth Discipline. New York : Doubleday/Currency.

Shapiro, N. , and N. Hentoff . 1955. Hear Me Talkin' to Ya. New York : Holt , Rinehart, & Winston Inc.

Shingo, S. 1985. A Revolution in Manufacturing: The SMED System. Cambridge, Mass.: Productivity Press.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

Shingo, S. 1988. Non-Stock Production: The Shingo System for Continuous Improvement. Cambridge, Mass.: Productivity Press.

Shingo, S. 1989. A Study of the Toyota Production System from an Industrial Engineering Viewpoint. Cambridge, Mass.: Productivity Press.

Simon, H. A. 1957. Administrative Behavior. 2nd ed. New York : The Free Press.

Simon, H. A. 1976. Administrative Behavior. New York : The Free Press.

Simon, H. A. 1990. Prediction and prescription in systems modeling. Operations Research 38 : 7-14.

Society of Manufacturing Engineers. 1984. Group Technology at Work. N.L.Hyer , ed. Dearborn, Mich.: Society of Manufacturing Engineers.

Sohlenius, G. , 1984. Scientific and Structural Base of Manufacturing. Robotics & Computer-Integrated Manufacturing 1(3/4) : 389–396.

Stalk, G., Jr. , and T. M. Hout. 1990. Competing Against Time. New York : The Free Press.

Stata, R. 1989. Organizational learning—The key to management innovation. Sloan Management Review Spring.

Stevens, C.H. 1989. Cotechnology for the global 90s. Management in the 1990s Working Paper 89-074. Sloan School of Management, Massachusetts Institute of Technology , Cambridge, Mass.

Stewart, T. A. 1991. The new American century : Where we stand. Fortune Magazine, Special Issue, Spring/Summer.

Striving for Manufacturing Excellence. 1990. AT&T Technical Journal 69(4)July/August.

Sullivan, E. 1986. OPTIM : Linking cost, time and quality. Quality Progress April : 52-55.

Taguchi, G. , and Y. Wu. 1980. Introduction to Off-Line Quality Control. Nagoya : Central Japan Quality Association.

Taguchi, G. , E. A. Elsayed , and T. C. Hsiang . 1989. Quality Engineering in Production Systems. New York : McGraw-Hill Book Company.

Taylor, F.W. 1911. Shop Management. New York : Harper Brothers.

Taylor, F. W. 1934. The Principles of Scientific Management. New York : Harper Brothers.

Textile World. 1989. World class manufacturers cut labor needs in half. October : 71-76.

Thurow, L. 1992. Head to Head : Coming Economic Battles Between Japan, Europe, and America. New York : Morrow and Co.

Tushman, M. L. , and W. L. Moore , eds. 1988. Readings in the Management of Innovation. Cambridge, Mass.: Ballinger Publishing Company.

Tversky, A. , and D. Kahneman. 1981. The framing of decisions and psychology of choice. Science 211(30 January) : 453-458.

Voelcker, H. B. , A. A. G. Requicha , and R. W. Conway. 1988. Computer applications in manufacturing. Annual Review of Computer Science 3 : 349-387.

Vollmann, T. E. , Berry, W. L. , and D. C. Whybark. 1988. Manufacturing Planning and Control Systems , 2nd ed. Homewood, Ill.: Dow Jones-Irwin.

Voyer, J. J. , and R. R. Faulkner. 1989. Organizational cognition in a jazz ensemble. Empirical Study of the Arts 7: 57-77.

Walker, A. H. , and J. W. Lorsch. 1970. Organizational choice: Product versus

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×

function Pp. 36-53 in Studies in Organization Design. J. W. Lorsch and P. R. Lawrence , eds. Homewood, Ill.: Richard D. Irwin, Inc. , and The Dorsey Press.

Walton, R. E. 1969. Interpersonal Peacekeeping: Confrontation in Third Party Consultation. Reading, Mass.: Addison-Wesley.

Whitney, D.E. 1988. Manufacturing by Design. Harvard Business Review July-August.

Whitt, W. 1983. The queueing network analyzer. Bell System Technical Journal 62(9) : 2779-2815.

Wight, O.. Production and Inventory Management in the Computer Age. Boston, Mass.: Cahners Publishing Co.

Wills, G. , and C. Cooper. 1988. Pressure Sensitive. Beverly Hills, Calif.: Sage Publications.

Womack, J.P. , D. T. Jones , and D. Roos. 1990. The Machine that Changed the World. New York : Rawson Associates.

Wright, T. P. 1936. Factors affecting the cost of airplanes. Journal of Aeronautical Science 3 : 122-128.

Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 245
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 246
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 247
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 248
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 249
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 250
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 251
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 252
Suggested Citation:"Consolidated Bibliography." National Academy of Engineering. 1992. Manufacturing Systems: Foundations of World-Class Practice. Washington, DC: The National Academies Press. doi: 10.17226/1867.
×
Page 253
Next: Committee Membership »
Manufacturing Systems: Foundations of World-Class Practice Get This Book
×
Buy Paperback | $50.00 Buy Hardback | $50.00
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Some 70 percent of U.S. manufacturing output currently faces direct foreign competition. While American firms understand the individual components of their manufacturing processes, they must begin to work with manufacturing systems to develop world-class capabilities.

This new book identifies principles--termed foundations--that have proved effective in improving manufacturing systems. Authored by an expert panel, including manufacturing executives, the book provides recommendations for manufacturers, leading to specific action in three areas:

  • Management philosophy and practice.
  • Methods used to measure and predict the performance of systems.
  • Organizational learning and improving system performance through technology.

The volume includes in-depth studies of several key issues in manufacturing, including employee involvement and empowerment, using learning curves to improve quality, measuring performance against that of the competition, focusing on customer satisfaction, and factory modernization. It includes a unique paper on jazz music as a metaphor for participative manufacturing management.

Executives, managers, engineers, researchers, faculty, and students will find this book an essential tool for guiding this nation's businesses toward developing more competitive manufacturing systems.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!